From: Thierry Reding <thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: Thomas Gleixner <tglx-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org>,
Thierry Reding
<thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Jon Hunter <jonathanh-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>,
linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH 1/7] dt-bindings: timer: Add bindings for NVIDIA Tegra186 timers
Date: Fri, 20 Mar 2020 14:34:46 +0100 [thread overview]
Message-ID: <20200320133452.3705040-2-thierry.reding@gmail.com> (raw)
In-Reply-To: <20200320133452.3705040-1-thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
From: Thierry Reding <treding-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
The NVIDIA Tegra186 SoC contains an IP block that provides a register
interface for ten timers with a 29-bit counter that can generate one-
shot, periodic or watchdog interrupts.
Signed-off-by: Thierry Reding <treding-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
---
.../bindings/timer/nvidia,tegra186-timer.yaml | 55 +++++++++++++++++++
1 file changed, 55 insertions(+)
create mode 100644 Documentation/devicetree/bindings/timer/nvidia,tegra186-timer.yaml
diff --git a/Documentation/devicetree/bindings/timer/nvidia,tegra186-timer.yaml b/Documentation/devicetree/bindings/timer/nvidia,tegra186-timer.yaml
new file mode 100644
index 000000000000..f9b55041a5ca
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/nvidia,tegra186-timer.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/nvidia,tegra186-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra186 timers
+
+maintainers:
+ - Thierry Reding <thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
+ - Jonathan Hunter <jonathanh-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
+
+description: |
+ The Tegra186 timer provides ten 29-bit timer counters and one 32-bit TSC
+ (timestamp counter). The timers run at either a fixed 1 MHz clock rate
+ derived from the oscillator clock. Each timer can be programmed to raise
+ one-shot, periodic, or watchdog interrupts.
+
+properties:
+ compatible:
+ oneOf:
+ - description: NVIDIA Tegra186
+ items:
+ - const: nvidia,tegra186-timer
+
+ - description: NVIDIA Tegra194
+ items:
+ - const: nvidia,tegra194-timer
+ - const: nvidia,tegra186-timer
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 10
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ timer@3010000 {
+ compatible = "nvidia,tegra186-timer";
+ reg = <0x03010000 0x000e0000>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
--
2.24.1
next prev parent reply other threads:[~2020-03-20 13:34 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-20 13:34 [PATCH 0/7] clocksource: Add NVIDIA Tegra186 timers support Thierry Reding
[not found] ` <20200320133452.3705040-1-thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2020-03-20 13:34 ` Thierry Reding [this message]
[not found] ` <20200320133452.3705040-2-thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2020-03-30 23:28 ` [PATCH 1/7] dt-bindings: timer: Add bindings for NVIDIA Tegra186 timers Rob Herring
2020-03-20 13:34 ` [PATCH 2/7] clocksource: Add Tegra186 timers support Thierry Reding
[not found] ` <20200320133452.3705040-3-thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2020-03-20 14:39 ` Dmitry Osipenko
2020-03-20 15:04 ` Thierry Reding
2020-03-20 15:23 ` Dmitry Osipenko
2020-03-23 13:38 ` Thierry Reding
[not found] ` <5a559950-0497-b24f-6484-c2513375fe62-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2020-03-31 20:04 ` Thierry Reding
2020-03-20 15:11 ` Dmitry Osipenko
[not found] ` <48b2099c-dd83-d4dc-aab4-8c6f68a215cf-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2020-03-20 15:38 ` Dmitry Osipenko
[not found] ` <da2a0501-664a-c5d0-7b13-174e5347eaf7-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2020-03-23 13:42 ` Thierry Reding
2020-03-23 13:45 ` Dmitry Osipenko
2020-03-23 16:10 ` Dmitry Osipenko
[not found] ` <b3859b98-02a3-d197-735c-2c9a9fbe597c-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2020-03-31 19:58 ` Thierry Reding
2020-03-20 13:34 ` [PATCH 3/7] arm64: tegra: Order nodes by unit-address on Tegra194 Thierry Reding
2020-03-20 13:34 ` [PATCH 4/7] arm64: tegra: Add native timer support on Tegra186 Thierry Reding
2020-03-20 13:34 ` [PATCH 6/7] arm64: tegra: Add native timer support on Tegra194 Thierry Reding
2020-03-20 13:34 ` [PATCH 7/7] arm64: tegra: Enable native timers on Jetson AGX Xavier Thierry Reding
2020-03-20 13:34 ` [PATCH 5/7] arm64: tegra: Enable native timers on Jetson TX2 Thierry Reding
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200320133452.3705040-2-thierry.reding@gmail.com \
--to=thierry.reding-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=jonathanh-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=tglx-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).