From: Vasily Khoruzhick <anarsoul-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Cc: Marc Dietrich <marvin24-Mmb7MZpHnFY@public.gmane.org>,
Collin Cross <ccross-z5hGa2qSFaRBDgjK7y7TUQ@public.gmane.org>,
Olof Johansson <olof-nZhT3qVonbNeoWH0uzbU5w@public.gmane.org>,
linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH 2/3] ARM: tegra: paz00: export the WIFI rfkill gpio
Date: Fri, 15 Jul 2011 15:17:02 +0300 [thread overview]
Message-ID: <201107151517.03176.anarsoul@gmail.com> (raw)
In-Reply-To: <1310725464-2524-3-git-send-email-marvin24-Mmb7MZpHnFY@public.gmane.org>
On Friday 15 July 2011 13:24:22 Marc Dietrich wrote:
> This makes the WIFI rfkill gpio available to userspace. On boot,
> WIFI will be unblocked by default.
Take a look on rfkill-gpio driver.
Regards
Vasily
> Signed-off-by: Marc Dietrich <marvin24-Mmb7MZpHnFY@public.gmane.org>
> ---
> arch/arm/mach-tegra/board-paz00-pinmux.c | 1 +
> arch/arm/mach-tegra/board-paz00.c | 16 ++++++++++++++++
> arch/arm/mach-tegra/board-paz00.h | 6 ++++++
> 3 files changed, 23 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-tegra/board-paz00-pinmux.c
> b/arch/arm/mach-tegra/board-paz00-pinmux.c index bdd2627..c02a48f 100644
> --- a/arch/arm/mach-tegra/board-paz00-pinmux.c
> +++ b/arch/arm/mach-tegra/board-paz00-pinmux.c
> @@ -145,6 +145,7 @@ static struct tegra_gpio_table gpio_table[] = {
> { .gpio = TEGRA_GPIO_SD1_WP, .enable = true },
> { .gpio = TEGRA_GPIO_SD1_POWER, .enable = true },
> { .gpio = TEGRA_ULPI_RST, .enable = true },
> + { .gpio = TEGRA_WIFI_PWRN, .enable = true },
> };
>
> void paz00_pinmux_init(void)
> diff --git a/arch/arm/mach-tegra/board-paz00.c
> b/arch/arm/mach-tegra/board-paz00.c index 931b06e..0bc652b 100644
> --- a/arch/arm/mach-tegra/board-paz00.c
> +++ b/arch/arm/mach-tegra/board-paz00.c
> @@ -25,6 +25,7 @@
> #include <linux/dma-mapping.h>
> #include <linux/pda_power.h>
> #include <linux/io.h>
> +#include <linux/gpio.h>
> #include <linux/i2c.h>
> #include <linux/i2c-tegra.h>
> #include <linux/platform_data/tegra_usb.h>
> @@ -165,6 +166,20 @@ static struct tegra_sdhci_platform_data sdhci_pdata4 =
> { .is_8bit = 1,
> };
>
> +static void __init paz00_wifi_init(void)
> +{
> + int ret;
> +
> + /* unlock hw rfkill */
> + ret = gpio_request_one(TEGRA_WIFI_PWRN, GPIOF_OUT_INIT_HIGH,
> + "wifi pwrn");
> + if (ret) {
> + pr_warning("WIFI: could not requestrfkill gpio\n");
> + return;
> + }
> + gpio_export(TEGRA_WIFI_PWRN, 0);
> +};
> +
> static void __init tegra_paz00_init(void)
> {
> tegra_clk_init_from_table(paz00_clk_init_table);
> @@ -178,6 +193,7 @@ static void __init tegra_paz00_init(void)
>
> paz00_i2c_init();
> paz00_usb_init();
> + paz00_wifi_init();
> }
>
> MACHINE_START(PAZ00, "Toshiba AC100 / Dynabook AZ")
> diff --git a/arch/arm/mach-tegra/board-paz00.h
> b/arch/arm/mach-tegra/board-paz00.h index d4ff39d..5d2849e 100644
> --- a/arch/arm/mach-tegra/board-paz00.h
> +++ b/arch/arm/mach-tegra/board-paz00.h
> @@ -17,11 +17,17 @@
> #ifndef _MACH_TEGRA_BOARD_PAZ00_H
> #define _MACH_TEGRA_BOARD_PAZ00_H
>
> +/* SDCARD */
> #define TEGRA_GPIO_SD1_CD TEGRA_GPIO_PV5
> #define TEGRA_GPIO_SD1_WP TEGRA_GPIO_PH1
> #define TEGRA_GPIO_SD1_POWER TEGRA_GPIO_PT3
> +
> +/* ULPI */
> #define TEGRA_ULPI_RST TEGRA_GPIO_PV0
>
> +/* WIFI */
> +#define TEGRA_WIFI_PWRN TEGRA_GPIO_PK5
> +
> void paz00_pinmux_init(void);
>
> #endif
next prev parent reply other threads:[~2011-07-15 12:17 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-07-15 10:24 [PATCH 0/3] ARM: tegra: paz00: Add Wifi and second serial port support Marc Dietrich
[not found] ` <1310725464-2524-1-git-send-email-marvin24-Mmb7MZpHnFY@public.gmane.org>
2011-07-15 10:24 ` [PATCH 1/3] ARM: tegra: paz00: add support serial port on JP1 Marc Dietrich
[not found] ` <1310725464-2524-2-git-send-email-marvin24-Mmb7MZpHnFY@public.gmane.org>
2011-07-15 16:39 ` Stephen Warren
[not found] ` <74CDBE0F657A3D45AFBB94109FB122FF049E834C23-C7FfzLzN0UxDw2glCA4ptUEOCMrvLtNR@public.gmane.org>
2011-07-16 15:59 ` Marc Dietrich
2011-07-15 10:24 ` [PATCH 2/3] ARM: tegra: paz00: export the WIFI rfkill gpio Marc Dietrich
[not found] ` <1310725464-2524-3-git-send-email-marvin24-Mmb7MZpHnFY@public.gmane.org>
2011-07-15 12:17 ` Vasily Khoruzhick [this message]
[not found] ` <201107151517.03176.anarsoul-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2011-07-22 20:38 ` Marc Dietrich
2011-07-15 16:53 ` Stephen Warren
[not found] ` <74CDBE0F657A3D45AFBB94109FB122FF049E834C2F-C7FfzLzN0UxDw2glCA4ptUEOCMrvLtNR@public.gmane.org>
2011-07-15 17:25 ` Sergei Shtylyov
[not found] ` <4E2077EC.1070902-hkdhdckH98+B+jHODAdFcQ@public.gmane.org>
2011-07-15 17:30 ` Stephen Warren
2011-07-15 10:24 ` [PATCH 3/3] ARM: tegra: paz00: enable wifi led Marc Dietrich
[not found] ` <1310725464-2524-4-git-send-email-marvin24-Mmb7MZpHnFY@public.gmane.org>
2011-07-15 17:10 ` Stephen Warren
[not found] ` <74CDBE0F657A3D45AFBB94109FB122FF049E834C43-C7FfzLzN0UxDw2glCA4ptUEOCMrvLtNR@public.gmane.org>
2011-07-16 16:19 ` Marc Dietrich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201107151517.03176.anarsoul@gmail.com \
--to=anarsoul-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
--cc=ccross-z5hGa2qSFaRBDgjK7y7TUQ@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=marvin24-Mmb7MZpHnFY@public.gmane.org \
--cc=olof-nZhT3qVonbNeoWH0uzbU5w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox