Re: [PATCH 1/2] memory: tegra20-mc: Fix hang in IRQ handler.

[Thierry Reding <thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>]

[-- Attachment #1: Type: text/plain, Size: 1001 bytes --]

On Mon, Jun 10, 2013 at 12:13:43PM +0300, Tuomas Tynkkynen wrote:
> In Tegra20 memory controller any MC interrupt would cause an
> infinite loop in the IRQ handler.
> 
> Signed-off-by: Tuomas Tynkkynen <ttynkkynen-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
> ---
>  drivers/memory/tegra20-mc.c | 5 ++++-
>  1 file changed, 4 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/memory/tegra20-mc.c b/drivers/memory/tegra20-mc.c
> index 2ca5f28..bd5a553 100644
> --- a/drivers/memory/tegra20-mc.c
> +++ b/drivers/memory/tegra20-mc.c
> @@ -193,8 +193,11 @@ static irqreturn_t tegra20_mc_isr(int irq, void *data)
>  	mask &= stat;
>  	if (!mask)
>  		return IRQ_NONE;
> -	while ((bit = ffs(mask)) != 0)
> +	while ((bit = ffs(mask)) != 0) {
>  		tegra20_mc_decode(mc, bit - 1);
> +		mask &= BIT(bit);

Shouldn't this be "mask &= ~BIT(bit);"? The intent of the code is to
clear the bit which was handled by the loop body, right? The above
clears all other bits instead.

Thierry

[-- Attachment #2: Type: application/pgp-signature, Size: 836 bytes --]