[PATCH V1] regulator: tps65910: Configure correct value for VDDCTRL vout reg

[PATCH V1] regulator: tps65910: Configure correct value for VDDCTRL vout reg

[Laxman Dewangan]

As per datasheet, the voltage output is defined as
from SEL[6:0] = 3 to 64 (dec)
Vout= (SEL[6:0] × 12.5 mV + 562.5 mV)

The list_voltage returns the vout as
    600mV +  selector * 12.5mV

and so equivalent VSEL is selector + 3.
Adding 3 on selector when configuring VSEL register for
VDDCTRL output.

Signed-off-by: Laxman Dewangan <ldewangan-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
---
 drivers/regulator/tps65910-regulator.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/regulator/tps65910-regulator.c b/drivers/regulator/tps65910-regulator.c
index 15b5f1e..8de2835 100644
--- a/drivers/regulator/tps65910-regulator.c
+++ b/drivers/regulator/tps65910-regulator.c
@@ -715,7 +715,7 @@ static int tps65910_set_voltage_dcdc(struct regulator_dev *dev,
 		tps65910_reg_write(pmic, TPS65910_VDD2_OP, vsel);
 		break;
 	case TPS65911_REG_VDDCTRL:
-		vsel = selector;
+		vsel = selector + 3;
 		tps65910_reg_write(pmic, TPS65911_VDDCTRL_OP, vsel);
 	}
 
-- 
1.7.1.1

Re: [PATCH V1] regulator: tps65910: Configure correct value for VDDCTRL vout reg

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 214 bytes --]

On Wed, Mar 07, 2012 at 04:39:05PM +0530, Laxman Dewangan wrote:
> As per datasheet, the voltage output is defined as
> from SEL[6:0] = 3 to 64 (dec)
> Vout= (SEL[6:0] × 12.5 mV + 562.5 mV)

Applied, thanks.

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]