From mboxrd@z Thu Jan 1 00:00:00 1970 From: Sasha Levin Subject: [PATCH AUTOSEL 4.14 08/39] phy: tegra: Select USB_COMMON for usb_get_maximum_speed() Date: Thu, 14 May 2020 14:54:25 -0400 Message-ID: <20200514185456.21060-8-sashal@kernel.org> References: <20200514185456.21060-1-sashal@kernel.org> Mime-Version: 1.0 Content-Transfer-Encoding: 8bit Return-path: In-Reply-To: <20200514185456.21060-1-sashal-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> Sender: linux-tegra-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, stable-u79uwXL29TY76Z2rM5mHXA@public.gmane.org Cc: Thierry Reding , kbuild test robot , Nathan Chancellor , Greg Kroah-Hartman , Sasha Levin , linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-Id: linux-tegra@vger.kernel.org From: Thierry Reding [ Upstream commit 0d5c9bc7c68009af04bbadf22306467674c6fb90 ] The usb_get_maximum_speed() function is part of the usb-common module, so enable it by selecting the corresponding Kconfig symbol. While at it, also make sure to depend on USB_SUPPORT because USB_PHY requires that. This can lead to Kconfig conflicts if USB_SUPPORT is not enabled while attempting to enable PHY_TEGRA_XUSB. Reported-by: kbuild test robot Suggested-by: Nathan Chancellor Signed-off-by: Thierry Reding Link: https://lore.kernel.org/r/20200330101038.2422389-1-thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin --- drivers/phy/tegra/Kconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/phy/tegra/Kconfig b/drivers/phy/tegra/Kconfig index a3b1de953fb70..bf4e93b835e91 100644 --- a/drivers/phy/tegra/Kconfig +++ b/drivers/phy/tegra/Kconfig @@ -1,6 +1,7 @@ config PHY_TEGRA_XUSB tristate "NVIDIA Tegra XUSB pad controller driver" - depends on ARCH_TEGRA + depends on ARCH_TEGRA && USB_SUPPORT + select USB_COMMON help Choose this option if you have an NVIDIA Tegra SoC. -- 2.20.1