From: Thierry Reding <thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: Thierry Reding <thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: Alexandre Courbot
<acourbot-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>,
Jon Hunter <jonathanh-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>,
Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>,
linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: [PATCH 4/9] arm64: tegra: Add I2C controllers on Tegra186
Date: Thu, 17 Nov 2016 18:11:26 +0100 [thread overview]
Message-ID: <20161117171131.20062-4-thierry.reding@gmail.com> (raw)
In-Reply-To: <20161117171131.20062-1-thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
From: Thierry Reding <treding-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
Tegra186 has a total of nine I2C controllers that are compatible with
the I2C controllers introduced in Tegra114. Two of these controllers
share pads with two DPAUX controllers (for AUX transactions).
Signed-off-by: Thierry Reding <treding-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
---
arch/arm64/boot/dts/nvidia/tegra186.dtsi | 120 +++++++++++++++++++++++++++++++
1 file changed, 120 insertions(+)
diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
index 911f288966ba..b1a77d78d202 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
@@ -69,6 +69,100 @@
status = "disabled";
};
+ gen1_i2c: i2c@3160000 {
+ compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c";
+ reg = <0x0 0x03160000 0x0 0x10000>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&bpmp TEGRA186_CLK_I2C1>;
+ clock-names = "div-clk";
+ resets = <&bpmp TEGRA186_RESET_I2C1>;
+ reset-names = "i2c";
+ status = "disabled";
+ };
+
+ cam_i2c: i2c@3180000 {
+ compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c";
+ reg = <0x0 0x03180000 0x0 0x10000>;
+ interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&bpmp TEGRA186_CLK_I2C3>;
+ clock-names = "div-clk";
+ resets = <&bpmp TEGRA186_RESET_I2C3>;
+ reset-names = "i2c";
+ status = "disabled";
+ };
+
+ /* shares pads with dpaux1 */
+ dp_aux_ch1_i2c: i2c@3190000 {
+ compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c";
+ reg = <0x0 0x03190000 0x0 0x10000>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&bpmp TEGRA186_CLK_I2C4>;
+ clock-names = "div-clk";
+ resets = <&bpmp TEGRA186_RESET_I2C4>;
+ reset-names = "i2c";
+ status = "disabled";
+ };
+
+ /* controlled by BPMP, should not be enabled */
+ pwr_i2c: i2c@31a0000 {
+ compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c";
+ reg = <0x0 0x031a0000 0x0 0x10000>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&bpmp TEGRA186_CLK_I2C5>;
+ clock-names = "div-clk";
+ resets = <&bpmp TEGRA186_RESET_I2C5>;
+ reset-names = "i2c";
+ status = "disabled";
+ };
+
+ /* shares pads with dpaux0 */
+ dp_aux_ch0_i2c: i2c@31b0000 {
+ compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c";
+ reg = <0x0 0x031b0000 0x0 0x10000>;
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&bpmp TEGRA186_CLK_I2C6>;
+ clock-names = "div-clk";
+ resets = <&bpmp TEGRA186_RESET_I2C6>;
+ reset-names = "i2c";
+ status = "disabled";
+ };
+
+ gen7_i2c: i2c@31c0000 {
+ compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c";
+ reg = <0x0 0x031c0000 0x0 0x10000>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&bpmp TEGRA186_CLK_I2C7>;
+ clock-names = "div-clk";
+ resets = <&bpmp TEGRA186_RESET_I2C7>;
+ reset-names = "i2c";
+ status = "disabled";
+ };
+
+ gen9_i2c: i2c@31e0000 {
+ compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c";
+ reg = <0x0 0x031e0000 0x0 0x10000>;
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&bpmp TEGRA186_CLK_I2C9>;
+ clock-names = "div-clk";
+ resets = <&bpmp TEGRA186_RESET_I2C9>;
+ reset-names = "i2c";
+ status = "disabled";
+ };
+
gic: interrupt-controller@3881000 {
compatible = "arm,gic-400";
#interrupt-cells = <3>;
@@ -89,6 +183,32 @@
status = "disabled";
};
+ gen2_i2c: i2c@c240000 {
+ compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c";
+ reg = <0x0 0x0c240000 0x0 0x10000>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&bpmp TEGRA186_CLK_I2C2>;
+ clock-names = "div-clk";
+ resets = <&bpmp TEGRA186_RESET_I2C2>;
+ reset-names = "i2c";
+ status = "disabled";
+ };
+
+ gen8_i2c: i2c@c250000 {
+ compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c";
+ reg = <0x0 0x0c250000 0x0 0x10000>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&bpmp TEGRA186_CLK_I2C8>;
+ clock-names = "div-clk";
+ resets = <&bpmp TEGRA186_RESET_I2C8>;
+ reset-names = "i2c";
+ status = "disabled";
+ };
+
uartc: serial@c280000 {
compatible = "nvidia,tegra186-uart", "nvidia,tegra20-uart";
reg = <0x0 0x0c280000 0x0 0x40>;
--
2.10.2
next prev parent reply other threads:[~2016-11-17 17:11 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-17 17:11 [PATCH 1/9] arm64: tegra: Add Tegra186 support Thierry Reding
[not found] ` <20161117171131.20062-1-thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2016-11-17 17:11 ` [PATCH 2/9] arm64: tegra: Add CPU nodes for Tegra186 Thierry Reding
2016-11-17 17:11 ` [PATCH 3/9] arm64: tegra: Add serial ports on Tegra186 Thierry Reding
2016-11-17 17:11 ` Thierry Reding [this message]
2016-11-17 17:11 ` [PATCH 5/9] arm64: tegra: Add SDHCI controllers " Thierry Reding
2016-11-17 17:11 ` [PATCH 6/9] arm64: tegra: Add GPIO " Thierry Reding
2016-11-17 17:11 ` [PATCH 7/9] arm64: tegra: Add NVIDIA P3310 processor module support Thierry Reding
2016-11-17 17:11 ` [PATCH 8/9] arm64: tegra: Enable PSCI on P3310 Thierry Reding
[not found] ` <20161117171131.20062-8-thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2016-11-17 17:21 ` Sudeep Holla
[not found] ` <786f354d-a1f2-f2c6-fde7-7b1af3df756c-5wv7dgnIgG8@public.gmane.org>
2016-11-17 17:33 ` Thierry Reding
2016-11-17 17:11 ` [PATCH 9/9] arm64: tegra: Add NVIDIA P2771 board support Thierry Reding
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161117171131.20062-4-thierry.reding@gmail.com \
--to=thierry.reding-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
--cc=acourbot-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org \
--cc=jonathanh-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox