From: Thierry Reding <thierry.reding@gmail.com>
To: Thierry Reding <thierry.reding@gmail.com>
Cc: linux-tegra@vger.kernel.org, dri-devel@lists.freedesktop.org
Subject: [PATCH 19/32] drm/tegra: sor: Stabilize eDP
Date: Thu, 24 Oct 2019 18:45:21 +0200 [thread overview]
Message-ID: <20191024164534.132764-20-thierry.reding@gmail.com> (raw)
In-Reply-To: <20191024164534.132764-1-thierry.reding@gmail.com>
From: Thierry Reding <treding@nvidia.com>
Rework eDP code to correspond more closely to what's documented. This
also improves the reliability of modesets.
Signed-off-by: Thierry Reding <treding@nvidia.com>
---
drivers/gpu/drm/tegra/sor.c | 138 +++++++++++++-----------------------
1 file changed, 49 insertions(+), 89 deletions(-)
diff --git a/drivers/gpu/drm/tegra/sor.c b/drivers/gpu/drm/tegra/sor.c
index 6f979c5fff7b..2023244ad328 100644
--- a/drivers/gpu/drm/tegra/sor.c
+++ b/drivers/gpu/drm/tegra/sor.c
@@ -1878,119 +1878,80 @@ static void tegra_sor_edp_enable(struct drm_encoder *encoder)
pm_runtime_get_sync(sor->dev);
- if (output->panel)
- drm_panel_prepare(output->panel);
+ /* switch to safe parent clock */
+ err = tegra_sor_set_parent_clock(sor, sor->clk_safe);
+ if (err < 0)
+ dev_err(sor->dev, "failed to set safe parent clock: %d\n", err);
+
+ err = tegra_io_rail_power_on(TEGRA_IO_RAIL_LVDS);
+ if (err < 0)
+ dev_err(sor->dev, "failed to power on LVDS rail: %d\n", err);
+
+ usleep_range(20, 100);
err = drm_dp_aux_enable(sor->aux);
if (err < 0)
- dev_err(sor->dev, "failed to enable DP: %d\n", err);
+ dev_err(sor->dev, "failed to enable DPAUX: %d\n", err);
err = drm_dp_link_probe(sor->aux, &sor->link);
- if (err < 0) {
+ if (err < 0)
dev_err(sor->dev, "failed to probe eDP link: %d\n", err);
- return;
- }
- /* switch to safe parent clock */
- err = tegra_sor_set_parent_clock(sor, sor->clk_safe);
+ err = drm_dp_link_choose(&sor->link, mode, info);
if (err < 0)
- dev_err(sor->dev, "failed to set safe parent clock: %d\n", err);
+ dev_err(sor->dev, "failed to choose link: %d\n", err);
- value = tegra_sor_readl(sor, SOR_CLK_CNTRL);
- value &= ~SOR_CLK_CNTRL_DP_CLK_SEL_MASK;
- value |= SOR_CLK_CNTRL_DP_CLK_SEL_SINGLE_DPCLK;
- tegra_sor_writel(sor, value, SOR_CLK_CNTRL);
+ if (output->panel)
+ drm_panel_prepare(output->panel);
value = tegra_sor_readl(sor, sor->soc->regs->pll2);
value &= ~SOR_PLL2_BANDGAP_POWERDOWN;
tegra_sor_writel(sor, value, sor->soc->regs->pll2);
- usleep_range(20, 100);
+
+ usleep_range(20, 40);
value = tegra_sor_readl(sor, sor->soc->regs->pll3);
value |= SOR_PLL3_PLL_VDD_MODE_3V3;
tegra_sor_writel(sor, value, sor->soc->regs->pll3);
- value = SOR_PLL0_ICHPMP(0xf) | SOR_PLL0_VCOCAP_RST |
- SOR_PLL0_PLLREG_LEVEL_V45 | SOR_PLL0_RESISTOR_EXT;
+ value = tegra_sor_readl(sor, sor->soc->regs->pll0);
+ value &= ~(SOR_PLL0_VCOPD | SOR_PLL0_PWR);
