Re: [PATCH V1] TPS62360: Add tps62360 regulator driver

[Mark Brown <broonie@opensource.wolfsonmicro.com>]

On Mon, Jan 09, 2012 at 02:17:17PM +0530, Laxman Dewangan wrote:
> > On Monday, January 09, 2012 1:09 PM, Mark Brown wrote

> > The driver can decide what voltages to set - like I said in a previous
> > mail it could use something like LRU to decide which slot to use, or
> > perhaps be clever with the upper end of the range it was given.

> So we will change the gpios output also according to voltage register
> slot from driver?

You'd need to change both from the driver.

> So through platform data, I will pass the gpio nr for VSEL0, VSEL1 and
> their default state. 

Yes.

> If valid gpios will be passed then driver will use the LRU mechanism
> for getting desired configuration register for configuring the desired
> voltage (passed through the regulator_setvoltage())and set the gpios
> accordingly through gpio libs.
> In this approach, because we need to set two different gpios for
> desired logic, the output will not go in proper transition from
> current to new one, for some time when we completed setting of
> one gpio and setting second gpio.

Isn't that an issue anyway?