From: Thierry Reding <thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: Thierry Reding <thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: Alexandre Courbot
<acourbot-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>,
Jon Hunter <jonathanh-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>,
Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>,
linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: [PATCH 6/9] arm64: tegra: Add GPIO controllers on Tegra186
Date: Thu, 17 Nov 2016 18:11:28 +0100 [thread overview]
Message-ID: <20161117171131.20062-6-thierry.reding@gmail.com> (raw)
In-Reply-To: <20161117171131.20062-1-thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
From: Thierry Reding <treding-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
Tegra186 has two GPIO controllers that are no longer compatible with the
controller found on earlier generations. One of these controllers exists
in an always-on partition of the SoC whereas the other can be clock- and
powergated.
Signed-off-by: Thierry Reding <treding-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
---
arch/arm64/boot/dts/nvidia/tegra186.dtsi | 30 ++++++++++++++++++++++++++++++
1 file changed, 30 insertions(+)
diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
index 1aca69f24fb0..62fa85ae0271 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
@@ -1,4 +1,5 @@
#include <dt-bindings/clock/tegra186-clock.h>
+#include <dt-bindings/gpio/tegra186-gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/mailbox/tegra186-hsp.h>
#include <dt-bindings/reset/tegra186-reset.h>
@@ -9,6 +10,23 @@
#address-cells = <2>;
#size-cells = <2>;
+ gpio: gpio@2200000 {
+ compatible = "nvidia,tegra186-gpio";
+ reg-names = "security", "gpio";
+ reg = <0x0 0x2200000 0x0 0x10000>,
+ <0x0 0x2210000 0x0 0x10000>;
+ interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+
uarta: serial@3100000 {
compatible = "nvidia,tegra186-uart", "nvidia,tegra20-uart";
reg = <0x0 0x03100000 0x0 0x40>;
@@ -277,6 +295,18 @@
status = "disabled";
};
+ gpio_aon: gpio@c2f0000 {
+ compatible = "nvidia,tegra186-gpio-aon";
+ reg-names = "security", "gpio";
+ reg = <0x0 0xc2f0000 0x0 0x1000>,
+ <0x0 0xc2f1000 0x0 0x1000>;
+ interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
sysram@30000000 {
compatible = "nvidia,tegra186-sysram", "mmio-sram";
reg = <0x0 0x30000000 0x0 0x50000>;
--
2.10.2
next prev parent reply other threads:[~2016-11-17 17:11 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-17 17:11 [PATCH 1/9] arm64: tegra: Add Tegra186 support Thierry Reding
[not found] ` <20161117171131.20062-1-thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2016-11-17 17:11 ` [PATCH 2/9] arm64: tegra: Add CPU nodes for Tegra186 Thierry Reding
2016-11-17 17:11 ` [PATCH 3/9] arm64: tegra: Add serial ports on Tegra186 Thierry Reding
2016-11-17 17:11 ` [PATCH 4/9] arm64: tegra: Add I2C controllers " Thierry Reding
2016-11-17 17:11 ` [PATCH 5/9] arm64: tegra: Add SDHCI " Thierry Reding
2016-11-17 17:11 ` Thierry Reding [this message]
2016-11-17 17:11 ` [PATCH 7/9] arm64: tegra: Add NVIDIA P3310 processor module support Thierry Reding
2016-11-17 17:11 ` [PATCH 8/9] arm64: tegra: Enable PSCI on P3310 Thierry Reding
[not found] ` <20161117171131.20062-8-thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2016-11-17 17:21 ` Sudeep Holla
[not found] ` <786f354d-a1f2-f2c6-fde7-7b1af3df756c-5wv7dgnIgG8@public.gmane.org>
2016-11-17 17:33 ` Thierry Reding
2016-11-17 17:11 ` [PATCH 9/9] arm64: tegra: Add NVIDIA P2771 board support Thierry Reding
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161117171131.20062-6-thierry.reding@gmail.com \
--to=thierry.reding-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
--cc=acourbot-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org \
--cc=jonathanh-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox