From mboxrd@z Thu Jan 1 00:00:00 1970 From: Olof Johansson Subject: Re: [PATCH] ARM: tegra: apalis/colibri t30: fix on-module 5v0 supplies Date: Sun, 24 Aug 2014 11:21:51 -0700 Message-ID: <20140824182151.GA11563@localhost> References: <1408735510-2654-1-git-send-email-swarren@wwwdotorg.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <1408735510-2654-1-git-send-email-swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org> Sender: linux-tegra-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Stephen Warren Cc: arm-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Marcel Ziswiler , stable-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Stephen Warren List-Id: linux-tegra@vger.kernel.org On Fri, Aug 22, 2014 at 01:25:10PM -0600, Stephen Warren wrote: > From: Marcel Ziswiler > > Working on Gigabit/PCIe support in U-Boot for Apalis T30 I realised > that the current device tree source includes for our modules only > happen to work due to referencing the on-carrier 5v0 supply from USB > which is not at all available on-module. The modules actually contain > TPS60150 charge pumps to generate the PMIC required 5 volts from the > one and only 3.3 volt module supply. This patch fixes this. > > (Note: When back-porting this to v3.16 stable releases, simply drop the > change to tegra30-apalis.dtsi; that file was added in v3.17) > > Cc: #v3.16+ > Signed-off-by: Marcel Ziswiler > Signed-off-by: Stephen Warren Applied, thanks. -Olof