[PATCH 1/3] regulator: palmas: clear sleep bits if not selected

[PATCH 1/3] regulator: palmas: clear sleep bits if not selected

[Laxman Dewangan]

Clear the sleep/warm reset bits when it is not selected through
regulator platform data. This will make sure that configuration
is inline with the platform data regardless of boot/POR
configuration.

Signed-off-by: Laxman Dewangan <ldewangan-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
---
 drivers/regulator/palmas-regulator.c |   18 ++++++++++++------
 1 files changed, 12 insertions(+), 6 deletions(-)

diff --git a/drivers/regulator/palmas-regulator.c b/drivers/regulator/palmas-regulator.c
index 7c54e31..7c7992b 100644
--- a/drivers/regulator/palmas-regulator.c
+++ b/drivers/regulator/palmas-regulator.c
@@ -444,24 +444,26 @@ static int palmas_smps_init(struct palmas *palmas, int id,
 
 	switch (id) {
 	case PALMAS_REG_SMPS10:
-		if (reg_init->mode_sleep) {
-			reg &= ~PALMAS_SMPS10_CTRL_MODE_SLEEP_MASK;
+		reg &= ~PALMAS_SMPS10_CTRL_MODE_SLEEP_MASK;
+		if (reg_init->mode_sleep)
 			reg |= reg_init->mode_sleep <<
 					PALMAS_SMPS10_CTRL_MODE_SLEEP_SHIFT;
-		}
 		break;
 	default:
 		if (reg_init->warm_reset)
 			reg |= PALMAS_SMPS12_CTRL_WR_S;
+		else
+			reg &= ~PALMAS_SMPS12_CTRL_WR_S;
 
 		if (reg_init->roof_floor)
 			reg |= PALMAS_SMPS12_CTRL_ROOF_FLOOR_EN;
+		else
+			reg &= ~PALMAS_SMPS12_CTRL_ROOF_FLOOR_EN;
 
-		if (reg_init->mode_sleep) {
-			reg &= ~PALMAS_SMPS12_CTRL_MODE_SLEEP_MASK;
+		reg &= ~PALMAS_SMPS12_CTRL_MODE_SLEEP_MASK;
+		if (reg_init->mode_sleep)
 			reg |= reg_init->mode_sleep <<
 					PALMAS_SMPS12_CTRL_MODE_SLEEP_SHIFT;
-		}
 	}
 
 	ret = palmas_smps_write(palmas, addr, reg);
@@ -507,9 +509,13 @@ static int palmas_ldo_init(struct palmas *palmas, int id,
 
 	if (reg_init->warm_reset)
 		reg |= PALMAS_LDO1_CTRL_WR_S;
+	else
+		reg &= ~PALMAS_LDO1_CTRL_WR_S;
 
 	if (reg_init->mode_sleep)
 		reg |= PALMAS_LDO1_CTRL_MODE_SLEEP;
+	else
+		reg &= ~PALMAS_LDO1_CTRL_MODE_SLEEP;
 
 	ret = palmas_ldo_write(palmas, addr, reg);
 	if (ret)
-- 
1.7.1.1

[PATCH 2/3] regulator: palmas: support for external regulator through control outputs

[Laxman Dewangan]

Palmas device have control outputs like REGEN1, REGEN2, REGEN3,
SYSEN1 and SYSEN2. These control outputs can be used for controlling
external voltage switches to enabled/disable voltage outputs.

Add support of these control outputs through regulator framework.

Signed-off-by: Laxman Dewangan <ldewangan-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
---
 drivers/regulator/palmas-regulator.c |   95 +++++++++++++++++++++++++++++----
 include/linux/mfd/palmas.h           |    6 ++
 2 files changed, 89 insertions(+), 12 deletions(-)

diff --git a/drivers/regulator/palmas-regulator.c b/drivers/regulator/palmas-regulator.c
index 7c7992b..28080a7 100644
--- a/drivers/regulator/palmas-regulator.c
+++ b/drivers/regulator/palmas-regulator.c
@@ -166,6 +166,26 @@ static const struct regs_info palmas_regs_info[] = {
 		.vsel_addr	= PALMAS_LDOUSB_VOLTAGE,
 		.ctrl_addr	= PALMAS_LDOUSB_CTRL,
 	},
+	{
+		.name		= "REGEN1",
+		.ctrl_addr	= PALMAS_REGEN1_CTRL,
+	},
+	{
+		.name		= "REGEN2",
+		.ctrl_addr	= PALMAS_REGEN2_CTRL,
+	},
+	{
+		.name		= "REGEN3",
+		.ctrl_addr	= PALMAS_REGEN3_CTRL,
+	},
+	{
+		.name		= "SYSEN1",
+		.ctrl_addr	= PALMAS_SYSEN1_CTRL,
+	},
+	{
+		.name		= "SYSEN2",
+		.ctrl_addr	= PALMAS_SYSEN2_CTRL,
+	},
 };
 
 #define SMPS_CTRL_MODE_OFF		0x00
@@ -423,6 +443,12 @@ static struct regulator_ops palmas_ops_ldo = {
 	.map_voltage		= regulator_map_voltage_linear,
 };
 
+static struct regulator_ops palmas_ops_extreg = {
+	.is_enabled		= regulator_is_enabled_regmap,
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+};
+
 /*
  * setup the hardware based sleep configuration of the SMPS/LDO regulators
  * from the platform data. This is different to the software based control
@@ -524,6 +550,28 @@ static int palmas_ldo_init(struct palmas *palmas, int id,
 	return 0;
 }
 
+static int palmas_extreg_init(struct palmas *palmas, int id,
+		struct palmas_reg_init *reg_init)
+{
+	unsigned int addr;
+	int ret;
+	unsigned int val = 0;
+
+	addr = palmas_regs_info[id].ctrl_addr;
+
+	if (reg_init->mode_sleep)
+		val = PALMAS_REGEN1_CTRL_MODE_SLEEP;
+
+	ret = palmas_update_bits(palmas, PALMAS_RESOURCE_BASE,
+			addr, PALMAS_REGEN1_CTRL_MODE_SLEEP, val);
+	if (ret < 0) {
+		dev_err(palmas->dev, "Resource reg 0x%02x update failed %d\n",
+			addr, ret);
+		return ret;
+	}
+	return 0;
+}
+
 static struct of_regulator_match palmas_matches[] = {
 	{ .name = "smps12", },
 	{ .name = "smps123", },
@@ -546,6 +594,11 @@ static struct of_regulator_match palmas_matches[] = {
 	{ .name = "ldo9", },
 	{ .name = "ldoln", },
 	{ .name = "ldousb", },
+	{ .name = "regen1", },
+	{ .name = "regen2", },
+	{ .name = "regen3", },
+	{ .name = "sysen1", },
+	{ .name = "sysen2", },
 };
 
 static void palmas_dt_to_pdata(struct device *dev,
@@ -764,21 +817,34 @@ static int palmas_regulators_probe(struct platform_device *pdev)
 		/* Register the regulators */
 		pmic->desc[id].name = palmas_regs_info[id].name;
 		pmic->desc[id].id = id;
-		pmic->desc[id].n_voltages = PALMAS_LDO_NUM_VOLTAGES;
-
-		pmic->desc[id].ops = &palmas_ops_ldo;
-
 		pmic->desc[id].type = REGULATOR_VOLTAGE;
 		pmic->desc[id].owner = THIS_MODULE;
-		pmic->desc[id].min_uV = 900000;
-		pmic->desc[id].uV_step = 50000;
-		pmic->desc[id].linear_min_sel = 1;
-		pmic->desc[id].vsel_reg = PALMAS_BASE_TO_REG(PALMAS_LDO_BASE,
+
+		if (id < PALMAS_REG_REGEN1) {
+			pmic->desc[id].n_voltages = PALMAS_LDO_NUM_VOLTAGES;
+			pmic->desc[id].ops = &palmas_ops_ldo;
+			pmic->desc[id].min_uV = 900000;
+			pmic->desc[id].uV_step = 50000;
+			pmic->desc[id].linear_min_sel = 1;
+			pmic->desc[id].vsel_reg =
+					PALMAS_BASE_TO_REG(PALMAS_LDO_BASE,
 						palmas_regs_info[id].vsel_addr);
-		pmic->desc[id].vsel_mask = PALMAS_LDO1_VOLTAGE_VSEL_MASK;
-		pmic->desc[id].enable_reg = PALMAS_BASE_TO_REG(PALMAS_LDO_BASE,
+			pmic->desc[id].vsel_mask =
+					PALMAS_LDO1_VOLTAGE_VSEL_MASK;
+			pmic->desc[id].enable_reg =
+					PALMAS_BASE_TO_REG(PALMAS_LDO_BASE,
+						palmas_regs_info[id].ctrl_addr);
+			pmic->desc[id].enable_mask =
+					PALMAS_LDO1_CTRL_MODE_ACTIVE;
+		} else {
+			pmic->desc[id].n_voltages = 1;
+			pmic->desc[id].ops = &palmas_ops_extreg;
+			pmic->desc[id].enable_reg =
+					PALMAS_BASE_TO_REG(PALMAS_RESOURCE_BASE,
 						palmas_regs_info[id].ctrl_addr);
-		pmic->desc[id].enable_mask = PALMAS_LDO1_CTRL_MODE_ACTIVE;
+			pmic->desc[id].enable_mask =
+					PALMAS_REGEN1_CTRL_MODE_ACTIVE;
+		}
 
 		if (pdata)
 			config.init_data = pdata->reg_data[id];
@@ -804,7 +870,12 @@ static int palmas_regulators_probe(struct platform_device *pdev)
 		if (pdata) {
 			reg_init = pdata->reg_init[id];
 			if (reg_init) {
-				ret = palmas_ldo_init(palmas, id, reg_init);
+				if (id < PALMAS_REG_REGEN1)
+					ret = palmas_ldo_init(palmas,
+							id, reg_init);
+				else
+					ret = palmas_extreg_init(palmas,
+							id, reg_init);
 				if (ret) {
 					regulator_unregister(pmic->rdev[id]);
 					goto err_unregister_regulator;
diff --git a/include/linux/mfd/palmas.h b/include/linux/mfd/palmas.h
index 4a066d0..fb04d07 100644
--- a/include/linux/mfd/palmas.h
+++ b/include/linux/mfd/palmas.h
@@ -164,6 +164,12 @@ enum palmas_regulators {
 	PALMAS_REG_LDO9,
 	PALMAS_REG_LDOLN,
 	PALMAS_REG_LDOUSB,
+	/* External regulators */
+	PALMAS_REG_REGEN1,
+	PALMAS_REG_REGEN2,
+	PALMAS_REG_REGEN3,
+	PALMAS_REG_SYSEN1,
+	PALMAS_REG_SYSEN2,
 	/* Total number of regulators */
 	PALMAS_NUM_REGS,
 };
-- 
1.7.1.1

Re: [PATCH 2/3] regulator: palmas: support for external regulator through control outputs

[Graeme Gregory]

This looks good to me with one proviso!

SYSEN1/2 are not necessarily for regulators as given by the name, they
are more for use indicating to other chips that power is now
available/stable.

But it will not break things to have them exposed in regulator API so I
shall leave this to Mark.

Graeme

On 17/04/13 10:43, Laxman Dewangan wrote:
> Palmas device have control outputs like REGEN1, REGEN2, REGEN3,
> SYSEN1 and SYSEN2. These control outputs can be used for controlling
> external voltage switches to enabled/disable voltage outputs.
>
> Add support of these control outputs through regulator framework.
>
> Signed-off-by: Laxman Dewangan <ldewangan-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
> ---
>  drivers/regulator/palmas-regulator.c |   95 +++++++++++++++++++++++++++++----
>  include/linux/mfd/palmas.h           |    6 ++
>  2 files changed, 89 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/regulator/palmas-regulator.c b/drivers/regulator/palmas-regulator.c
> index 7c7992b..28080a7 100644
> --- a/drivers/regulator/palmas-regulator.c
> +++ b/drivers/regulator/palmas-regulator.c
> @@ -166,6 +166,26 @@ static const struct regs_info palmas_regs_info[] = {
>  		.vsel_addr	= PALMAS_LDOUSB_VOLTAGE,
>  		.ctrl_addr	= PALMAS_LDOUSB_CTRL,
>  	},
> +	{
> +		.name		= "REGEN1",
> +		.ctrl_addr	= PALMAS_REGEN1_CTRL,
> +	},
> +	{
> +		.name		= "REGEN2",
> +		.ctrl_addr	= PALMAS_REGEN2_CTRL,
> +	},
> +	{
> +		.name		= "REGEN3",
> +		.ctrl_addr	= PALMAS_REGEN3_CTRL,
> +	},
> +	{
> +		.name		= "SYSEN1",
> +		.ctrl_addr	= PALMAS_SYSEN1_CTRL,
> +	},
> +	{
> +		.name		= "SYSEN2",
> +		.ctrl_addr	= PALMAS_SYSEN2_CTRL,
> +	},
>  };
>  
>  #define SMPS_CTRL_MODE_OFF		0x00
> @@ -423,6 +443,12 @@ static struct regulator_ops palmas_ops_ldo = {
>  	.map_voltage		= regulator_map_voltage_linear,
>  };
>  
> +static struct regulator_ops palmas_ops_extreg = {
> +	.is_enabled		= regulator_is_enabled_regmap,
> +	.enable			= regulator_enable_regmap,
> +	.disable		= regulator_disable_regmap,
> +};
> +
>  /*
>   * setup the hardware based sleep configuration of the SMPS/LDO regulators
>   * from the platform data. This is different to the software based control
> @@ -524,6 +550,28 @@ static int palmas_ldo_init(struct palmas *palmas, int id,
>  	return 0;
>  }
>  
> +static int palmas_extreg_init(struct palmas *palmas, int id,
> +		struct palmas_reg_init *reg_init)
> +{
> +	unsigned int addr;
> +	int ret;
> +	unsigned int val = 0;
> +
> +	addr = palmas_regs_info[id].ctrl_addr;
> +
> +	if (reg_init->mode_sleep)
> +		val = PALMAS_REGEN1_CTRL_MODE_SLEEP;
> +
> +	ret = palmas_update_bits(palmas, PALMAS_RESOURCE_BASE,
> +			addr, PALMAS_REGEN1_CTRL_MODE_SLEEP, val);
> +	if (ret < 0) {
> +		dev_err(palmas->dev, "Resource reg 0x%02x update failed %d\n",
> +			addr, ret);
> +		return ret;
> +	}
> +	return 0;
> +}
> +
>  static struct of_regulator_match palmas_matches[] = {
>  	{ .name = "smps12", },
>  	{ .name = "smps123", },
> @@ -546,6 +594,11 @@ static struct of_regulator_match palmas_matches[] = {
>  	{ .name = "ldo9", },
>  	{ .name = "ldoln", },
>  	{ .name = "ldousb", },
> +	{ .name = "regen1", },
> +	{ .name = "regen2", },
> +	{ .name = "regen3", },
> +	{ .name = "sysen1", },
> +	{ .name = "sysen2", },
>  };
>  
>  static void palmas_dt_to_pdata(struct device *dev,
> @@ -764,21 +817,34 @@ static int palmas_regulators_probe(struct platform_device *pdev)
>  		/* Register the regulators */
>  		pmic->desc[id].name = palmas_regs_info[id].name;
>  		pmic->desc[id].id = id;
> -		pmic->desc[id].n_voltages = PALMAS_LDO_NUM_VOLTAGES;
> -
> -		pmic->desc[id].ops = &palmas_ops_ldo;
> -
>  		pmic->desc[id].type = REGULATOR_VOLTAGE;
>  		pmic->desc[id].owner = THIS_MODULE;
> -		pmic->desc[id].min_uV = 900000;
> -		pmic->desc[id].uV_step = 50000;
> -		pmic->desc[id].linear_min_sel = 1;
> -		pmic->desc[id].vsel_reg = PALMAS_BASE_TO_REG(PALMAS_LDO_BASE,
> +
> +		if (id < PALMAS_REG_REGEN1) {
> +			pmic->desc[id].n_voltages = PALMAS_LDO_NUM_VOLTAGES;
> +			pmic->desc[id].ops = &palmas_ops_ldo;
> +			pmic->desc[id].min_uV = 900000;
> +			pmic->desc[id].uV_step = 50000;
> +			pmic->desc[id].linear_min_sel = 1;
> +			pmic->desc[id].vsel_reg =
> +					PALMAS_BASE_TO_REG(PALMAS_LDO_BASE,
>  						palmas_regs_info[id].vsel_addr);
> -		pmic->desc[id].vsel_mask = PALMAS_LDO1_VOLTAGE_VSEL_MASK;
> -		pmic->desc[id].enable_reg = PALMAS_BASE_TO_REG(PALMAS_LDO_BASE,
> +			pmic->desc[id].vsel_mask =
> +					PALMAS_LDO1_VOLTAGE_VSEL_MASK;
> +			pmic->desc[id].enable_reg =
> +					PALMAS_BASE_TO_REG(PALMAS_LDO_BASE,
> +						palmas_regs_info[id].ctrl_addr);
> +			pmic->desc[id].enable_mask =
> +					PALMAS_LDO1_CTRL_MODE_ACTIVE;
> +		} else {
> +			pmic->desc[id].n_voltages = 1;
> +			pmic->desc[id].ops = &palmas_ops_extreg;
> +			pmic->desc[id].enable_reg =
> +					PALMAS_BASE_TO_REG(PALMAS_RESOURCE_BASE,
>  						palmas_regs_info[id].ctrl_addr);
> -		pmic->desc[id].enable_mask = PALMAS_LDO1_CTRL_MODE_ACTIVE;
> +			pmic->desc[id].enable_mask =
> +					PALMAS_REGEN1_CTRL_MODE_ACTIVE;
> +		}
>  
>  		if (pdata)
>  			config.init_data = pdata->reg_data[id];
> @@ -804,7 +870,12 @@ static int palmas_regulators_probe(struct platform_device *pdev)
>  		if (pdata) {
>  			reg_init = pdata->reg_init[id];
>  			if (reg_init) {
> -				ret = palmas_ldo_init(palmas, id, reg_init);
> +				if (id < PALMAS_REG_REGEN1)
> +					ret = palmas_ldo_init(palmas,
> +							id, reg_init);
> +				else
> +					ret = palmas_extreg_init(palmas,
> +							id, reg_init);
>  				if (ret) {
>  					regulator_unregister(pmic->rdev[id]);
>  					goto err_unregister_regulator;
> diff --git a/include/linux/mfd/palmas.h b/include/linux/mfd/palmas.h
> index 4a066d0..fb04d07 100644
> --- a/include/linux/mfd/palmas.h
> +++ b/include/linux/mfd/palmas.h
> @@ -164,6 +164,12 @@ enum palmas_regulators {
>  	PALMAS_REG_LDO9,
>  	PALMAS_REG_LDOLN,
>  	PALMAS_REG_LDOUSB,
> +	/* External regulators */
> +	PALMAS_REG_REGEN1,
> +	PALMAS_REG_REGEN2,
> +	PALMAS_REG_REGEN3,
> +	PALMAS_REG_SYSEN1,
> +	PALMAS_REG_SYSEN2,
>  	/* Total number of regulators */
>  	PALMAS_NUM_REGS,
>  };

Re: [PATCH 2/3] regulator: palmas: support for external regulator through control outputs

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 521 bytes --]

On Wed, Apr 17, 2013 at 02:51:34PM +0100, Graeme Gregory wrote:
> This looks good to me with one proviso!

> SYSEN1/2 are not necessarily for regulators as given by the name, they
> are more for use indicating to other chips that power is now
> available/stable.

> But it will not break things to have them exposed in regulator API so I
> shall leave this to Mark.

It's probably reasonable given that things like this normally end up
being part of the power sequencing or used for external regulators.
Applied, thanks.

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

Re: [PATCH 1/3] regulator: palmas: clear sleep bits if not selected

[Graeme Gregory]

This is good with me, I originally had it like this and I cannot
remember why I convinced myself not to do it this way.

Acked-by: Graeme Gregory <gg-kDsPt+C1G03kYMGBc/C6ZA@public.gmane.org>

On 17/04/13 10:43, Laxman Dewangan wrote:
> Clear the sleep/warm reset bits when it is not selected through
> regulator platform data. This will make sure that configuration
> is inline with the platform data regardless of boot/POR
> configuration.
>
> Signed-off-by: Laxman Dewangan <ldewangan-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
> ---
>  drivers/regulator/palmas-regulator.c |   18 ++++++++++++------
>  1 files changed, 12 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/regulator/palmas-regulator.c b/drivers/regulator/palmas-regulator.c
> index 7c54e31..7c7992b 100644
> --- a/drivers/regulator/palmas-regulator.c
> +++ b/drivers/regulator/palmas-regulator.c
> @@ -444,24 +444,26 @@ static int palmas_smps_init(struct palmas *palmas, int id,
>  
>  	switch (id) {
>  	case PALMAS_REG_SMPS10:
> -		if (reg_init->mode_sleep) {
> -			reg &= ~PALMAS_SMPS10_CTRL_MODE_SLEEP_MASK;
> +		reg &= ~PALMAS_SMPS10_CTRL_MODE_SLEEP_MASK;
> +		if (reg_init->mode_sleep)
>  			reg |= reg_init->mode_sleep <<
>  					PALMAS_SMPS10_CTRL_MODE_SLEEP_SHIFT;
> -		}
>  		break;
>  	default:
>  		if (reg_init->warm_reset)
>  			reg |= PALMAS_SMPS12_CTRL_WR_S;
> +		else
> +			reg &= ~PALMAS_SMPS12_CTRL_WR_S;
>  
>  		if (reg_init->roof_floor)
>  			reg |= PALMAS_SMPS12_CTRL_ROOF_FLOOR_EN;
> +		else
> +			reg &= ~PALMAS_SMPS12_CTRL_ROOF_FLOOR_EN;
>  
> -		if (reg_init->mode_sleep) {
> -			reg &= ~PALMAS_SMPS12_CTRL_MODE_SLEEP_MASK;
> +		reg &= ~PALMAS_SMPS12_CTRL_MODE_SLEEP_MASK;
> +		if (reg_init->mode_sleep)
>  			reg |= reg_init->mode_sleep <<
>  					PALMAS_SMPS12_CTRL_MODE_SLEEP_SHIFT;
> -		}
>  	}
>  
>  	ret = palmas_smps_write(palmas, addr, reg);
> @@ -507,9 +509,13 @@ static int palmas_ldo_init(struct palmas *palmas, int id,
>  
>  	if (reg_init->warm_reset)
>  		reg |= PALMAS_LDO1_CTRL_WR_S;
> +	else
> +		reg &= ~PALMAS_LDO1_CTRL_WR_S;
>  
>  	if (reg_init->mode_sleep)
>  		reg |= PALMAS_LDO1_CTRL_MODE_SLEEP;
> +	else
> +		reg &= ~PALMAS_LDO1_CTRL_MODE_SLEEP;
>  
>  	ret = palmas_ldo_write(palmas, addr, reg);
>  	if (ret)

Re: [PATCH 1/3] regulator: palmas: clear sleep bits if not selected

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 290 bytes --]

On Wed, Apr 17, 2013 at 03:13:11PM +0530, Laxman Dewangan wrote:
> Clear the sleep/warm reset bits when it is not selected through
> regulator platform data. This will make sure that configuration
> is inline with the platform data regardless of boot/POR
> configuration.

Applied, thanks.

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

[PATCH 3/3] regulator: palmas: add support for LDO8 tracking mode

[Laxman Dewangan]

LDO8 of Palma device like tps65913 support the tracking mode
on which LDO8 track the SMPS45 voltage when SMPS45 is ON
and use the LDO8.VOLTAGE_SEL register when SMPS45 is OFF.

On track mode, the steps of voltage change for LDO8 is 25mV
where in non-tracking mode it is 50mV. Set the steps accordingly.
Number of voltage count is still same for both the cases.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
---
 drivers/regulator/palmas-regulator.c |   53 ++++++++++++++++++++++++++++++++++
 include/linux/mfd/palmas.h           |    3 ++
 2 files changed, 56 insertions(+), 0 deletions(-)

diff --git a/drivers/regulator/palmas-regulator.c b/drivers/regulator/palmas-regulator.c
index 28080a7..d6efaf1 100644
--- a/drivers/regulator/palmas-regulator.c
+++ b/drivers/regulator/palmas-regulator.c
@@ -572,6 +572,46 @@ static int palmas_extreg_init(struct palmas *palmas, int id,
 	return 0;
 }
 
+static void palmas_enable_ldo8_track(struct palmas *palmas)
+{
+	unsigned int reg;
+	unsigned int addr;
+	int ret;
+
+	addr = palmas_regs_info[PALMAS_REG_LDO8].ctrl_addr;
+
+	ret = palmas_ldo_read(palmas, addr, &reg);
+	if (ret) {
+		dev_err(palmas->dev, "Error in reading ldo8 control reg\n");
+		return;
+	}
+
+	reg |= PALMAS_LDO8_CTRL_LDO_TRACKING_EN;
+	ret = palmas_ldo_write(palmas, addr, reg);
+	if (ret < 0) {
+		dev_err(palmas->dev, "Error in enabling tracking mode\n");
+		return;
+	}
+	/*
+	 * When SMPS45 is set to off and LDO8 tracking is enabled, the LDO8
+	 * output is defined by the LDO8_VOLTAGE.VSEL register divided by two,
+	 * and can be set from 0.45 to 1.65 V.
+	 */
+	addr = palmas_regs_info[PALMAS_REG_LDO8].vsel_addr;
+	ret = palmas_ldo_read(palmas, addr, &reg);
+	if (ret) {
+		dev_err(palmas->dev, "Error in reading ldo8 voltage reg\n");
+		return;
+	}
+
+	reg = (reg << 1) & PALMAS_LDO8_VOLTAGE_VSEL_MASK;
+	ret = palmas_ldo_write(palmas, addr, reg);
+	if (ret < 0)
+		dev_err(palmas->dev, "Error in setting ldo8 voltage reg\n");
+
+	return;
+}
+
 static struct of_regulator_match palmas_matches[] = {
 	{ .name = "smps12", },
 	{ .name = "smps123", },
@@ -657,6 +697,11 @@ static void palmas_dt_to_pdata(struct device *dev,
 		if (ret)
 			pdata->reg_init[idx]->vsel =
 				PALMAS_SMPS12_VOLTAGE_RANGE;
+
+		if (idx == PALMAS_REG_LDO8)
+			pdata->enable_ldo8_tracking = of_property_read_bool(
+						palmas_matches[idx].of_node,
+						"ti,enable-ldo8-tracking");
 	}
 
 	pdata->ldo6_vibrator = of_property_read_bool(node, "ti,ldo6-vibrator");
@@ -836,6 +881,13 @@ static int palmas_regulators_probe(struct platform_device *pdev)
 						palmas_regs_info[id].ctrl_addr);
 			pmic->desc[id].enable_mask =
 					PALMAS_LDO1_CTRL_MODE_ACTIVE;
+
+			/* Check if LDO8 is in tracking mode or not */
+			if (pdata && (id == PALMAS_REG_LDO8) &&
+					pdata->enable_ldo8_tracking) {
+				palmas_enable_ldo8_track(palmas);
+				pmic->desc[id].uV_step = 25000;
+			}
 		} else {
 			pmic->desc[id].n_voltages = 1;
 			pmic->desc[id].ops = &palmas_ops_extreg;
@@ -884,6 +936,7 @@ static int palmas_regulators_probe(struct platform_device *pdev)
 		}
 	}
 
+
 	return 0;
 
 err_unregister_regulator:
diff --git a/include/linux/mfd/palmas.h b/include/linux/mfd/palmas.h
index fb04d07..12d8a62 100644
--- a/include/linux/mfd/palmas.h
+++ b/include/linux/mfd/palmas.h
@@ -187,6 +187,9 @@ struct palmas_pmic_platform_data {
 
 	/* use LDO6 for vibrator control */
 	int ldo6_vibrator;
+
+	/* Enable tracking mode of LDO8 */
+	bool enable_ldo8_tracking;
 };
 
 struct palmas_usb_platform_data {
-- 
1.7.1.1

Re: [PATCH 3/3] regulator: palmas: add support for LDO8 tracking mode

[Graeme Gregory]

Looks good to me, I don't actually know the use case for this feature!

Acked-by: Graeme Gregory <gg-kDsPt+C1G03kYMGBc/C6ZA@public.gmane.org>

On 17/04/13 10:43, Laxman Dewangan wrote:
> LDO8 of Palma device like tps65913 support the tracking mode
> on which LDO8 track the SMPS45 voltage when SMPS45 is ON
> and use the LDO8.VOLTAGE_SEL register when SMPS45 is OFF.
>
> On track mode, the steps of voltage change for LDO8 is 25mV
> where in non-tracking mode it is 50mV. Set the steps accordingly.
> Number of voltage count is still same for both the cases.
>
> Signed-off-by: Laxman Dewangan <ldewangan-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
> ---
>  drivers/regulator/palmas-regulator.c |   53 ++++++++++++++++++++++++++++++++++
>  include/linux/mfd/palmas.h           |    3 ++
>  2 files changed, 56 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/regulator/palmas-regulator.c b/drivers/regulator/palmas-regulator.c
> index 28080a7..d6efaf1 100644
> --- a/drivers/regulator/palmas-regulator.c
> +++ b/drivers/regulator/palmas-regulator.c
> @@ -572,6 +572,46 @@ static int palmas_extreg_init(struct palmas *palmas, int id,
>  	return 0;
>  }
>  
> +static void palmas_enable_ldo8_track(struct palmas *palmas)
> +{
> +	unsigned int reg;
> +	unsigned int addr;
> +	int ret;
> +
> +	addr = palmas_regs_info[PALMAS_REG_LDO8].ctrl_addr;
> +
> +	ret = palmas_ldo_read(palmas, addr, &reg);
> +	if (ret) {
> +		dev_err(palmas->dev, "Error in reading ldo8 control reg\n");
> +		return;
> +	}
> +
> +	reg |= PALMAS_LDO8_CTRL_LDO_TRACKING_EN;
> +	ret = palmas_ldo_write(palmas, addr, reg);
> +	if (ret < 0) {
> +		dev_err(palmas->dev, "Error in enabling tracking mode\n");
> +		return;
> +	}
> +	/*
> +	 * When SMPS45 is set to off and LDO8 tracking is enabled, the LDO8
> +	 * output is defined by the LDO8_VOLTAGE.VSEL register divided by two,
> +	 * and can be set from 0.45 to 1.65 V.
> +	 */
> +	addr = palmas_regs_info[PALMAS_REG_LDO8].vsel_addr;
> +	ret = palmas_ldo_read(palmas, addr, &reg);
> +	if (ret) {
> +		dev_err(palmas->dev, "Error in reading ldo8 voltage reg\n");
> +		return;
> +	}
> +
> +	reg = (reg << 1) & PALMAS_LDO8_VOLTAGE_VSEL_MASK;
> +	ret = palmas_ldo_write(palmas, addr, reg);
> +	if (ret < 0)
> +		dev_err(palmas->dev, "Error in setting ldo8 voltage reg\n");
> +
> +	return;
> +}
> +
>  static struct of_regulator_match palmas_matches[] = {
>  	{ .name = "smps12", },
>  	{ .name = "smps123", },
> @@ -657,6 +697,11 @@ static void palmas_dt_to_pdata(struct device *dev,
>  		if (ret)
>  			pdata->reg_init[idx]->vsel =
>  				PALMAS_SMPS12_VOLTAGE_RANGE;
> +
> +		if (idx == PALMAS_REG_LDO8)
> +			pdata->enable_ldo8_tracking = of_property_read_bool(
> +						palmas_matches[idx].of_node,
> +						"ti,enable-ldo8-tracking");
>  	}
>  
>  	pdata->ldo6_vibrator = of_property_read_bool(node, "ti,ldo6-vibrator");
> @@ -836,6 +881,13 @@ static int palmas_regulators_probe(struct platform_device *pdev)
>  						palmas_regs_info[id].ctrl_addr);
>  			pmic->desc[id].enable_mask =
>  					PALMAS_LDO1_CTRL_MODE_ACTIVE;
> +
> +			/* Check if LDO8 is in tracking mode or not */
> +			if (pdata && (id == PALMAS_REG_LDO8) &&
> +					pdata->enable_ldo8_tracking) {
> +				palmas_enable_ldo8_track(palmas);
> +				pmic->desc[id].uV_step = 25000;
> +			}
>  		} else {
>  			pmic->desc[id].n_voltages = 1;
>  			pmic->desc[id].ops = &palmas_ops_extreg;
> @@ -884,6 +936,7 @@ static int palmas_regulators_probe(struct platform_device *pdev)
>  		}
>  	}
>  
> +
>  	return 0;
>  
>  err_unregister_regulator:
> diff --git a/include/linux/mfd/palmas.h b/include/linux/mfd/palmas.h
> index fb04d07..12d8a62 100644
> --- a/include/linux/mfd/palmas.h
> +++ b/include/linux/mfd/palmas.h
> @@ -187,6 +187,9 @@ struct palmas_pmic_platform_data {
>  
>  	/* use LDO6 for vibrator control */
>  	int ldo6_vibrator;
> +
> +	/* Enable tracking mode of LDO8 */
> +	bool enable_ldo8_tracking;
>  };
>  
>  struct palmas_usb_platform_data {

Re: [PATCH 3/3] regulator: palmas: add support for LDO8 tracking mode

[Laxman Dewangan]

On Wednesday 17 April 2013 07:24 PM, Graeme Gregory wrote:
> Looks good to me, I don't actually know the use case for this feature!
>
> Acked-by: Graeme Gregory <gg-kDsPt+C1G03kYMGBc/C6ZA@public.gmane.org>
>

This is require for Tegra.
The always ON section of Tegra (say vdd_ao) need to be same as the core 
voltage(vdd_core) when system is active/idle. Hence the vdd_ao should be 
track to vdd_core and for this we need to configure the rail in tracking 
mode.

Re: [PATCH 3/3] regulator: palmas: add support for LDO8 tracking mode

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 265 bytes --]

On Wed, Apr 17, 2013 at 03:13:13PM +0530, Laxman Dewangan wrote:
> LDO8 of Palma device like tps65913 support the tracking mode
> on which LDO8 track the SMPS45 voltage when SMPS45 is ON
> and use the LDO8.VOLTAGE_SEL register when SMPS45 is OFF.

Applied, thanks.

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]