Re: [PATCH 0/4] clk: tegra: add support for the Tegra132 CAR IP block

[Thierry Reding <thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>]

[-- Attachment #1: Type: text/plain, Size: 1237 bytes --]

On Tue, Dec 16, 2014 at 12:38:24PM -0800, Paul Walmsley wrote:
> This series follows up on Peter De Schrijver's posting of a Tegra132
> CAR series in July of this year.  It adds common clock framework
> support for the Tegra132 CAR IP block.
> 
> The patches are based on next-20141209 and have been compiled and
> boot-tested on a Tegra30 Beaver board, a Tegra114 Dalmore board, and a
> Tegra124 Jetson TK1.  They've also been tested on a Tegra132 Norrin
> FFD board, with some other patches applied since support for that
> board isn't completely upstream (but is coming shortly).
> 
> Intended for v3.20.
> 
> - Paul
> 
> ---
> 
> Paul Walmsley (2):
>       clk: tegra:  split Tegra124 clock header file
>       clk: tegra: Add support for the Tegra132 CAR IP block
> 
> Peter De Schrijver (2):
>       clk: tegra: make tegra_clocks_apply_init_table() arch_initcall
>       clk: tegra: Update binding doc for Tegra132

Peter, you've collected clock patches in a separate branch in the past
and sent off pull requests to Mike. Are you going to pick up these
patches, too?

With the comments on patch 4/4 addressed, the series:

Acked-by: Thierry Reding <treding-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>

[-- Attachment #2: Type: application/pgp-signature, Size: 819 bytes --]