Linux Tegra architecture development
 help / color / mirror / Atom feed
From: Thierry Reding <thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: Jon Hunter <jonathanh-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
Cc: Felipe Balbi <balbi-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	Dmitry Osipenko <digetx-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
	linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH V2] usb: phy: tegra: Fix phy suspend for UDC
Date: Mon, 2 Oct 2017 13:52:22 +0200	[thread overview]
Message-ID: <20171002115222.GA350@ulmo> (raw)
In-Reply-To: <1506943373-11560-1-git-send-email-jonathanh-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>

[-- Attachment #1: Type: text/plain, Size: 2044 bytes --]

On Mon, Oct 02, 2017 at 12:22:53PM +0100, Jon Hunter wrote:
> Commit dfebb5f43a78 ("usb: chipidea: Add support for Tegra20/30/114/124")
> added UDC support for Tegra but with UDC support enabled, is was found
> that Tegra30, Tegra114 and Tegra124 would hang on entry to suspend.
> 
> The hang occurred during the suspend of the USB PHY when the Tegra PHY
> driver attempted to disable the PHY clock. The problem is that before
> the Tegra PHY driver is suspended, the chipidea driver already disabled
> the PHY clock and when the Tegra PHY driver suspended, it could not read
> DEVLC register and caused the device to hang.
> 
> The Tegra USB PHY driver is used by both the Tegra EHCI driver and now
> the chipidea UDC driver and so simply removing the disabling of the PHY
> clock from the USB PHY driver would not work for the Tegra EHCI driver.
> Fortunately, the status of the USB PHY clock can be read from the
> USB_SUSP_CTRL register and therefore, to workaround this issue, simply
> poll the register prior to disabling the clock in USB PHY driver to see
> if clock gating has already been initiated. Please note that it can take
> a few uS for the clock to disable and so simply reading this status
> register once on entry is not sufficient.
> 
> Similarly when turning on the PHY clock, it is possible that the clock
> is already enabled or in the process of being enabled, and so check for
> this when enabling the PHY.
> 
> Please note that no issues are seen with Tegra20 because it has a slightly
> different PHY to Tegra30/114/124.
> 
> Fixes: dfebb5f43a78 ("usb: chipidea: Add support for Tegra20/30/114/124")
> 
> Signed-off-by: Jon Hunter <jonathanh-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
> ---
> Changes since V1:
> - Added fixes tag
> - Added test in PHY enable to see if clock is already on before enabling
> 
>  drivers/usb/phy/phy-tegra-usb.c | 17 +++++++++++++++++
>  1 file changed, 17 insertions(+)

Acked-by: Thierry Reding <treding-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

  parent reply	other threads:[~2017-10-02 11:52 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-10-02 11:22 [PATCH V2] usb: phy: tegra: Fix phy suspend for UDC Jon Hunter
     [not found] ` <1506943373-11560-1-git-send-email-jonathanh-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2017-10-02 11:52   ` Thierry Reding [this message]
2017-10-09  9:29     ` Jon Hunter
2017-10-02 16:34   ` Dmitry Osipenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20171002115222.GA350@ulmo \
    --to=thierry.reding-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
    --cc=balbi-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=digetx-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=jonathanh-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org \
    --cc=linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox