From mboxrd@z Thu Jan 1 00:00:00 1970 From: Dmitry Osipenko Subject: [PATCH v4 0/3] Support DRM bridges on NVIDIA Tegra Date: Fri, 17 Apr 2020 20:52:35 +0300 Message-ID: <20200417175238.27154-1-digetx@gmail.com> Mime-Version: 1.0 Content-Transfer-Encoding: 8bit Return-path: Sender: linux-tegra-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Thierry Reding , Sam Ravnborg , Laurent Pinchart Cc: dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org, linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-Id: linux-tegra@vger.kernel.org Hello, This small series adds initial support for the DRM bridges to NVIDIA Tegra DRM driver. This is required by newer device-trees where we model the LVDS encoder bridge properly. Changelog: v4: - Following review comments that were made by Laurent Pinchart to the v3, we now create and use the "bridge connector". v3: - Following recommendation from Sam Ravnborg, the new bridge attachment model is now being used, i.e. we ask bridge to *not* create a connector using the DRM_BRIDGE_ATTACH_NO_CONNECTOR flag. - The bridge is now created only for the RGB (LVDS) output, and only when necessary. For now we don't need bridges for HDMI or DSI outputs. - I noticed that we're leaking OF node in the panel's error code path, this is fixed now by the new patch "Don't leak OF node on error". v2: - Added the new "rgb: Don't register connector if bridge is used" patch, which hides the unused connector provided by the Tegra DRM driver when bridge is used, since bridge provides its own connector to us. - Please notice that the first "Support DRM bridges" patch was previously sent out as a standalone v1 change. Dmitry Osipenko (3): drm/tegra: output: Don't leak OF node on error drm/tegra: output: Support DRM bridges drm/tegra: output: rgb: Support LVDS encoder bridge drivers/gpu/drm/tegra/drm.h | 2 ++ drivers/gpu/drm/tegra/output.c | 22 +++++++++---- drivers/gpu/drm/tegra/rgb.c | 58 ++++++++++++++++++++++++++++------ 3 files changed, 67 insertions(+), 15 deletions(-) -- 2.26.0