From: Thierry Reding <thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: Thierry Reding <thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: Alexandre Courbot
<gnurou-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Jon Hunter <jonathanh-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>,
linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: [PATCH 8/8] arm64: tegra: Enable XUSB controller on Jetson TX1
Date: Mon, 6 Jun 2016 18:36:37 +0200 [thread overview]
Message-ID: <20160606163637.14234-8-thierry.reding@gmail.com> (raw)
In-Reply-To: <20160606163637.14234-1-thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
From: Thierry Reding <treding-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
Signed-off-by: Thierry Reding <treding-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
---
arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi | 162 +++++++++++++++++++++++++
1 file changed, 162 insertions(+)
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
index 78a16a57fec7..8bba178d8d0f 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
@@ -1278,6 +1278,146 @@
};
};
+ usb@70090000 {
+ phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>,
+ <&{/padctl@7009f000/pads/usb2/lanes/usb2-1}>,
+ <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>,
+ <&{/padctl@7009f000/pads/usb2/lanes/usb2-3}>,
+ <&{/padctl@7009f000/pads/pcie/lanes/pcie-6}>,
+ <&{/padctl@7009f000/pads/pcie/lanes/pcie-5}>;
+ phy-names = "usb2-0", "usb2-1", "usb2-2", "usb2-3", "usb3-0",
+ "usb3-1";
+
+ dvddio-pex-supply = <&vdd_pex_1v05>;
+ hvddio-pex-supply = <&vdd_1v8>;
+ avdd-usb-supply = <&vdd_3v3_sys>;
+ /* XXX what are these? */
+ avdd-pll-utmip-supply = <&vdd_1v8>;
+ avdd-pll-uerefe-supply = <&vdd_pex_1v05>;
+ dvdd-usb-ss-pll-supply = <&vdd_pex_1v05>;
+ hvdd-usb-ss-pll-e-supply = <&vdd_1v8>;
+
+ status = "okay";
+ };
+
+ padctl@7009f000 {
+ status = "okay";
+
+ pads {
+ usb2 {
+ status = "okay";
+
+ lanes {
+ usb2-0 {
+ nvidia,function = "xusb";
+ status = "okay";
+ };
+
+ usb2-1 {
+ nvidia,function = "xusb";
+ status = "okay";
+ };
+
+ usb2-2 {
+ nvidia,function = "xusb";
+ status = "okay";
+ };
+
+ usb2-3 {
+ nvidia,function = "xusb";
+ status = "okay";
+ };
+ };
+ };
+
+ pcie {
+ status = "okay";
+
+ lanes {
+ pcie-0 {
+ nvidia,function = "pcie-x1";
+ status = "okay";
+ };
+
+ pcie-1 {
+ nvidia,function = "pcie-x4";
+ status = "okay";
+ };
+
+ pcie-2 {
+ nvidia,function = "pcie-x4";
+ status = "okay";
+ };
+
+ pcie-3 {
+ nvidia,function = "pcie-x4";
+ status = "okay";
+ };
+
+ pcie-4 {
+ nvidia,function = "pcie-x4";
+ status = "okay";
+ };
+
+ pcie-5 {
+ nvidia,function = "usb3-ss";
+ status = "okay";
+ };
+
+ pcie-6 {
+ nvidia,function = "usb3-ss";
+ status = "okay";
+ };
+ };
+ };
+
+ sata {
+ status = "okay";
+
+ lanes {
+ sata-0 {
+ nvidia,function = "sata";
+ status = "okay";
+ };
+ };
+ };
+ };
+
+ ports {
+ usb2-0 {
+ status = "okay";
+ mode = "otg";
+ };
+
+ usb2-1 {
+ status = "okay";
+ vbus-supply = <&vdd_5v0_rtl>;
+ mode = "host";
+ };
+
+ usb2-2 {
+ status = "okay";
+ vbus-supply = <&vdd_usb_vbus>;
+ mode = "host";
+ };
+
+ usb2-3 {
+ status = "okay";
+ mode = "host";
+ };
+
+ usb3-0 {
+ nvidia,usb2-companion = <1>;
+ status = "okay";
+ };
+
+ usb3-1 {
+ nvidia,usb2-companion = <2>;
+ status = "okay";
+ };
+ };
+ };
+
/* MMC/SD */
sdhci@700b0000 {
status = "okay";
@@ -1390,6 +1530,28 @@
enable-active-high;
vin-supply = <&vdd_1v8>;
};
+
+ vdd_5v0_rtl: regulator@8 {
+ compatible = "regulator-fixed";
+ reg = <8>;
+ regulator-name = "RTL_5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_5v0_sys>;
+ };
+
+ vdd_usb_vbus: regulator@9 {
+ compatible = "regulator-fixed";
+ reg = <9>;
+ regulator-name = "USB_VBUS_EN1";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio TEGRA_GPIO(CC, 5) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_5v0_sys>;
+ };
};
gpio-keys {
--
2.8.3
next prev parent reply other threads:[~2016-06-06 16:36 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-06 16:36 [PATCH 1/8] arm64: tegra: p2180: Add PMIC support Thierry Reding
[not found] ` <20160606163637.14234-1-thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2016-06-06 16:36 ` [PATCH 2/8] arm64: tegra: p2597: Add basic power supplies Thierry Reding
2016-06-06 16:36 ` [PATCH 3/8] arm64: tegra: p2597: Add SDMMC " Thierry Reding
2016-06-06 16:36 ` [PATCH 4/8] arm64: tegra: Add DSI panel on Jetson TX1 Thierry Reding
2016-06-06 16:36 ` [PATCH 5/8] arm64: tegra: Add Tegra210 XUSB pad controller Thierry Reding
2016-06-06 16:36 ` [PATCH 6/8] arm64: tegra: Add Tegra210 XUSB controller Thierry Reding
2016-06-06 16:36 ` [PATCH 7/8] arm64: tegra: Enable debug serial on Jetson TX1 Thierry Reding
2016-06-06 16:36 ` Thierry Reding [this message]
2016-06-09 6:48 ` [PATCH 1/8] arm64: tegra: p2180: Add PMIC support Alexandre Courbot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160606163637.14234-8-thierry.reding@gmail.com \
--to=thierry.reding-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
--cc=gnurou-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=jonathanh-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox