From: Jon Hunter <jonathanh-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
To: Thierry Reding <thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Jon Hunter <jonathanh-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
Subject: [PATCH 2/4] ARM64: tegra: Add EEPROM supplies
Date: Mon, 24 Feb 2020 14:34:34 +0000 [thread overview]
Message-ID: <20200224143436.5438-2-jonathanh@nvidia.com> (raw)
In-Reply-To: <20200224143436.5438-1-jonathanh-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
The following warning is observed on Jetson TX1, Jetson Nano and Jetson
TX2 platforms because the supply regulators are not specified for the
EEPROMs.
WARNING KERN at24 0-0050: 0-0050 supply vcc not found, using dummy regulator
WARNING KERN at24 0-0057: 0-0057 supply vcc not found, using dummy regulator
For both of these platforms the EEPROM is powered by the main 1.8V
supply rail and so populate the supply for these devices to fix these
warnings.
Signed-off-by: Jon Hunter <jonathanh-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
---
arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts | 1 +
arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi | 1 +
arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi | 1 +
arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts | 1 +
arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts | 2 ++
5 files changed, 6 insertions(+)
diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
index d7628f5afb85..961b1be0c56b 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
@@ -226,6 +226,7 @@
compatible = "atmel,24c02";
reg = <0x57>;
+ vcc-supply = <&vdd_1v8>;
address-bits = <8>;
page-size = <8>;
size = <256>;
diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
index 947744d0f04c..da96de04d003 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
@@ -171,6 +171,7 @@
compatible = "atmel,24c02";
reg = <0x50>;
+ vcc-supply = <&vdd_1v8>;
address-bits = <8>;
page-size = <8>;
size = <256>;
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
index 95b1a6e76e6e..f87d2437d11c 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
@@ -272,6 +272,7 @@
compatible = "atmel,24c02";
reg = <0x50>;
+ vcc-supply = <&vdd_1v8>;
address-bits = <8>;
page-size = <8>;
size = <256>;
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts b/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts
index a3cafe39ba4c..c70a610f8e3a 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts
@@ -85,6 +85,7 @@
compatible = "atmel,24c02";
reg = <0x57>;
+ vcc-supply = <&vdd_1v8>;
address-bits = <8>;
page-size = <8>;
size = <256>;
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts
index 848afd855da6..21ed1756b889 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts
@@ -114,6 +114,7 @@
compatible = "atmel,24c02";
reg = <0x50>;
+ vcc-supply = <&vdd_1v8>;
address-bits = <8>;
page-size = <8>;
size = <256>;
@@ -124,6 +125,7 @@
compatible = "atmel,24c02";
reg = <0x57>;
+ vcc-supply = <&vdd_1v8>;
address-bits = <8>;
page-size = <8>;
size = <256>;
--
2.17.1
next prev parent reply other threads:[~2020-02-24 14:34 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-24 14:34 [PATCH 1/4] ARM64: Tegra: Enable I2C controller for EEPROM Jon Hunter
[not found] ` <20200224143436.5438-1-jonathanh-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2020-02-24 14:34 ` Jon Hunter [this message]
2020-02-24 14:34 ` [PATCH 3/4] ARM64: tegra: Fix Tegra186 SOR supply Jon Hunter
2020-02-24 14:34 ` [PATCH 4/4] ARM64: tegra: Populate LP8557 backlight regulator Jon Hunter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200224143436.5438-2-jonathanh@nvidia.com \
--to=jonathanh-ddmlm1+adcrqt0dzr+alfa@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).