public inbox for linux-tegra@vger.kernel.org
 help / color / mirror / Atom feed
From: Sameer Pujar <spujar@nvidia.com>
To: vkoul@kernel.org, dan.j.williams@intel.com, tglx@linutronix.de,
	jason@lakedaemon.net, marc.zyngier@arm.com
Cc: thierry.reding@gmail.com, jonathanh@nvidia.com,
	ldewangan@nvidia.com, mkumard@nvidia.com,
	linux-tegra@vger.kernel.org, linux-kernel@vger.kernel.org,
	dmaengine@vger.kernel.org, Sameer Pujar <spujar@nvidia.com>
Subject: [PATCH 2/3] dmaengine: tegra210-adma: use devm_clk_*() helpers
Date: Wed, 6 Mar 2019 16:11:17 +0530	[thread overview]
Message-ID: <1551868878-1131-2-git-send-email-spujar@nvidia.com> (raw)
In-Reply-To: <1551868878-1131-1-git-send-email-spujar@nvidia.com>

Usage of pm_clk_*() results in non-zero prepare_count for clocks and hence
module clocks remain ON always. This is not desired as it will leak power
unncessarily. This patch replaces pm_clk_*() with devm_clk_*() interface.
This helps to keep refcounts balanced when device is not in use and runtime
PM callbacks help to enable or disable clocks. System suspend/resume calls
can use pm_runtime_force_suspend/resume.

Suggested-by: Mohan Kumar D <mkumard@nvidia.com>
Reviewed-by: Jonathan Hunter <jonathanh@nvidia.com>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
---
 drivers/dma/tegra210-adma.c | 37 ++++++++++++++-----------------------
 1 file changed, 14 insertions(+), 23 deletions(-)

diff --git a/drivers/dma/tegra210-adma.c b/drivers/dma/tegra210-adma.c
index b26256f..123fc6d 100644
--- a/drivers/dma/tegra210-adma.c
+++ b/drivers/dma/tegra210-adma.c
@@ -22,7 +22,6 @@
 #include <linux/of_device.h>
 #include <linux/of_dma.h>
 #include <linux/of_irq.h>
-#include <linux/pm_clock.h>
 #include <linux/pm_runtime.h>
 #include <linux/slab.h>
 
@@ -141,6 +140,7 @@ struct tegra_adma {
 	struct dma_device		dma_dev;
 	struct device			*dev;
 	void __iomem			*base_addr;
+	struct clk			*ahub_clk;
 	unsigned int			nr_channels;
 	unsigned long			rx_requests_reserved;
 	unsigned long			tx_requests_reserved;
@@ -637,8 +637,9 @@ static int tegra_adma_runtime_suspend(struct device *dev)
 	struct tegra_adma *tdma = dev_get_drvdata(dev);
 
 	tdma->global_cmd = tdma_read(tdma, ADMA_GLOBAL_CMD);
+	clk_disable_unprepare(tdma->ahub_clk);
 
-	return pm_clk_suspend(dev);
+	return 0;
 }
 
 static int tegra_adma_runtime_resume(struct device *dev)
@@ -646,10 +647,11 @@ static int tegra_adma_runtime_resume(struct device *dev)
 	struct tegra_adma *tdma = dev_get_drvdata(dev);
 	int ret;
 
-	ret = pm_clk_resume(dev);
-	if (ret)
+	ret = clk_prepare_enable(tdma->ahub_clk);
+	if (ret) {
+		dev_err(dev, "ahub clk_enable failed: %d\n", ret);
 		return ret;
-
+	}
 	tdma_write(tdma, ADMA_GLOBAL_CMD, tdma->global_cmd);
 
 	return 0;
@@ -692,13 +694,11 @@ static int tegra_adma_probe(struct platform_device *pdev)
 	if (IS_ERR(tdma->base_addr))
 		return PTR_ERR(tdma->base_addr);
 
-	ret = pm_clk_create(&pdev->dev);
-	if (ret)
-		return ret;
-
-	ret = of_pm_clk_add_clk(&pdev->dev, "d_audio");
-	if (ret)
-		goto clk_destroy;
+	tdma->ahub_clk = devm_clk_get(&pdev->dev, "d_audio");
+	if (IS_ERR(tdma->ahub_clk)) {
+		dev_err(&pdev->dev, "Error: Missing ahub controller clock\n");
+		return PTR_ERR(tdma->ahub_clk);
+	}
 
 	pm_runtime_enable(&pdev->dev);
 
@@ -775,8 +775,6 @@ static int tegra_adma_probe(struct platform_device *pdev)
 	pm_runtime_put_sync(&pdev->dev);
 rpm_disable:
 	pm_runtime_disable(&pdev->dev);
-clk_destroy:
-	pm_clk_destroy(&pdev->dev);
 
 	return ret;
 }
@@ -793,22 +791,15 @@ static int tegra_adma_remove(struct platform_device *pdev)
 
 	pm_runtime_put_sync(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
-	pm_clk_destroy(&pdev->dev);
 
 	return 0;
 }
 
-#ifdef CONFIG_PM_SLEEP
-static int tegra_adma_pm_suspend(struct device *dev)
-{
-	return pm_runtime_suspended(dev) == false;
-}
-#endif
-
 static const struct dev_pm_ops tegra_adma_dev_pm_ops = {
 	SET_RUNTIME_PM_OPS(tegra_adma_runtime_suspend,
 			   tegra_adma_runtime_resume, NULL)
-	SET_SYSTEM_SLEEP_PM_OPS(tegra_adma_pm_suspend, NULL)
+	SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+				pm_runtime_force_resume)
 };
 
 static struct platform_driver tegra_admac_driver = {
-- 
2.7.4

  reply	other threads:[~2019-03-06 10:41 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-03-06 10:41 [PATCH 1/3] bus: tegra-aconnect: use devm_clk_*() helpers Sameer Pujar
2019-03-06 10:41 ` Sameer Pujar [this message]
2019-03-06 10:41 ` [PATCH 3/3] irqchip/gic-pm: " Sameer Pujar
2019-03-06 11:31   ` Marc Zyngier
2019-03-06 12:00     ` Jon Hunter
2019-03-06 13:21       ` Marc Zyngier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1551868878-1131-2-git-send-email-spujar@nvidia.com \
    --to=spujar@nvidia.com \
    --cc=dan.j.williams@intel.com \
    --cc=dmaengine@vger.kernel.org \
    --cc=jason@lakedaemon.net \
    --cc=jonathanh@nvidia.com \
    --cc=ldewangan@nvidia.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=marc.zyngier@arm.com \
    --cc=mkumard@nvidia.com \
    --cc=tglx@linutronix.de \
    --cc=thierry.reding@gmail.com \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox