From: Sameer Pujar <spujar@nvidia.com>
To: <broonie@kernel.org>, <lgirdwood@gmail.com>,
<kuninori.morimoto.gx@renesas.com>,
<pierre-louis.bossart@linux.intel.com>, <perex@perex.cz>,
<tiwai@suse.com>
Cc: <thierry.reding@gmail.com>, <jonathanh@nvidia.com>,
<alsa-devel@alsa-project.org>, <linux-tegra@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <sharadg@nvidia.com>,
Sameer Pujar <spujar@nvidia.com>
Subject: [PATCH v5 6/7] ASoC: audio-graph: Expose new members for asoc_simple_priv
Date: Mon, 2 Nov 2020 20:40:13 +0530 [thread overview]
Message-ID: <1604329814-24779-7-git-send-email-spujar@nvidia.com> (raw)
In-Reply-To: <1604329814-24779-1-git-send-email-spujar@nvidia.com>
Add new members in struct 'asoc_simple_priv'. Idea is to leverage
simple or graph card driver as much as possible and vendor can
maintain a thin driver to control the behavior by populating these
newly exposed members.
Following are the members added in 'asoc_simple_priv':
- 'ops' struct: In some cases SoC vendor drivers may want to
implement 'snd_soc_ops' callbacks differently. In such cases
custom callbacks would be used.
- 'force_dpcm' flag: Right now simple or graph card drivers
detect DAI links as DPCM links if:
* The dpcm_selectable is set AND
* Codec is connected to multiple CPU endpoints or aconvert
property is used for rate/channels.
So there is no way to directly specify usage of DPCM alone. So a
flag is exposed to mark all links as DPCM. Vendor driver can
set this if required.
- 'dpcm_selectable': Currently simple or audio graph drivers
provide a way to enable this for specific compatibles. However
vendor driver may want to define some additional info. Thus
expose this variable where vendor drivers can set this if
required.
Audio graph driver is updated to consider above flags or callbacks.
Subsequent patches in the series illustrate usage for above.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
include/sound/simple_card_utils.h | 3 +++
sound/soc/generic/audio-graph-card.c | 41 ++++++++++++++++++++++++++++--------
2 files changed, 35 insertions(+), 9 deletions(-)
diff --git a/include/sound/simple_card_utils.h b/include/sound/simple_card_utils.h
index 86a1e95..ba4a3e1 100644
--- a/include/sound/simple_card_utils.h
+++ b/include/sound/simple_card_utils.h
@@ -56,6 +56,9 @@ struct asoc_simple_priv {
struct asoc_simple_dai *dais;
struct snd_soc_codec_conf *codec_conf;
struct gpio_desc *pa_gpio;
+ const struct snd_soc_ops *ops;
+ unsigned int dpcm_selectable:1;
+ unsigned int force_dpcm:1;
};
#define simple_priv_to_card(priv) (&(priv)->snd_card)
#define simple_priv_to_props(priv, i) ((priv)->dai_props + (i))
diff --git a/sound/soc/generic/audio-graph-card.c b/sound/soc/generic/audio-graph-card.c
index 0ba50be9..4db9c0e 100644
--- a/sound/soc/generic/audio-graph-card.c
+++ b/sound/soc/generic/audio-graph-card.c
@@ -355,6 +355,11 @@ static int graph_dai_link_of_dpcm(struct asoc_simple_priv *priv,
snd_soc_dai_link_set_capabilities(dai_link);
dai_link->ops = &graph_ops;
+
+ /* Use custom snd_soc_ops callbacks if available */
+ if (priv->ops)
+ dai_link->ops = priv->ops;
+
dai_link->init = asoc_simple_dai_init;
out_put_node:
@@ -439,6 +444,28 @@ static int graph_dai_link_of(struct asoc_simple_priv *priv,
return 0;
}
+static inline bool parse_as_dpcm_link(struct asoc_simple_priv *priv,
+ struct device_node *codec_port,
+ struct asoc_simple_data *adata)
+{
+ if (priv->force_dpcm)
+ return true;
+
+ if (!priv->dpcm_selectable)
+ return false;
+
+ /*
+ * It is DPCM
+ * if Codec port has many endpoints,
+ * or has convert-xxx property
+ */
+ if ((of_get_child_count(codec_port) > 1) ||
+ (adata->convert_rate || adata->convert_channels))
+ return true;
+
+ return false;
+}
+
static int graph_for_each_link(struct asoc_simple_priv *priv,
struct link_info *li,
int (*func_noml)(struct asoc_simple_priv *priv,
@@ -459,7 +486,6 @@ static int graph_for_each_link(struct asoc_simple_priv *priv,
struct device_node *codec_port;
struct device_node *codec_port_old = NULL;
struct asoc_simple_data adata;
- uintptr_t dpcm_selectable = (uintptr_t)of_device_get_match_data(dev);
int rc, ret;
/* loop for all listed CPU port */
@@ -482,14 +508,8 @@ static int graph_for_each_link(struct asoc_simple_priv *priv,
graph_parse_convert(dev, codec_ep, &adata);
graph_parse_convert(dev, cpu_ep, &adata);
- /*
- * It is DPCM
- * if Codec port has many endpoints,
- * or has convert-xxx property
- */
- if (dpcm_selectable &&
- ((of_get_child_count(codec_port) > 1) ||
- adata.convert_rate || adata.convert_channels))
+ /* check if link requires DPCM parsing */
+ if (parse_as_dpcm_link(priv, codec_port, &adata))
ret = func_dpcm(priv, cpu_ep, codec_ep, li,
(codec_port_old == codec_port));
/* else normal sound */
@@ -678,6 +698,9 @@ static int graph_probe(struct platform_device *pdev)
card->num_dapm_widgets = ARRAY_SIZE(graph_dapm_widgets);
card->probe = graph_card_probe;
+ if (of_device_get_match_data(dev))
+ priv->dpcm_selectable = 1;
+
memset(&li, 0, sizeof(li));
graph_get_dais_count(priv, &li);
if (!li.link || !li.dais)
--
2.7.4
next prev parent reply other threads:[~2020-11-02 15:11 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-02 15:10 [PATCH v5 0/7] Audio Graph Updates Sameer Pujar
2020-11-02 15:10 ` [PATCH v5 1/7] ASoC: soc-core: Fix component name_prefix parsing Sameer Pujar
2020-11-02 15:10 ` [PATCH v5 2/7] ASoC: soc-pcm: Get all BEs along DAPM path Sameer Pujar
2020-11-02 15:10 ` [PATCH v5 3/7] ASoC: audio-graph: Use of_node and DAI for DPCM DAI link names Sameer Pujar
2020-11-02 15:10 ` [PATCH v5 4/7] ASoC: audio-graph: Identify 'no_pcm' DAI links for DPCM Sameer Pujar
2020-11-02 15:10 ` [PATCH v5 5/7] ASoC: audio-graph: Support empty Codec endpoint Sameer Pujar
2020-11-02 15:10 ` Sameer Pujar [this message]
2020-11-02 15:10 ` [PATCH v5 7/7] ASoC: audio-graph: Expose helpers from audio graph Sameer Pujar
2020-11-09 20:30 ` [PATCH v5 0/7] Audio Graph Updates Mark Brown
2020-11-09 23:19 ` Kuninori Morimoto
2020-11-10 21:38 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1604329814-24779-7-git-send-email-spujar@nvidia.com \
--to=spujar@nvidia.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=jonathanh@nvidia.com \
--cc=kuninori.morimoto.gx@renesas.com \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=perex@perex.cz \
--cc=pierre-louis.bossart@linux.intel.com \
--cc=sharadg@nvidia.com \
--cc=thierry.reding@gmail.com \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox