public inbox for linux-tegra@vger.kernel.org
 help / color / mirror / Atom feed
From: Sameer Pujar <spujar@nvidia.com>
To: perex@perex.cz, tiwai@suse.com, pierre-louis.bossart@linux.intel.com
Cc: thierry.reding@gmail.com, jonathanh@nvidia.com,
	rlokhande@nvidia.com, alsa-devel@alsa-project.org,
	linux-tegra@vger.kernel.org, linux-kernel@vger.kernel.org,
	Sameer Pujar <spujar@nvidia.com>
Subject: [PATCH] ALSA: hda/tegra: enable clock during probe
Date: Thu, 24 Jan 2019 23:06:43 +0530	[thread overview]
Message-ID: <1548351403-1875-1-git-send-email-spujar@nvidia.com> (raw)

If CONFIG_PM is disabled or runtime PM calls are forbidden, the clocks
will not be ON. This could cause issue during probe, where hda init
setup is done. This patch checks whether runtime PM is enabled or not.
If disabled, clocks are enabled in probe() and disabled in remove()

This patch does following minor changes as cleanup,
  * return code check for pm_runtime_get_sync() to take care of failure
    and exit gracefully.
  * In remove path runtime PM is disabled before calling snd_card_free().
  * hda_tegra_disable_clocks() is moved out of CONFIG_PM_SLEEP check.
  * runtime PM callbacks moved out of CONFIG_PM check

Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Ravindra Lokhande <rlokhande@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
---
 sound/pci/hda/hda_tegra.c | 31 ++++++++++++++++++++++---------
 1 file changed, 22 insertions(+), 9 deletions(-)

diff --git a/sound/pci/hda/hda_tegra.c b/sound/pci/hda/hda_tegra.c
index c8d18dc..155c2f5 100644
--- a/sound/pci/hda/hda_tegra.c
+++ b/sound/pci/hda/hda_tegra.c
@@ -219,7 +219,6 @@ static int hda_tegra_enable_clocks(struct hda_tegra *data)
 	return rc;
 }
 
-#ifdef CONFIG_PM_SLEEP
 static void hda_tegra_disable_clocks(struct hda_tegra *data)
 {
 	clk_disable_unprepare(data->hda2hdmi_clk);
@@ -227,6 +226,7 @@ static void hda_tegra_disable_clocks(struct hda_tegra *data)
 	clk_disable_unprepare(data->hda_clk);
 }
 
+#ifdef CONFIG_PM_SLEEP
 /*
  * power management
  */
@@ -257,7 +257,6 @@ static int hda_tegra_resume(struct device *dev)
 }
 #endif /* CONFIG_PM_SLEEP */
 
-#ifdef CONFIG_PM
 static int hda_tegra_runtime_suspend(struct device *dev)
 {
 	struct snd_card *card = dev_get_drvdata(dev);
@@ -283,7 +282,7 @@ static int hda_tegra_runtime_resume(struct device *dev)
 	int rc;
 
 	rc = hda_tegra_enable_clocks(hda);
-	if (rc != 0)
+	if (rc)
 		return rc;
 	if (chip && chip->running) {
 		hda_tegra_init(hda);
@@ -292,7 +291,6 @@ static int hda_tegra_runtime_resume(struct device *dev)
 
 	return 0;
 }
-#endif /* CONFIG_PM */
 
 static const struct dev_pm_ops hda_tegra_pm = {
 	SET_SYSTEM_SLEEP_PM_OPS(hda_tegra_suspend, hda_tegra_resume)
@@ -555,6 +553,13 @@ static int hda_tegra_probe(struct platform_device *pdev)
 	if (!azx_has_pm_runtime(chip))
 		pm_runtime_forbid(hda->dev);
 
+	/* explicit resume if runtime PM is disabled */
+	if (!pm_runtime_enabled(hda->dev)) {
+		err = hda_tegra_runtime_resume(hda->dev);
+		if (err)
+			goto out_free;
+	}
+
 	schedule_work(&hda->probe_work);
 
 	return 0;
@@ -571,7 +576,14 @@ static void hda_tegra_probe_work(struct work_struct *work)
 	struct platform_device *pdev = to_platform_device(hda->dev);
 	int err;
 
-	pm_runtime_get_sync(hda->dev);
+	err = pm_runtime_get_sync(hda->dev);
+	if (err < 0) {
+		dev_err(hda->dev,
+			"failed in pm_runtime_get_syc with err = %d\n",
+			err);
+		return;
+	}
+
 	err = hda_tegra_first_init(chip, pdev);
 	if (err < 0)
 		goto out_free;
@@ -599,12 +611,13 @@ static void hda_tegra_probe_work(struct work_struct *work)
 
 static int hda_tegra_remove(struct platform_device *pdev)
 {
-	int ret;
-
-	ret = snd_card_free(dev_get_drvdata(&pdev->dev));
 	pm_runtime_disable(&pdev->dev);
+	if (!pm_runtime_status_suspended(&pdev->dev)) {
+		hda_tegra_runtime_suspend(&pdev->dev);
+		pm_runtime_set_suspended(&pdev->dev);
+	}
 
-	return ret;
+	return snd_card_free(dev_get_drvdata(&pdev->dev));
 }
 
 static void hda_tegra_shutdown(struct platform_device *pdev)
-- 
2.7.4

             reply	other threads:[~2019-01-24 17:36 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-24 17:36 Sameer Pujar [this message]
2019-01-24 19:08 ` [PATCH] ALSA: hda/tegra: enable clock during probe Takashi Iwai
2019-01-25  7:08   ` Sameer Pujar
2019-01-25 11:36   ` Jon Hunter
2019-01-25 12:40     ` Takashi Iwai
2019-01-25 13:26       ` Jon Hunter
2019-01-25 13:58         ` Takashi Iwai
2019-01-25 14:04           ` Jon Hunter
2019-01-28  6:06             ` Sameer Pujar
2019-01-30  9:35               ` Jon Hunter
2019-01-30 10:39                 ` Takashi Iwai
2019-01-30 10:56                   ` Sameer Pujar
2019-01-30 12:24                     ` Jon Hunter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1548351403-1875-1-git-send-email-spujar@nvidia.com \
    --to=spujar@nvidia.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=jonathanh@nvidia.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=perex@perex.cz \
    --cc=pierre-louis.bossart@linux.intel.com \
    --cc=rlokhande@nvidia.com \
    --cc=thierry.reding@gmail.com \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox