public inbox for linux-tegra@vger.kernel.org
 help / color / mirror / Atom feed
From: Peter De Schrijver <pdeschrijver@nvidia.com>
To: Dmitry Osipenko <digetx@gmail.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>,
	Viresh Kumar <viresh.kumar@linaro.org>,
	Thierry Reding <thierry.reding@gmail.com>,
	Jonathan Hunter <jonathanh@nvidia.com>,
	linux-tegra@vger.kernel.org, linux-pm@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v1 2/2] cpufreq: tegra20: Use PLL_C as intermediate clock source
Date: Thu, 24 May 2018 13:04:13 +0300	[thread overview]
Message-ID: <20180524100413.GL6835@tbergstrom-lnx.Nvidia.com> (raw)
In-Reply-To: <20180523160020.15291-2-digetx@gmail.com>

On Wed, May 23, 2018 at 07:00:20PM +0300, Dmitry Osipenko wrote:
> PLL_C is running at 600MHz which is significantly higher than the 216MHz
> of the PLL_P and it is known that PLL_C is always-ON because AHB BUS is
> running on that PLL. Let's use PLL_C as intermediate clock source, making
> CPU snappier a tad during of the frequency transition.
> 

pll_c isn't necessarily 600Mhz when used as a source for the second display
head.

Peter.

> Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
> ---
>  drivers/cpufreq/tegra20-cpufreq.c | 25 +++++++++++++++++++++----
>  1 file changed, 21 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/cpufreq/tegra20-cpufreq.c b/drivers/cpufreq/tegra20-cpufreq.c
> index 3ad6bded6efc..4bf5ba7da40b 100644
> --- a/drivers/cpufreq/tegra20-cpufreq.c
> +++ b/drivers/cpufreq/tegra20-cpufreq.c
> @@ -25,12 +25,13 @@
>  #include <linux/types.h>
>  
>  #define PLL_P_FREQ	216000
> +#define PLL_C_FREQ	600000
>  
>  static struct cpufreq_frequency_table freq_table[] = {
>  	{ .frequency = 216000 },
>  	{ .frequency = 312000 },
>  	{ .frequency = 456000 },
> -	{ .frequency = 608000 },
> +	{ .frequency = 600000 },
>  	{ .frequency = 760000 },
>  	{ .frequency = 816000 },
>  	{ .frequency = 912000 },
> @@ -44,6 +45,7 @@ struct tegra20_cpufreq {
>  	struct clk *cpu_clk;
>  	struct clk *pll_x_clk;
>  	struct clk *pll_p_clk;
> +	struct clk *pll_c_clk;
>  	bool pll_x_prepared;
>  };
>  
> @@ -58,7 +60,10 @@ static unsigned int tegra_get_intermediate(struct cpufreq_policy *policy,
>  	if (index == 0 || policy->cur == PLL_P_FREQ)
>  		return 0;
>  
> -	return PLL_P_FREQ;
> +	if (index == 3 || policy->cur == PLL_C_FREQ)
> +		return 0;
> +
> +	return PLL_C_FREQ;
>  }
>  
>  static int tegra_target_intermediate(struct cpufreq_policy *policy,
> @@ -79,7 +84,7 @@ static int tegra_target_intermediate(struct cpufreq_policy *policy,
>  	 */
>  	clk_prepare_enable(cpufreq->pll_x_clk);
>  
> -	ret = clk_set_parent(cpufreq->cpu_clk, cpufreq->pll_p_clk);
> +	ret = clk_set_parent(cpufreq->cpu_clk, cpufreq->pll_c_clk);
>  	if (ret)
>  		clk_disable_unprepare(cpufreq->pll_x_clk);
>  	else
> @@ -101,6 +106,9 @@ static int tegra_target(struct cpufreq_policy *policy, unsigned int index)
>  	if (index == 0)
>  		return clk_set_parent(cpufreq->cpu_clk, cpufreq->pll_p_clk);
>  
> +	if (index == 3)
> +		return clk_set_parent(cpufreq->cpu_clk, cpufreq->pll_c_clk);
> +
>  	ret = clk_set_rate(cpufreq->pll_x_clk, rate * 1000);
>  	/* Restore to earlier frequency on error, i.e. pll_x */
>  	if (ret)
> @@ -174,6 +182,12 @@ static int tegra20_cpufreq_probe(struct platform_device *pdev)
>  		goto put_pll_x;
>  	}
>  
> +	cpufreq->pll_c_clk = clk_get_sys(NULL, "pll_c");
> +	if (IS_ERR(cpufreq->pll_c_clk)) {
> +		err = PTR_ERR(cpufreq->pll_c_clk);
> +		goto put_pll_p;
> +	}
> +
>  	cpufreq->dev = &pdev->dev;
>  	cpufreq->driver.get = cpufreq_generic_get;
>  	cpufreq->driver.attr = cpufreq_generic_attr;
> @@ -190,12 +204,14 @@ static int tegra20_cpufreq_probe(struct platform_device *pdev)
>  
>  	err = cpufreq_register_driver(&cpufreq->driver);
>  	if (err)
> -		goto put_pll_p;
> +		goto put_pll_c;
>  
>  	platform_set_drvdata(pdev, cpufreq);
>  
>  	return 0;
>  
> +put_pll_c:
> +	clk_put(cpufreq->pll_c_clk);
>  put_pll_p:
>  	clk_put(cpufreq->pll_p_clk);
>  put_pll_x:
> @@ -212,6 +228,7 @@ static int tegra20_cpufreq_remove(struct platform_device *pdev)
>  
>  	cpufreq_unregister_driver(&cpufreq->driver);
>  
> +	clk_put(cpufreq->pll_c_clk);
>  	clk_put(cpufreq->pll_p_clk);
>  	clk_put(cpufreq->pll_x_clk);
>  	clk_put(cpufreq->cpu_clk);
> -- 
> 2.17.0
> 

  parent reply	other threads:[~2018-05-24 10:04 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-23 16:00 [PATCH v1 1/2] cpufreq: tegra20: Constify rate value of the intermediate clk Dmitry Osipenko
2018-05-23 16:00 ` [PATCH v1 2/2] cpufreq: tegra20: Use PLL_C as intermediate clock source Dmitry Osipenko
2018-05-24  4:30   ` Viresh Kumar
2018-05-24  5:37     ` Dmitry Osipenko
2018-05-24  8:01       ` Rafael J. Wysocki
2018-05-24 12:28         ` Dmitry Osipenko
2018-05-25  8:14           ` Rafael J. Wysocki
2018-05-25  8:36             ` Rafael J. Wysocki
2018-05-25  8:41               ` Dmitry Osipenko
2018-05-24 10:04   ` Peter De Schrijver [this message]
2018-05-24 12:49     ` Dmitry Osipenko
2018-05-25  6:32       ` Peter De Schrijver
2018-05-25  8:28         ` Dmitry Osipenko
2018-05-24  4:27 ` [PATCH v1 1/2] cpufreq: tegra20: Constify rate value of the intermediate clk Viresh Kumar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180524100413.GL6835@tbergstrom-lnx.Nvidia.com \
    --to=pdeschrijver@nvidia.com \
    --cc=digetx@gmail.com \
    --cc=jonathanh@nvidia.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=rjw@rjwysocki.net \
    --cc=thierry.reding@gmail.com \
    --cc=viresh.kumar@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox