From: Jean Delvare <khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org>
To: Wei Ni <wni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
Cc: linux-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org,
lm-sensors-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH v4 0/3] Lm90 Enhancements
Date: Mon, 9 Sep 2013 09:42:45 +0200 [thread overview]
Message-ID: <20130909094245.4661d9cb@endymion.delvare> (raw)
In-Reply-To: <522D67B2.4030406-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
Hi Wei,
I am sorry, I see there have been many discussions about the lm90
driver while I was on vacation and these are threads I did not have the
time to catch up with yet. I'll read it all as soon as possible by my
current schedule is tight so please be patient!
Jean
On Mon, 9 Sep 2013 14:16:18 +0800, Wei Ni wrote:
> Hi, Jean
> Do you have any more suggestions on this series?
>
> Thanks.
> Wei.
>
> On 08/07/2013 02:18 PM, Wei Ni wrote:
> > This patch set enhance the lm90 driver,
> > it make the driver more readable and easier to use thermal framework.
> >
> > This series is v4, previous version patches:
> > [RFC]: http://thread.gmane.org/gmane.linux.power-management.general/31056
> > [v1]: http://thread.gmane.org/gmane.linux.ports.tegra/11710/
> > [v2]: http://www.mail-archive.com/linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org/msg465555.html
> > [v3]: http://www.mail-archive.com/linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org/msg466772.html
> >
> > Changes from v3:
> > 1. remove the patch "hwmon: (lm90) split set&show temp as common codes",
> > and sent it as a separated one.
> > 2. fix the bug of second read on STATUS register.
> > 3. fix some code style issue according to Jean's comments.
> >
> > Changes from v2:
> > 1. update the defines for status bit, and go into a separate patch.
> > 2. introduce the new lm90_is_tripped() for lm90_irq_thread and lm90_alert.
> >
> > Changes from v1:
> > 1. change the string "irq" to "IRQ"
> > 2. add macro defines for the alarm status
> > 3. consider the shared IRQ.
> >
> > Changes from RFC:
> > 1. change _show_temp() to read_temp(), _set_temp() to write_temp().
> > 2. simply return value for the read_temp(), not use pointer.
> > 3. use devm_request_threaded_irq() to request irq and set flag IRQF_ONESHOT.
> >
> > Wei Ni (3):
> > hwmon: (lm90) Define status bits
> > hwmon: (lm90) add support to handle IRQ
> > hwmon: (lm90) use enums for the indexes of temp8 and temp11
> >
> > drivers/hwmon/lm90.c | 252 ++++++++++++++++++++++++++++++++------------------
> > 1 file changed, 163 insertions(+), 89 deletions(-)
prev parent reply other threads:[~2013-09-09 7:42 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-07 6:18 [PATCH v4 0/3] Lm90 Enhancements Wei Ni
2013-08-07 6:18 ` [PATCH v4 1/3] hwmon: (lm90) Define status bits Wei Ni
[not found] ` <1375856306-14415-2-git-send-email-wni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2013-10-30 15:41 ` Jean Delvare
2013-10-30 17:03 ` Guenter Roeck
2013-10-31 2:47 ` Wei Ni
[not found] ` <5271C4C4.2040308-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2013-10-31 3:09 ` Wei Ni
2013-08-07 6:18 ` [PATCH v4 3/3] hwmon: (lm90) use enums for the indexes of temp8 and temp11 Wei Ni
[not found] ` <1375856306-14415-4-git-send-email-wni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2013-10-30 16:21 ` Jean Delvare
[not found] ` <1375856306-14415-1-git-send-email-wni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2013-08-07 6:18 ` [PATCH v4 2/3] hwmon: (lm90) add support to handle IRQ Wei Ni
[not found] ` <1375856306-14415-3-git-send-email-wni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2013-10-30 15:53 ` Jean Delvare
2013-11-04 9:34 ` Jean Delvare
[not found] ` <20131104103434.5a085e27-R0o5gVi9kd7kN2dkZ6Wm7A@public.gmane.org>
2013-11-04 10:05 ` Wei Ni
2013-09-09 6:16 ` [PATCH v4 0/3] Lm90 Enhancements Wei Ni
[not found] ` <522D67B2.4030406-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2013-09-09 7:42 ` Jean Delvare [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130909094245.4661d9cb@endymion.delvare \
--to=khali-puyad+kwke1g9huczpvpmw@public.gmane.org \
--cc=linux-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=lm-sensors-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org \
--cc=wni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox