[PATCH AUTOSEL 5.2 11/85] dmaengine: tegra-apb: Error out if DMA_PREP_INTERRUPT flag is unset

[PATCH AUTOSEL 5.2 11/85] dmaengine: tegra-apb: Error out if DMA_PREP_INTERRUPT flag is unset

[Sasha Levin]

From: Dmitry Osipenko <digetx@gmail.com>

[ Upstream commit dc161064beb83c668e0f85766b92b1e7ed186e58 ]

Apparently driver was never tested with DMA_PREP_INTERRUPT flag being
unset since it completely disables interrupt handling instead of skipping
the callbacks invocations, hence putting channel into unusable state.

The flag is always set by all of kernel drivers that use APB DMA, so let's
error out in otherwise case for consistency. It won't be difficult to
support that case properly if ever will be needed.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/tegra20-apb-dma.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/dma/tegra20-apb-dma.c b/drivers/dma/tegra20-apb-dma.c
index ef317c90fbe1..79e9593815f1 100644
--- a/drivers/dma/tegra20-apb-dma.c
+++ b/drivers/dma/tegra20-apb-dma.c
@@ -977,8 +977,12 @@ static struct dma_async_tx_descriptor *tegra_dma_prep_slave_sg(
 		csr |= tdc->slave_id << TEGRA_APBDMA_CSR_REQ_SEL_SHIFT;
 	}
 
-	if (flags & DMA_PREP_INTERRUPT)
+	if (flags & DMA_PREP_INTERRUPT) {
 		csr |= TEGRA_APBDMA_CSR_IE_EOC;
+	} else {
+		WARN_ON_ONCE(1);
+		return NULL;
+	}
 
 	apb_seq |= TEGRA_APBDMA_APBSEQ_WRAP_WORD_1;
 
@@ -1120,8 +1124,12 @@ static struct dma_async_tx_descriptor *tegra_dma_prep_dma_cyclic(
 		csr |= tdc->slave_id << TEGRA_APBDMA_CSR_REQ_SEL_SHIFT;
 	}
 
-	if (flags & DMA_PREP_INTERRUPT)
+	if (flags & DMA_PREP_INTERRUPT) {
 		csr |= TEGRA_APBDMA_CSR_IE_EOC;
+	} else {
+		WARN_ON_ONCE(1);
+		return NULL;
+	}
 
 	apb_seq |= TEGRA_APBDMA_APBSEQ_WRAP_WORD_1;
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 22/85] clk: tegra210: fix PLLU and PLLU_OUT1

[Sasha Levin]

From: JC Kuo <jckuo@nvidia.com>

[ Upstream commit 0d34dfbf3023cf119b83f6470692c0b10c832495 ]

Full-speed and low-speed USB devices do not work with Tegra210
platforms because of incorrect PLLU/PLLU_OUT1 clock settings.

When full-speed device is connected:
[   14.059886] usb 1-3: new full-speed USB device number 2 using tegra-xusb
[   14.196295] usb 1-3: device descriptor read/64, error -71
[   14.436311] usb 1-3: device descriptor read/64, error -71
[   14.675749] usb 1-3: new full-speed USB device number 3 using tegra-xusb
[   14.812335] usb 1-3: device descriptor read/64, error -71
[   15.052316] usb 1-3: device descriptor read/64, error -71
[   15.164799] usb usb1-port3: attempt power cycle

When low-speed device is connected:
[   37.610949] usb usb1-port3: Cannot enable. Maybe the USB cable is bad?
[   38.557376] usb usb1-port3: Cannot enable. Maybe the USB cable is bad?
[   38.564977] usb usb1-port3: attempt power cycle

This commit fixes the issue by:
 1. initializing PLLU_OUT1 before initializing XUSB_FS_SRC clock
    because PLLU_OUT1 is parent of XUSB_FS_SRC.
 2. changing PLLU post-divider to /2 (DIVP=1) according to Technical
    Reference Manual.

Fixes: e745f992cf4b ("clk: tegra: Rework pll_u")
Signed-off-by: JC Kuo <jckuo@nvidia.com>
Acked-By: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/tegra/clk-tegra210.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/tegra/clk-tegra210.c b/drivers/clk/tegra/clk-tegra210.c
index ac1d27a8c650..e5470a6bbf55 100644
--- a/drivers/clk/tegra/clk-tegra210.c
+++ b/drivers/clk/tegra/clk-tegra210.c
@@ -2204,9 +2204,9 @@ static struct div_nmp pllu_nmp = {
 };
 
 static struct tegra_clk_pll_freq_table pll_u_freq_table[] = {
-	{ 12000000, 480000000, 40, 1, 0, 0 },
-	{ 13000000, 480000000, 36, 1, 0, 0 }, /* actual: 468.0 MHz */
-	{ 38400000, 480000000, 25, 2, 0, 0 },
+	{ 12000000, 480000000, 40, 1, 1, 0 },
+	{ 13000000, 480000000, 36, 1, 1, 0 }, /* actual: 468.0 MHz */
+	{ 38400000, 480000000, 25, 2, 1, 0 },
 	{        0,         0,  0, 0, 0, 0 },
 };
 
@@ -3333,6 +3333,7 @@ static struct tegra_clk_init_table init_table[] __initdata = {
 	{ TEGRA210_CLK_DFLL_REF, TEGRA210_CLK_PLL_P, 51000000, 1 },
 	{ TEGRA210_CLK_SBC4, TEGRA210_CLK_PLL_P, 12000000, 1 },
 	{ TEGRA210_CLK_PLL_RE_VCO, TEGRA210_CLK_CLK_MAX, 672000000, 1 },
+	{ TEGRA210_CLK_PLL_U_OUT1, TEGRA210_CLK_CLK_MAX, 48000000, 1 },
 	{ TEGRA210_CLK_XUSB_GATE, TEGRA210_CLK_CLK_MAX, 0, 1 },
 	{ TEGRA210_CLK_XUSB_SS_SRC, TEGRA210_CLK_PLL_U_480M, 120000000, 0 },
 	{ TEGRA210_CLK_XUSB_FS_SRC, TEGRA210_CLK_PLL_U_48M, 48000000, 0 },
@@ -3357,7 +3358,6 @@ static struct tegra_clk_init_table init_table[] __initdata = {
 	{ TEGRA210_CLK_PLL_DP, TEGRA210_CLK_CLK_MAX, 270000000, 0 },
 	{ TEGRA210_CLK_SOC_THERM, TEGRA210_CLK_PLL_P, 51000000, 0 },
 	{ TEGRA210_CLK_CCLK_G, TEGRA210_CLK_CLK_MAX, 0, 1 },
-	{ TEGRA210_CLK_PLL_U_OUT1, TEGRA210_CLK_CLK_MAX, 48000000, 1 },
 	{ TEGRA210_CLK_PLL_U_OUT2, TEGRA210_CLK_CLK_MAX, 60000000, 1 },
 	{ TEGRA210_CLK_SPDIF_IN_SYNC, TEGRA210_CLK_CLK_MAX, 24576000, 0 },
 	{ TEGRA210_CLK_I2S0_SYNC, TEGRA210_CLK_CLK_MAX, 24576000, 0 },
-- 
2.20.1