tegra_sor_writel(sor, value, sor->soc->regs->pll0);
value = tegra_sor_readl(sor, sor->soc->regs->pll2);
- value |= SOR_PLL2_SEQ_PLLCAPPD;
value &= ~SOR_PLL2_SEQ_PLLCAPPD_ENFORCE;
- value |= SOR_PLL2_LVDS_ENABLE;
+ value |= SOR_PLL2_SEQ_PLLCAPPD;
tegra_sor_writel(sor, value, sor->soc->regs->pll2);
- value = SOR_PLL1_TERM_COMPOUT | SOR_PLL1_TMDS_TERM;
- tegra_sor_writel(sor, value, sor->soc->regs->pll1);
-
- while (true) {
- value = tegra_sor_readl(sor, sor->soc->regs->pll2);
- if ((value & SOR_PLL2_SEQ_PLLCAPPD_ENFORCE) == 0)
- break;
-
- usleep_range(250, 1000);
- }
+ usleep_range(200, 400);
value = tegra_sor_readl(sor, sor->soc->regs->pll2);
value &= ~SOR_PLL2_POWERDOWN_OVERRIDE;
value &= ~SOR_PLL2_PORT_POWERDOWN;
tegra_sor_writel(sor, value, sor->soc->regs->pll2);
- /*
- * power up
- */
-
- /* set safe link bandwidth (1.62 Gbps) */
value = tegra_sor_readl(sor, SOR_CLK_CNTRL);
- value &= ~SOR_CLK_CNTRL_DP_LINK_SPEED_MASK;
- value |= SOR_CLK_CNTRL_DP_LINK_SPEED_G1_62;
+ value &= ~SOR_CLK_CNTRL_DP_CLK_SEL_MASK;
+ value |= SOR_CLK_CNTRL_DP_CLK_SEL_SINGLE_DPCLK;
tegra_sor_writel(sor, value, SOR_CLK_CNTRL);
- /* step 1 */
- value = tegra_sor_readl(sor, sor->soc->regs->pll2);
- value |= SOR_PLL2_SEQ_PLLCAPPD_ENFORCE | SOR_PLL2_PORT_POWERDOWN |
- SOR_PLL2_BANDGAP_POWERDOWN;
- tegra_sor_writel(sor, value, sor->soc->regs->pll2);
-
- value = tegra_sor_readl(sor, sor->soc->regs->pll0);
- value |= SOR_PLL0_VCOPD | SOR_PLL0_PWR;
- tegra_sor_writel(sor, value, sor->soc->regs->pll0);
-
- value = tegra_sor_readl(sor, sor->soc->regs->dp_padctl0);
- value &= ~SOR_DP_PADCTL_PAD_CAL_PD;
- tegra_sor_writel(sor, value, sor->soc->regs->dp_padctl0);
-
- /* step 2 */
- err = tegra_io_pad_power_enable(sor->pad);
- if (err < 0)
- dev_err(sor->dev, "failed to power on I/O pad: %d\n", err);
-
- usleep_range(5, 100);
-
- /* step 3 */
- value = tegra_sor_readl(sor, sor->soc->regs->pll2);
- value &= ~SOR_PLL2_BANDGAP_POWERDOWN;
- tegra_sor_writel(sor, value, sor->soc->regs->pll2);
+ value = tegra_sor_readl(sor, SOR_DP_SPARE0);
+ /* XXX not in TRM */
+ value |= SOR_DP_SPARE_PANEL_INTERNAL;
+ value |= SOR_DP_SPARE_SEQ_ENABLE;
+ tegra_sor_writel(sor, value, SOR_DP_SPARE0);
- usleep_range(20, 100);
+ /* XXX not in TRM */
+ tegra_sor_writel(sor, 0, SOR_LVDS);
- /* step 4 */
value = tegra_sor_readl(sor, sor->soc->regs->pll0);
- value &= ~SOR_PLL0_VCOPD;
- value &= ~SOR_PLL0_PWR;
+ value &= ~SOR_PLL0_ICHPMP_MASK;
+ value &= ~SOR_PLL0_VCOCAP_MASK;
+ value |= SOR_PLL0_ICHPMP(0x1);
+ value |= SOR_PLL0_VCOCAP(0x3);
+ value |= SOR_PLL0_RESISTOR_EXT;
tegra_sor_writel(sor, value, sor->soc->regs->pll0);
- value = tegra_sor_readl(sor, sor->soc->regs->pll2);
- value &= ~SOR_PLL2_SEQ_PLLCAPPD_ENFORCE;
- tegra_sor_writel(sor, value, sor->soc->regs->pll2);
-
- usleep_range(200, 1000);
-
- /* step 5 */
- value = tegra_sor_readl(sor, sor->soc->regs->pll2);
- value &= ~SOR_PLL2_PORT_POWERDOWN;
- tegra_sor_writel(sor, value, sor->soc->regs->pll2);
-
/* XXX not in TRM */
for (value = 0, i = 0; i < 5; i++)
value |= SOR_XBAR_CTRL_LINK0_XSEL(i, sor->xbar_cfg[i]) |
@@ -2015,7 +1976,6 @@ static void tegra_sor_edp_enable(struct drm_encoder *encoder)
value |= SOR_DP_LINKCTL_ENABLE;
tegra_sor_writel(sor, value, SOR_DP_LINKCTL0);
- /* calibrate termination resistance (XXX do this only on HPD) */
tegra_sor_dp_term_calibrate(sor);
err = drm_dp_link_train(&sor->link);
@@ -2025,21 +1985,16 @@ static void tegra_sor_edp_enable(struct drm_encoder *encoder)
dev_dbg(sor->dev, "link training succeeded\n");
err = drm_dp_link_power_up(sor->aux, &sor->link);
- if (err < 0) {
- dev_err(sor->dev, "failed to power up eDP link: %d\n",
- err);
- return;
- }
+ if (err < 0)
+ dev_err(sor->dev, "failed to power up eDP link: %d\n", err);
/* compute configuration */
memset(&config, 0, sizeof(config));
config.bits_per_pixel = state->bpc * 3;
err = tegra_sor_compute_config(sor, mode, &config, &sor->link);
- if (err < 0) {
+ if (err < 0)
dev_err(sor->dev, "failed to compute configuration: %d\n", err);
- return;
- }
tegra_sor_apply_config(sor, &config);
@@ -2067,19 +2022,24 @@ static void tegra_sor_edp_enable(struct drm_encoder *encoder)
tegra_sor_update(sor);
+ err = tegra_sor_power_up(sor, 250);
+ if (err < 0)
+ dev_err(sor->dev, "failed to power up SOR: %d\n", err);
+
+ /* attach and wake up */
+ err = tegra_sor_attach(sor);
+ if (err < 0)
+ dev_err(sor->dev, "failed to attach SOR: %d\n", err);
+
value = tegra_dc_readl(dc, DC_DISP_DISP_WIN_OPTIONS);
value |= SOR_ENABLE(0);
tegra_dc_writel(dc, value, DC_DISP_DISP_WIN_OPTIONS);
tegra_dc_commit(dc);
- err = tegra_sor_attach(sor);
- if (err < 0)
- dev_err(sor->dev, "failed to attach SOR: %d\n", err);
-
err = tegra_sor_wakeup(sor);
if (err < 0)
- dev_err(sor->dev, "failed to enable DC: %d\n", err);
+ dev_err(sor->dev, "failed to wakeup SOR: %d\n", err);
if (output->panel)
drm_panel_enable(output->panel);
--
2.23.0
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2019-10-24 16:45 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-24 16:45 [PATCH 00/32] drm/tegra: Add DisplayPort support Thierry Reding
2019-10-24 16:45 ` [PATCH 01/32] drm/tegra: Add missing kerneldoc for struct drm_dp_link Thierry Reding
2019-10-24 16:45 ` [PATCH 02/32] drm/tegra: dp: Add drm_dp_link_reset() implementation Thierry Reding
2019-10-24 16:45 ` [PATCH 03/32] drm/tegra: dp: Track link capabilities alongside settings Thierry Reding
2019-10-24 16:45 ` [PATCH 04/32] drm/tegra: dp: Turn link capabilities into booleans Thierry Reding
2019-10-24 16:45 ` [PATCH 05/32] drm/tegra: dp: Probe link using existing parsing helpers Thierry Reding
2019-10-24 16:45 ` [PATCH 06/32] drm/tegra: dp: Read fast training capability from link Thierry Reding
2019-10-24 16:45 ` [PATCH 07/32] drm/tegra: dp: Read TPS3 capability from sink Thierry Reding
2019-10-24 16:45 ` [PATCH 08/32] drm/tegra: dp: Read channel coding " Thierry Reding
2019-10-24 16:45 ` [PATCH 09/32] drm/tegra: dp: Read alternate scrambler reset " Thierry Reding
2019-10-24 16:45 ` [PATCH 10/32] drm/tegra: dp: Read eDP version from DPCD Thierry Reding
2019-10-24 16:45 ` [PATCH 11/32] drm/tegra: dp: Read AUX read interval " Thierry Reding
2019-10-24 16:45 ` [PATCH 12/32] drm/tegra: dp: Set channel coding on link configuration Thierry Reding
2019-10-24 16:45 ` [PATCH 13/32] drm/tegra: dp: Enable alternate scrambler reset when supported Thierry Reding
2019-10-24 16:45 ` [PATCH 14/32] drm/tegra: dp: Add drm_dp_link_choose() helper Thierry Reding
2019-10-24 16:45 ` [PATCH 15/32] drm/tegra: dp: Add support for eDP link rates Thierry Reding
2019-10-24 16:45 ` [PATCH 16/32] drm/tegra: dp: Add DisplayPort link training helper Thierry Reding
2019-10-24 16:45 ` [PATCH 17/32] drm/tegra: sor: Use DP link training helpers Thierry Reding
2019-10-24 16:45 ` [PATCH 18/32] drm/tegra: sor: Hook up I2C-over-AUX to output Thierry Reding
2019-10-24 16:45 ` Thierry Reding [this message]
2019-10-24 16:45 ` [PATCH 20/32] drm/tegra: sor: Filter eDP rates Thierry Reding
2019-10-24 16:45 ` [PATCH 21/32] drm/tegra: sor: Add DisplayPort support Thierry Reding
2019-10-24 16:45 ` [PATCH 22/32] drm/tegra: sor: Remove tegra186-sor1 support Thierry Reding
2019-10-24 16:45 ` [PATCH 23/32] drm/tegra: sor: Use correct SOR index on Tegra210 Thierry Reding
2019-10-24 16:45 ` [PATCH 24/32] drm/tegra: sor: Implement pad clock for all SOR instances Thierry Reding
2019-10-24 16:45 ` [PATCH 25/32] drm/tegra: sor: Deduplicate connector type detection code Thierry Reding
2019-10-24 16:45 ` [PATCH 26/32] drm/tegra: sor: Support DisplayPort on Tegra194 Thierry Reding
2019-10-24 16:45 ` [PATCH 27/32] drm/tegra: sor: Unify clock setup for eDP, HDMI and DP Thierry Reding
2019-10-24 16:45 ` [PATCH 28/32] drm/tegra: sor: Use correct I/O pad for DP Thierry Reding
2019-10-24 16:45 ` [PATCH 29/32] drm/tegra: sor: Unify eDP and DP support Thierry Reding
2019-10-24 16:45 ` [PATCH 30/32] drm/tegra: sor: Avoid timeouts on unplug events Thierry Reding
2019-10-24 16:45 ` [PATCH 31/32] drm/tegra: sor: Extract common audio enabling code Thierry Reding
2019-10-24 16:45 ` [PATCH 32/32] drm/tegra: sor: Introduce audio enable/disable callbacks Thierry Reding
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191024164534.132764-20-thierry.reding@gmail.com \
--to=thierry.reding@gmail.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-tegra@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).