From: Thierry Reding <thierry.reding@gmail.com>
To: Ben Skeggs <bskeggs@redhat.com>, Joerg Roedel <joro@8bytes.org>
Cc: linux-tegra@vger.kernel.org, nouveau@lists.freedesktop.org,
Ben Dooks <ben.dooks@codethink.co.uk>,
dri-devel@lists.freedesktop.org
Subject: [PATCH v2 0/9] drm/nouveau: Various fixes for GP10B
Date: Sat, 2 Nov 2019 18:56:28 +0100 [thread overview]
Message-ID: <20191102175637.3065-1-thierry.reding@gmail.com> (raw)
From: Thierry Reding <treding@nvidia.com>
Hi Ben,
here's a revised subset of the patches I had sent out a couple of weeks
ago. I've reworked the BAR2 accesses in the way that you had suggested,
which at least for GP10B turned out to be fairly trivial to do. I have
not looked in detail at this for GV11B yet, but a cursory look showed
that BAR2 is accessed in more places, so the equivalent for GV11B might
be a bit more involved.
Other than that, not a lot has changed since then. I've added a couple
of precursory patches to add IOMMU helper dummies for the case where
IOMMU is disabled (as suggested by Ben Dooks).
Joerg, it'd be great if you could give an Acked-by on those two patches
so that Ben can pick them both up into the Nouveau tree. Alternatively I
can put them both into a stable branch and send a pull request to both
of you. Or yet another alternative would be for Joerg to apply them now
and Ben to wait for v5.5-rc1 until he picks up the rest. All of those
work for me.
Thierry
Thierry Reding (9):
iommu: Document iommu_fwspec::flags field
iommu: Add dummy dev_iommu_fwspec_get() helper
drm/nouveau: fault: Add support for GP10B
drm/nouveau: tegra: Do not try to disable PCI device
drm/nouveau: tegra: Avoid pulsing reset twice
drm/nouveau: tegra: Set clock rate if not set
drm/nouveau: secboot: Read WPR configuration from GPU registers
drm/nouveau: gp10b: Add custom L2 cache implementation
drm/nouveau: gp10b: Use correct copy engine
.../drm/nouveau/include/nvkm/subdev/fault.h | 1 +
.../gpu/drm/nouveau/include/nvkm/subdev/ltc.h | 1 +
drivers/gpu/drm/nouveau/nouveau_drm.c | 3 +-
.../gpu/drm/nouveau/nvkm/engine/device/base.c | 6 +-
.../drm/nouveau/nvkm/engine/device/tegra.c | 24 ++++--
.../gpu/drm/nouveau/nvkm/subdev/fault/Kbuild | 1 +
.../gpu/drm/nouveau/nvkm/subdev/fault/base.c | 2 +-
.../gpu/drm/nouveau/nvkm/subdev/fault/gp100.c | 17 ++--
.../gpu/drm/nouveau/nvkm/subdev/fault/gp10b.c | 53 ++++++++++++
.../gpu/drm/nouveau/nvkm/subdev/fault/gv100.c | 1 +
.../gpu/drm/nouveau/nvkm/subdev/fault/priv.h | 10 +++
.../gpu/drm/nouveau/nvkm/subdev/ltc/Kbuild | 1 +
.../gpu/drm/nouveau/nvkm/subdev/ltc/gp10b.c | 65 +++++++++++++++
.../gpu/drm/nouveau/nvkm/subdev/ltc/priv.h | 2 +
.../drm/nouveau/nvkm/subdev/secboot/gm200.h | 2 +-
.../drm/nouveau/nvkm/subdev/secboot/gm20b.c | 81 ++++++++++++-------
.../drm/nouveau/nvkm/subdev/secboot/gp10b.c | 4 +-
include/linux/iommu.h | 46 ++++++-----
18 files changed, 249 insertions(+), 71 deletions(-)
create mode 100644 drivers/gpu/drm/nouveau/nvkm/subdev/fault/gp10b.c
create mode 100644 drivers/gpu/drm/nouveau/nvkm/subdev/ltc/gp10b.c
--
2.23.0
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next reply other threads:[~2019-11-02 17:56 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-02 17:56 Thierry Reding [this message]
2019-11-02 17:56 ` [PATCH v2 1/9] iommu: Document iommu_fwspec::flags field Thierry Reding
[not found] ` <20191102175637.3065-1-thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2019-11-02 17:56 ` [PATCH v2 2/9] iommu: Add dummy dev_iommu_fwspec_get() helper Thierry Reding
[not found] ` <20191102175637.3065-3-thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2019-11-03 5:17 ` kbuild test robot
2019-11-02 17:56 ` [PATCH v2 3/9] drm/nouveau: fault: Add support for GP10B Thierry Reding
2019-11-02 17:56 ` [PATCH v2 5/9] drm/nouveau: tegra: Avoid pulsing reset twice Thierry Reding
2019-11-02 17:56 ` [PATCH v2 6/9] drm/nouveau: tegra: Set clock rate if not set Thierry Reding
2019-11-02 17:56 ` [PATCH v2 9/9] drm/nouveau: gp10b: Use correct copy engine Thierry Reding
2019-11-18 13:44 ` [PATCH v2 0/9] drm/nouveau: Various fixes for GP10B Thierry Reding
2019-11-20 6:11 ` Ben Skeggs
2019-11-29 11:20 ` Joerg Roedel
2019-11-02 17:56 ` [PATCH v2 4/9] drm/nouveau: tegra: Do not try to disable PCI device Thierry Reding
2019-11-02 17:56 ` [PATCH v2 7/9] drm/nouveau: secboot: Read WPR configuration from GPU registers Thierry Reding
2019-11-02 17:56 ` [PATCH v2 8/9] drm/nouveau: gp10b: Add custom L2 cache implementation Thierry Reding
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191102175637.3065-1-thierry.reding@gmail.com \
--to=thierry.reding@gmail.com \
--cc=ben.dooks@codethink.co.uk \
--cc=bskeggs@redhat.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=joro@8bytes.org \
--cc=linux-tegra@vger.kernel.org \
--cc=nouveau@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).