Re: [PATCH v3 1/2] usb: host: ehci-tegra: Grab the correct UTMI pads reset

[Greg Kroah-Hartman <gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org>]

On Wed, May 04, 2016 at 04:39:59PM +0200, Thierry Reding wrote:
> From: Thierry Reding <treding-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
> 
> There are three EHCI controllers on Tegra SoCs, each with its own reset
> line. However, the first controller contains a set of UTMI configuration
> registers that are shared with its siblings. These registers will only
> be reset as part of the first controller's reset. For proper operation
> it must be ensured that the UTMI configuration registers are reset
> before any of the EHCI controllers are enabled, irrespective of the
> probe order.
> 
> Commit a47cc24cd1e5 ("USB: EHCI: tegra: Fix probe order issue leading to
> broken USB") introduced code that ensures the first controller is always
> reset before setting up any of the controllers, and is never again reset
> afterwards.
> 
> This code, however, grabs the wrong reset. Each EHCI controller has two
> reset controls attached: 1) the USB controller reset and 2) the UTMI
> pads reset (really the first controller's reset). In order to reset the
> UTMI pads registers the code must grab the second reset, but instead it
> grabbing the first.
> 
> Signed-off-by: Thierry Reding <treding-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>

Any reason you don't want this backported to stable kernels?

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html