Re: [PATCH v2 3/5] ARM: dt: tegra: add ADT7461 temperature sensor to paz00 device tree

[Olof Johansson <olof-nZhT3qVonbNeoWH0uzbU5w@public.gmane.org>]

On Tue, Jan 31, 2012 at 07:53:21PM +0100, Marc Dietrich wrote:
> Add the ADT7461 temperature monitoring IC which is connected via
> the DVC controller.
> 
> Signed-off-by: Marc Dietrich <marvin24-Mmb7MZpHnFY@public.gmane.org>
> ---
>  arch/arm/boot/dts/tegra-paz00.dts |    5 +++++
>  1 files changed, 5 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/tegra-paz00.dts b/arch/arm/boot/dts/tegra-
> paz00.dts
> index f667343..81e1d30 100644
> --- a/arch/arm/boot/dts/tegra-paz00.dts
> +++ b/arch/arm/boot/dts/tegra-paz00.dts
> @@ -35,6 +35,11 @@
>  
>         i2c@7000d000 {
>                 clock-frequency = <400000>;
> +
> +               adt7461@4c {
> +                       compatible = "adi,adt7461";
> +                       reg = <0x4c>;
> +               };

It's common to name the device node temp-sensor (or temperature-sensor) instead
of the model of the actual chip. The name isn't significant for the binding,
but it's a practice that's been used on other platforms for a long time.

I'll just fix it up when applying, if ok with you. No need to respin just for
this.


-Olof