From: Jon Hunter <jonathanh@nvidia.com>
To: Mathias Nyman <mathias.nyman@intel.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Thierry Reding <thierry.reding@gmail.com>
Cc: linux-usb@vger.kernel.org, linux-tegra@vger.kernel.org,
linux-kernel@vger.kernel.org, Jon Hunter <jonathanh@nvidia.com>
Subject: [PATCH V3 2/3] usb: xhci: tegra: Add runtime PM support
Date: Wed, 16 May 2018 14:48:54 +0100 [thread overview]
Message-ID: <1526478535-23760-2-git-send-email-jonathanh@nvidia.com> (raw)
In-Reply-To: <1526478535-23760-1-git-send-email-jonathanh@nvidia.com>
Add runtime PM support to the Tegra XHCI driver and move the function
calls to enable/disable the clocks, regulators and PHY into the runtime
PM callbacks.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
---
Changes since V2:
- Remove extra unnecessary blank line
- Add Thierry's ACK
Changes since V1:
- None
drivers/usb/host/xhci-tegra.c | 88 ++++++++++++++++++++++++++++++-------------
1 file changed, 62 insertions(+), 26 deletions(-)
diff --git a/drivers/usb/host/xhci-tegra.c b/drivers/usb/host/xhci-tegra.c
index 02b0b24faa58..437e08010587 100644
--- a/drivers/usb/host/xhci-tegra.c
+++ b/drivers/usb/host/xhci-tegra.c
@@ -18,6 +18,7 @@
#include <linux/phy/tegra/xusb.h>
#include <linux/platform_device.h>
#include <linux/pm.h>
+#include <linux/pm_runtime.h>
#include <linux/regulator/consumer.h>
#include <linux/reset.h>
#include <linux/slab.h>
@@ -761,6 +762,49 @@ static void tegra_xusb_phy_disable(struct tegra_xusb *tegra)
}
}
+static int tegra_xusb_runtime_suspend(struct device *dev)
+{
+ struct tegra_xusb *tegra = dev_get_drvdata(dev);
+
+ tegra_xusb_phy_disable(tegra);
+ regulator_bulk_disable(tegra->soc->num_supplies, tegra->supplies);
+ tegra_xusb_clk_disable(tegra);
+
+ return 0;
+}
+
+static int tegra_xusb_runtime_resume(struct device *dev)
+{
+ struct tegra_xusb *tegra = dev_get_drvdata(dev);
+ int err;
+
+ err = tegra_xusb_clk_enable(tegra);
+ if (err) {
+ dev_err(dev, "failed to enable clocks: %d\n", err);
+ return err;
+ }
+
+ err = regulator_bulk_enable(tegra->soc->num_supplies, tegra->supplies);
+ if (err) {
+ dev_err(dev, "failed to enable regulators: %d\n", err);
+ goto disable_clk;
+ }
+
+ err = tegra_xusb_phy_enable(tegra);
+ if (err < 0) {
+ dev_err(dev, "failed to enable PHYs: %d\n", err);
+ goto disable_regulator;
+ }
+
+ return 0;
+
+disable_regulator:
+ regulator_bulk_disable(tegra->soc->num_supplies, tegra->supplies);
+disable_clk:
+ tegra_xusb_clk_disable(tegra);
+ return err;
+}
+
static int tegra_xusb_load_firmware(struct tegra_xusb *tegra)
{
unsigned int code_tag_blocks, code_size_blocks, code_blocks;
@@ -1067,22 +1111,15 @@ static int tegra_xusb_probe(struct platform_device *pdev)
*/
platform_set_drvdata(pdev, tegra);
- err = tegra_xusb_clk_enable(tegra);
- if (err) {
- dev_err(&pdev->dev, "failed to enable clocks: %d\n", err);
- goto put_usb2;
- }
-
- err = regulator_bulk_enable(tegra->soc->num_supplies, tegra->supplies);
- if (err) {
- dev_err(&pdev->dev, "failed to enable regulators: %d\n", err);
- goto disable_clk;
- }
+ pm_runtime_enable(&pdev->dev);
+ if (!pm_runtime_enabled(&pdev->dev))
+ err = pm_runtime_get_sync(&pdev->dev);
+ else
+ err = tegra_xusb_runtime_resume(&pdev->dev);
- err = tegra_xusb_phy_enable(tegra);
if (err < 0) {
- dev_err(&pdev->dev, "failed to enable PHYs: %d\n", err);
- goto disable_regulator;
+ dev_err(&pdev->dev, "failed to enable device: %d\n", err);
+ goto disable_rpm;
}
tegra_xusb_ipfs_config(tegra, regs);
@@ -1090,7 +1127,7 @@ static int tegra_xusb_probe(struct platform_device *pdev)
err = tegra_xusb_load_firmware(tegra);
if (err < 0) {
dev_err(&pdev->dev, "failed to load firmware: %d\n", err);
- goto disable_phy;
+ goto put_rpm;
}
tegra->hcd->regs = tegra->regs;
@@ -1100,7 +1137,7 @@ static int tegra_xusb_probe(struct platform_device *pdev)
err = usb_add_hcd(tegra->hcd, tegra->xhci_irq, IRQF_SHARED);
if (err < 0) {
dev_err(&pdev->dev, "failed to add USB HCD: %d\n", err);
- goto disable_phy;
+ goto put_rpm;
}
device_wakeup_enable(tegra->hcd->self.controller);
@@ -1155,13 +1192,11 @@ static int tegra_xusb_probe(struct platform_device *pdev)
usb_put_hcd(xhci->shared_hcd);
remove_usb2:
usb_remove_hcd(tegra->hcd);
-disable_phy:
- tegra_xusb_phy_disable(tegra);
-disable_regulator:
- regulator_bulk_disable(tegra->soc->num_supplies, tegra->supplies);
-disable_clk:
- tegra_xusb_clk_disable(tegra);
-put_usb2:
+put_rpm:
+ if (!pm_runtime_status_suspended(&pdev->dev))
+ tegra_xusb_runtime_suspend(&pdev->dev);
+disable_rpm:
+ pm_runtime_disable(&pdev->dev);
usb_put_hcd(tegra->hcd);
put_padctl:
tegra_xusb_padctl_put(tegra->padctl);
@@ -1181,9 +1216,8 @@ static int tegra_xusb_remove(struct platform_device *pdev)
dma_free_coherent(&pdev->dev, tegra->fw.size, tegra->fw.virt,
tegra->fw.phys);
- tegra_xusb_phy_disable(tegra);
- regulator_bulk_disable(tegra->soc->num_supplies, tegra->supplies);
- tegra_xusb_clk_disable(tegra);
+ pm_runtime_put_sync(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
tegra_xusb_padctl_put(tegra->padctl);
@@ -1211,6 +1245,8 @@ static int tegra_xusb_resume(struct device *dev)
#endif
static const struct dev_pm_ops tegra_xusb_pm_ops = {
+ SET_RUNTIME_PM_OPS(tegra_xusb_runtime_suspend,
+ tegra_xusb_runtime_resume, NULL)
SET_SYSTEM_SLEEP_PM_OPS(tegra_xusb_suspend, tegra_xusb_resume)
};
--
2.7.4
next prev parent reply other threads:[~2018-05-16 13:48 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-16 13:48 [PATCH V3 1/3] usb: xhci: tegra: Prepare for adding runtime PM support Jon Hunter
2018-05-16 13:48 ` Jon Hunter [this message]
2018-05-16 13:48 ` [PATCH V3 3/3] usb: xhci: tegra: Add support for managing powergates Jon Hunter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1526478535-23760-2-git-send-email-jonathanh@nvidia.com \
--to=jonathanh@nvidia.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=mathias.nyman@intel.com \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).