public inbox for linux-tegra@vger.kernel.org
 help / color / mirror / Atom feed
From: Ben Dooks <ben.dooks@codethink.co.uk>
To: linux-tegra@vger.kernel.org, alsa-devel@alsa-project.org,
	Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>,
	Thierry Reding <thierry.reding@gmail.com>,
	Jonathan Hunter <jonathanh@nvidia.com>
Cc: linux-kernel@lists.codethink.co.uk,
	Ben Dooks <ben.dooks@codethink.co.uk>
Subject: [PATCH v2 5/7] ASoC: tegra: set i2s_offset to 0 for tdm
Date: Mon, 23 Sep 2019 17:20:24 +0100	[thread overview]
Message-ID: <20190923162026.14882-6-ben.dooks@codethink.co.uk> (raw)
In-Reply-To: <20190923162026.14882-1-ben.dooks@codethink.co.uk>

Set the offset to 0 for TDM mode, as per the current setup. Note we also
move the data offset programming to the i2s hw_parameters call as per
the suggestion from Jon Hunter.

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
---
v2:
 - fix the review comments and move the i2s offset setting
---
 sound/soc/tegra/tegra30_i2s.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/sound/soc/tegra/tegra30_i2s.c b/sound/soc/tegra/tegra30_i2s.c
index 1cc43cdd0eee..01463803285d 100644
--- a/sound/soc/tegra/tegra30_i2s.c
+++ b/sound/soc/tegra/tegra30_i2s.c
@@ -66,7 +66,7 @@ static int tegra30_i2s_set_fmt(struct snd_soc_dai *dai,
 				unsigned int fmt)
 {
 	struct tegra30_i2s *i2s = snd_soc_dai_get_drvdata(dai);
-	unsigned int mask = 0, val = 0;
+	unsigned int mask = 0, val = 0, data_offset = 1;
 	unsigned int ch_mask, ch_val = 0;
 
 	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
@@ -95,11 +95,13 @@ static int tegra30_i2s_set_fmt(struct snd_soc_dai *dai,
 		ch_val = TEGRA30_I2S_CH_CTRL_EGDE_CTRL_NEG_EDGE;
 		val |= TEGRA30_I2S_CTRL_FRAME_FORMAT_FSYNC;
 		val |= TEGRA30_I2S_CTRL_LRCK_L_LOW;
+		data_offset = 0;
 		break;
 	case SND_SOC_DAIFMT_DSP_B:
 		ch_val = TEGRA30_I2S_CH_CTRL_EGDE_CTRL_NEG_EDGE;
 		val |= TEGRA30_I2S_CTRL_FRAME_FORMAT_FSYNC;
 		val |= TEGRA30_I2S_CTRL_LRCK_R_LOW;
+		data_offset = 0;
 		break;
 	case SND_SOC_DAIFMT_I2S:
 		val |= TEGRA30_I2S_CTRL_FRAME_FORMAT_LRCK;
@@ -120,6 +122,10 @@ static int tegra30_i2s_set_fmt(struct snd_soc_dai *dai,
 	pm_runtime_get_sync(dai->dev);
 	regmap_update_bits(i2s->regmap, TEGRA30_I2S_CTRL, mask, val);
 	regmap_update_bits(i2s->regmap, TEGRA30_I2S_CH_CTRL, ch_mask, ch_val);
+	val = (data_offset << TEGRA30_I2S_OFFSET_RX_DATA_OFFSET_SHIFT) |
+		(data_offset << TEGRA30_I2S_OFFSET_TX_DATA_OFFSET_SHIFT);
+	regmap_write(i2s->regmap, TEGRA30_I2S_OFFSET, val);
+
 	pm_runtime_put(dai->dev);
 
 	return 0;
@@ -203,11 +209,6 @@ static int tegra30_i2s_hw_params(struct snd_pcm_substream *substream,
 	}
 
 	i2s->soc_data->set_audio_cif(i2s->regmap, reg, &cif_conf);
-
-	val = (1 << TEGRA30_I2S_OFFSET_RX_DATA_OFFSET_SHIFT) |
-	      (1 << TEGRA30_I2S_OFFSET_TX_DATA_OFFSET_SHIFT);
-	regmap_write(i2s->regmap, TEGRA30_I2S_OFFSET, val);
-
 	return 0;
 }
 
-- 
2.23.0

  parent reply	other threads:[~2019-09-23 16:20 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-23 16:20 TDM audio support and sample size updates for tegra30 Ben Dooks
2019-09-23 16:20 ` [PATCH v2 1/7] ASoC: tegra: Add a TDM configuration callback Ben Dooks
2019-09-24  9:22   ` Jon Hunter
2019-09-24  9:26     ` Ben Dooks
2019-09-23 16:20 ` [PATCH v2 2/7] ASoC: tegra: Allow 24bit and 32bit samples Ben Dooks
2019-09-23 16:37   ` Pierre-Louis Bossart
2019-09-24  7:58     ` Ben Dooks
2019-09-23 16:20 ` [PATCH v2 3/7] ASoC: tegra: i2s: Add support for more than 2 channels Ben Dooks
2019-09-23 16:20 ` [PATCH v2 4/7] ASoC: tegra: disable rx_fifo after disable stream Ben Dooks
2019-09-23 16:20 ` Ben Dooks [this message]
2019-09-23 16:20 ` [PATCH v2 6/7] ASoC: tegra: config fifos on hw_param changes Ben Dooks
2019-09-23 16:20 ` [PATCH v2 7/7] ASoC: tegra: take packing settings from the audio cif_config Ben Dooks

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190923162026.14882-6-ben.dooks@codethink.co.uk \
    --to=ben.dooks@codethink.co.uk \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=jonathanh@nvidia.com \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@lists.codethink.co.uk \
    --cc=linux-tegra@vger.kernel.org \
    --cc=perex@perex.cz \
    --cc=thierry.reding@gmail.com \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox