From mboxrd@z Thu Jan 1 00:00:00 1970 From: Dmitry Osipenko Subject: [PATCH v1 3/6] drm/panel: lvds: Set up panel orientation Date: Sun, 14 Jun 2020 22:03:45 +0300 Message-ID: <20200614190348.12193-4-digetx@gmail.com> References: <20200614190348.12193-1-digetx@gmail.com> Mime-Version: 1.0 Content-Transfer-Encoding: 8bit Return-path: In-Reply-To: <20200614190348.12193-1-digetx@gmail.com> Sender: linux-kernel-owner@vger.kernel.org To: Thierry Reding , Thomas Zimmermann , Derek Basehore , Sam Ravnborg , Laurent Pinchart , Sean Paul Cc: dri-devel@lists.freedesktop.org, linux-tegra@vger.kernel.org, linux-kernel@vger.kernel.org List-Id: linux-tegra@vger.kernel.org The panel orientation needs to parsed from a device-tree and assigned to the panel's connector in order to make orientation property available to userspace. That's what this patch does for the generic LVDS panel. Signed-off-by: Dmitry Osipenko --- drivers/gpu/drm/panel/panel-lvds.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/gpu/drm/panel/panel-lvds.c b/drivers/gpu/drm/panel/panel-lvds.c index 5ce3f4a2b7a1..9421246ac80f 100644 --- a/drivers/gpu/drm/panel/panel-lvds.c +++ b/drivers/gpu/drm/panel/panel-lvds.c @@ -99,6 +99,7 @@ static int panel_lvds_get_modes(struct drm_panel *panel, connector->display_info.bus_flags = lvds->data_mirror ? DRM_BUS_FLAG_DATA_LSB_TO_MSB : DRM_BUS_FLAG_DATA_MSB_TO_LSB; + drm_connector_set_panel_orientation(connector, lvds->panel.orientation); return 1; } @@ -223,6 +224,11 @@ static int panel_lvds_probe(struct platform_device *pdev) drm_panel_init(&lvds->panel, lvds->dev, &panel_lvds_funcs, DRM_MODE_CONNECTOR_LVDS); + ret = of_drm_get_panel_orientation(lvds->dev->of_node, + &lvds->panel.orientation); + if (ret) + return ret; + ret = drm_panel_of_backlight(&lvds->panel); if (ret) return ret; -- 2.26.0