From: Thierry Reding <thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: Thierry Reding <thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: Alexandre Courbot
<acourbot-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>,
Jon Hunter <jonathanh-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>,
Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>,
linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: [PATCH 1/9] arm64: tegra: Add Tegra186 support
Date: Thu, 17 Nov 2016 18:11:23 +0100 [thread overview]
Message-ID: <20161117171131.20062-1-thierry.reding@gmail.com> (raw)
From: Joseph Lo <josephl-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
This adds the initial support of Tegra186 SoC. It provides enough to
enable the serial console and boot from an initial ramdisk.
Signed-off-by: Joseph Lo <josephl-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
[treding-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org: remove leading 0 from unit-addresses]
[treding-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org: remove unused nvidia,bpmp property]
Signed-off-by: Thierry Reding <treding-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
---
arch/arm64/boot/dts/nvidia/tegra186.dtsi | 89 ++++++++++++++++++++++++++++++++
1 file changed, 89 insertions(+)
create mode 100644 arch/arm64/boot/dts/nvidia/tegra186.dtsi
diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
new file mode 100644
index 000000000000..6cb8ac918530
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
@@ -0,0 +1,89 @@
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/mailbox/tegra186-hsp.h>
+
+/ {
+ compatible = "nvidia,tegra186";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ uarta: serial@3100000 {
+ compatible = "nvidia,tegra186-uart", "nvidia,tegra20-uart";
+ reg = <0x0 0x03100000 0x0 0x40>;
+ reg-shift = <2>;
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ gic: interrupt-controller@3881000 {
+ compatible = "arm,gic-400";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x0 0x03881000 0x0 0x1000>,
+ <0x0 0x03882000 0x0 0x2000>;
+ interrupts = <GIC_PPI 9
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ interrupt-parent = <&gic>;
+ };
+
+ hsp_top0: hsp@3c00000 {
+ compatible = "nvidia,tegra186-hsp";
+ reg = <0x0 0x03c00000 0x0 0xa0000>;
+ interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "doorbell";
+ #mbox-cells = <2>;
+ status = "disabled";
+ };
+
+ sysram@30000000 {
+ compatible = "nvidia,tegra186-sysram", "mmio-sram";
+ reg = <0x0 0x30000000 0x0 0x50000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0 0x0 0x0 0x30000000 0x0 0x50000>;
+
+ cpu_bpmp_tx: shmem@4e000 {
+ compatible = "nvidia,tegra186-bpmp-shmem";
+ reg = <0x0 0x4e000 0x0 0x1000>;
+ label = "cpu-bpmp-tx";
+ pool;
+ };
+
+ cpu_bpmp_rx: shmem@4f000 {
+ compatible = "nvidia,tegra186-bpmp-shmem";
+ reg = <0x0 0x4f000 0x0 0x1000>;
+ label = "cpu-bpmp-rx";
+ pool;
+ };
+ };
+
+ bpmp: bpmp {
+ compatible = "nvidia,tegra186-bpmp";
+ mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_DB
+ TEGRA_HSP_DB_MASTER_BPMP>;
+ shmem = <&cpu_bpmp_tx &cpu_bpmp_rx>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+
+ bpmp_i2c: i2c {
+ compatible = "nvidia,tegra186-bpmp-i2c";
+ nvidia,bpmp-bus-id = <5>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ interrupt-parent = <&gic>;
+ };
+};
--
2.10.2
next reply other threads:[~2016-11-17 17:11 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-17 17:11 Thierry Reding [this message]
[not found] ` <20161117171131.20062-1-thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2016-11-17 17:11 ` [PATCH 2/9] arm64: tegra: Add CPU nodes for Tegra186 Thierry Reding
2016-11-17 17:11 ` [PATCH 3/9] arm64: tegra: Add serial ports on Tegra186 Thierry Reding
2016-11-17 17:11 ` [PATCH 4/9] arm64: tegra: Add I2C controllers " Thierry Reding
2016-11-17 17:11 ` [PATCH 5/9] arm64: tegra: Add SDHCI " Thierry Reding
2016-11-17 17:11 ` [PATCH 6/9] arm64: tegra: Add GPIO " Thierry Reding
2016-11-17 17:11 ` [PATCH 7/9] arm64: tegra: Add NVIDIA P3310 processor module support Thierry Reding
2016-11-17 17:11 ` [PATCH 8/9] arm64: tegra: Enable PSCI on P3310 Thierry Reding
[not found] ` <20161117171131.20062-8-thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2016-11-17 17:21 ` Sudeep Holla
[not found] ` <786f354d-a1f2-f2c6-fde7-7b1af3df756c-5wv7dgnIgG8@public.gmane.org>
2016-11-17 17:33 ` Thierry Reding
2016-11-17 17:11 ` [PATCH 9/9] arm64: tegra: Add NVIDIA P2771 board support Thierry Reding
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161117171131.20062-1-thierry.reding@gmail.com \
--to=thierry.reding-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
--cc=acourbot-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org \
--cc=jonathanh-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox