From: Jon Hunter <jonathanh-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
To: Laxman Dewangan
<ldewangan-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>,
Vinod Koul <vinod.koul-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Cc: Thierry Reding
<thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
dmaengine-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Jon Hunter <jonathanh-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
Subject: [PATCH V2] dmaengine: tegra-apb: Really fix runtime-pm usage
Date: Tue, 6 Jun 2017 13:49:29 +0100 [thread overview]
Message-ID: <1496753369-5356-1-git-send-email-jonathanh@nvidia.com> (raw)
Commit edd3bdbe9db1 ("dmaengine: tegra-apb: Correct runtime-pm usage")
added pm_runtime_get/put() calls to the tegra-apb DMA system suspend
callbacks. Runtime PM is disabled during system suspend and so these
APIs cannot be used. Fix the suspend handling for the tegra-apb DMA by
moving the save and restore of the DMA register context into the
runtime PM suspend and resume callbacks, and then use the
pm_runtime_force_suspend/resume() APIs to invoke the runtime PM
callbacks during system suspend.
Fixes: edd3bdbe9db1 ("dmaengine: tegra-apb: Correct runtime-pm usage")
Signed-off-by: Jon Hunter <jonathanh-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
---
Changes since V1:
- Drop the custom suspend/resume callbacks and use
pm_runtime_force_suspend/resume directly in SET_SYSTEM_SLEEP_PM_OPS.
drivers/dma/tegra20-apb-dma.c | 50 +++++++++----------------------------------
1 file changed, 10 insertions(+), 40 deletions(-)
diff --git a/drivers/dma/tegra20-apb-dma.c b/drivers/dma/tegra20-apb-dma.c
index 3722b9d8d9fe..b9d75a54c896 100644
--- a/drivers/dma/tegra20-apb-dma.c
+++ b/drivers/dma/tegra20-apb-dma.c
@@ -1494,35 +1494,7 @@ static int tegra_dma_remove(struct platform_device *pdev)
static int tegra_dma_runtime_suspend(struct device *dev)
{
struct tegra_dma *tdma = dev_get_drvdata(dev);
-
- clk_disable_unprepare(tdma->dma_clk);
- return 0;
-}
-
-static int tegra_dma_runtime_resume(struct device *dev)
-{
- struct tegra_dma *tdma = dev_get_drvdata(dev);
- int ret;
-
- ret = clk_prepare_enable(tdma->dma_clk);
- if (ret < 0) {
- dev_err(dev, "clk_enable failed: %d\n", ret);
- return ret;
- }
- return 0;
-}
-
-#ifdef CONFIG_PM_SLEEP
-static int tegra_dma_pm_suspend(struct device *dev)
-{
- struct tegra_dma *tdma = dev_get_drvdata(dev);
int i;
- int ret;
-
- /* Enable clock before accessing register */
- ret = pm_runtime_get_sync(dev);
- if (ret < 0)
- return ret;
tdma->reg_gen = tdma_read(tdma, TEGRA_APBDMA_GENERAL);
for (i = 0; i < tdma->chip_data->nr_channels; i++) {
@@ -1543,21 +1515,21 @@ static int tegra_dma_pm_suspend(struct device *dev)
TEGRA_APBDMA_CHAN_WCOUNT);
}
- /* Disable clock */
- pm_runtime_put(dev);
+ clk_disable_unprepare(tdma->dma_clk);
+
return 0;
}
-static int tegra_dma_pm_resume(struct device *dev)
+static int tegra_dma_runtime_resume(struct device *dev)
{
struct tegra_dma *tdma = dev_get_drvdata(dev);
- int i;
- int ret;
+ int i, ret;
- /* Enable clock before accessing register */
- ret = pm_runtime_get_sync(dev);
- if (ret < 0)
+ ret = clk_prepare_enable(tdma->dma_clk);
+ if (ret < 0) {
+ dev_err(dev, "clk_enable failed: %d\n", ret);
return ret;
+ }
tdma_write(tdma, TEGRA_APBDMA_GENERAL, tdma->reg_gen);
tdma_write(tdma, TEGRA_APBDMA_CONTROL, 0);
@@ -1582,16 +1554,14 @@ static int tegra_dma_pm_resume(struct device *dev)
(ch_reg->csr & ~TEGRA_APBDMA_CSR_ENB));
}
- /* Disable clock */
- pm_runtime_put(dev);
return 0;
}
-#endif
static const struct dev_pm_ops tegra_dma_dev_pm_ops = {
SET_RUNTIME_PM_OPS(tegra_dma_runtime_suspend, tegra_dma_runtime_resume,
NULL)
- SET_SYSTEM_SLEEP_PM_OPS(tegra_dma_pm_suspend, tegra_dma_pm_resume)
+ SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+ pm_runtime_force_resume)
};
static const struct of_device_id tegra_dma_of_match[] = {
--
2.7.4
next reply other threads:[~2017-06-06 12:49 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-06 12:49 Jon Hunter [this message]
[not found] ` <1496753369-5356-1-git-send-email-jonathanh-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2017-06-06 14:48 ` [PATCH V2] dmaengine: tegra-apb: Really fix runtime-pm usage Thierry Reding
2017-06-27 11:44 ` Jon Hunter
[not found] ` <f336e72a-d966-11e4-0885-e324843d5c00-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2017-06-30 5:42 ` Vinod Koul
2017-06-30 5:44 ` Vinod Koul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1496753369-5356-1-git-send-email-jonathanh@nvidia.com \
--to=jonathanh-ddmlm1+adcrqt0dzr+alfa@public.gmane.org \
--cc=dmaengine-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=ldewangan-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org \
--cc=linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=vinod.koul-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox