From: Thierry Reding <thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: Thierry Reding <thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: Jon Hunter <jonathanh-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>,
linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: [PATCH 03/73] ARM: tegra: Remove simple regulators bus
Date: Tue, 16 Jun 2020 15:51:28 +0200 [thread overview]
Message-ID: <20200616135238.3001888-4-thierry.reding@gmail.com> (raw)
In-Reply-To: <20200616135238.3001888-1-thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
From: Thierry Reding <treding-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
The standard way to do this is to list out the regulators at the top
level. Adopt the standard way to fix validation.
Signed-off-by: Thierry Reding <treding-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
---
arch/arm/boot/dts/tegra114-dalmore.dts | 129 +++++------
arch/arm/boot/dts/tegra114-roth.dts | 120 +++++-----
arch/arm/boot/dts/tegra114-tn7.dts | 65 +++---
arch/arm/boot/dts/tegra124-jetson-tk1.dts | 238 +++++++++----------
arch/arm/boot/dts/tegra124-nyan.dtsi | 259 ++++++++++-----------
arch/arm/boot/dts/tegra124-venice2.dts | 265 ++++++++++------------
arch/arm/boot/dts/tegra20-harmony.dts | 121 +++++-----
arch/arm/boot/dts/tegra20-medcom-wide.dts | 66 +++---
arch/arm/boot/dts/tegra20-paz00.dts | 38 ++--
arch/arm/boot/dts/tegra20-plutux.dts | 66 +++---
arch/arm/boot/dts/tegra20-seaboard.dts | 125 +++++-----
arch/arm/boot/dts/tegra20-tamonten.dtsi | 39 +---
arch/arm/boot/dts/tegra20-tec.dts | 66 +++---
arch/arm/boot/dts/tegra20-trimslice.dts | 85 +++----
arch/arm/boot/dts/tegra20-ventana.dts | 85 +++----
arch/arm/boot/dts/tegra30-beaver.dts | 193 ++++++++--------
arch/arm/boot/dts/tegra30-cardhu-a02.dts | 128 +++++------
arch/arm/boot/dts/tegra30-cardhu-a04.dts | 149 ++++++------
arch/arm/boot/dts/tegra30-cardhu.dtsi | 261 ++++++++++-----------
19 files changed, 1130 insertions(+), 1368 deletions(-)
diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts
index 04adfcb30cd7..1dfff574e371 100644
--- a/arch/arm/boot/dts/tegra114-dalmore.dts
+++ b/arch/arm/boot/dts/tegra114-dalmore.dts
@@ -1187,83 +1187,70 @@ volume_up {
};
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- vdd_ac_bat_reg: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "vdd_ac_bat";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- };
+ vdd_ac_bat_reg: regulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_ac_bat";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
- dvdd_ts_reg: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "dvdd_ts";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- enable-active-high;
- gpio = <&gpio TEGRA_GPIO(H, 5) GPIO_ACTIVE_HIGH>;
- };
+ dvdd_ts_reg: regulator@1 {
+ compatible = "regulator-fixed";
+ regulator-name = "dvdd_ts";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ enable-active-high;
+ gpio = <&gpio TEGRA_GPIO(H, 5) GPIO_ACTIVE_HIGH>;
+ };
- usb1_vbus_reg: regulator@3 {
- compatible = "regulator-fixed";
- reg = <3>;
- regulator-name = "usb1_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
- gpio-open-drain;
- vin-supply = <&tps65090_dcdc1_reg>;
- };
+ usb1_vbus_reg: regulator@3 {
+ compatible = "regulator-fixed";
+ regulator-name = "usb1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
+ gpio-open-drain;
+ vin-supply = <&tps65090_dcdc1_reg>;
+ };
- usb3_vbus_reg: regulator@4 {
- compatible = "regulator-fixed";
- reg = <4>;
- regulator-name = "usb2_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
- gpio-open-drain;
- vin-supply = <&tps65090_dcdc1_reg>;
- };
+ usb3_vbus_reg: regulator@4 {
+ compatible = "regulator-fixed";
+ regulator-name = "usb2_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
+ gpio-open-drain;
+ vin-supply = <&tps65090_dcdc1_reg>;
+ };
- vdd_hdmi_reg: regulator@5 {
- compatible = "regulator-fixed";
- reg = <5>;
- regulator-name = "vdd_hdmi_5v0";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&tps65090_dcdc1_reg>;
- };
+ vdd_hdmi_reg: regulator@5 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_hdmi_5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&tps65090_dcdc1_reg>;
+ };
- vdd_cam_1v8_reg: regulator@6 {
- compatible = "regulator-fixed";
- reg = <6>;
- regulator-name = "vdd_cam_1v8_reg";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- enable-active-high;
- gpio = <&palmas_gpio 6 0>;
- };
+ vdd_cam_1v8_reg: regulator@6 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_cam_1v8_reg";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ enable-active-high;
+ gpio = <&palmas_gpio 6 0>;
+ };
- vdd_5v0_hdmi: regulator@7 {
- compatible = "regulator-fixed";
- reg = <7>;
- regulator-name = "VDD_5V0_HDMI_CON";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
- enable-active-high;
- vin-supply = <&tps65090_dcdc1_reg>;
- };
+ vdd_5v0_hdmi: regulator@7 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_5V0_HDMI_CON";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&tps65090_dcdc1_reg>;
};
sound {
diff --git a/arch/arm/boot/dts/tegra114-roth.dts b/arch/arm/boot/dts/tegra114-roth.dts
index 73b83d51b59b..5249afdca577 100644
--- a/arch/arm/boot/dts/tegra114-roth.dts
+++ b/arch/arm/boot/dts/tegra114-roth.dts
@@ -1045,76 +1045,64 @@ power {
};
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- lcd_bl_en: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "lcd_bl_en";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-boot-on;
- };
+ lcd_bl_en: regulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "lcd_bl_en";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ };
- vdd_lcd: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "vdd_lcd_1v8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vdd_1v8>;
- enable-active-high;
- gpio = <&gpio TEGRA_GPIO(U, 4) GPIO_ACTIVE_HIGH>;
- regulator-boot-on;
- };
+ vdd_lcd: regulator@1 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_lcd_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vdd_1v8>;
+ enable-active-high;
+ gpio = <&gpio TEGRA_GPIO(U, 4) GPIO_ACTIVE_HIGH>;
+ regulator-boot-on;
+ };
- regulator@2 {
- compatible = "regulator-fixed";
- reg = <2>;
- regulator-name = "vdd_1v8_ts";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- gpio = <&gpio TEGRA_GPIO(K, 3) GPIO_ACTIVE_LOW>;
- regulator-boot-on;
- };
+ regulator@2 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_1v8_ts";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ gpio = <&gpio TEGRA_GPIO(K, 3) GPIO_ACTIVE_LOW>;
+ regulator-boot-on;
+ };
- regulator@3 {
- compatible = "regulator-fixed";
- reg = <3>;
- regulator-name = "vdd_3v3_ts";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- enable-active-high;
- gpio = <&gpio TEGRA_GPIO(H, 5) GPIO_ACTIVE_HIGH>;
- regulator-boot-on;
- };
+ regulator@3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_3v3_ts";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ gpio = <&gpio TEGRA_GPIO(H, 5) GPIO_ACTIVE_HIGH>;
+ regulator-boot-on;
+ };
- regulator@4 {
- compatible = "regulator-fixed";
- reg = <4>;
- regulator-name = "vdd_1v8_com";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vdd_1v8>;
- enable-active-high;
- gpio = <&gpio TEGRA_GPIO(X, 1) GPIO_ACTIVE_HIGH>;
- regulator-boot-on;
- };
+ regulator@4 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_1v8_com";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vdd_1v8>;
+ enable-active-high;
+ gpio = <&gpio TEGRA_GPIO(X, 1) GPIO_ACTIVE_HIGH>;
+ regulator-boot-on;
+ };
- regulator@5 {
- compatible = "regulator-fixed";
- reg = <5>;
- regulator-name = "vdd_3v3_com";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vdd_3v3_sys>;
- enable-active-high;
- gpio = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_HIGH>;
- regulator-always-on;
- regulator-boot-on;
- };
+ regulator@5 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_3v3_com";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vdd_3v3_sys>;
+ enable-active-high;
+ gpio = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_HIGH>;
+ regulator-always-on;
+ regulator-boot-on;
};
};
diff --git a/arch/arm/boot/dts/tegra114-tn7.dts b/arch/arm/boot/dts/tegra114-tn7.dts
index 94e801b7986e..90935db591a5 100644
--- a/arch/arm/boot/dts/tegra114-tn7.dts
+++ b/arch/arm/boot/dts/tegra114-tn7.dts
@@ -302,44 +302,35 @@ volume_up {
};
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- /* FIXME: output of BQ24192 */
- vs_sys: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "VS_SYS";
- regulator-min-microvolt = <4200000>;
- regulator-max-microvolt = <4200000>;
- regulator-always-on;
- regulator-boot-on;
- };
+ /* FIXME: output of BQ24192 */
+ vs_sys: regulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "VS_SYS";
+ regulator-min-microvolt = <4200000>;
+ regulator-max-microvolt = <4200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
- lcd_bl_en: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "VDD_LCD_BL";
- regulator-min-microvolt = <16500000>;
- regulator-max-microvolt = <16500000>;
- gpio = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
- enable-active-high;
- vin-supply = <&vs_sys>;
- regulator-boot-on;
- };
+ lcd_bl_en: regulator@1 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_LCD_BL";
+ regulator-min-microvolt = <16500000>;
+ regulator-max-microvolt = <16500000>;
+ gpio = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vs_sys>;
+ regulator-boot-on;
+ };
- vdd_lcd: regulator@2 {
- compatible = "regulator-fixed";
- reg = <2>;
- regulator-name = "VD_LCD_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- gpio = <&palmas_gpio 4 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- vin-supply = <&vdd_1v8>;
- regulator-boot-on;
- };
+ vdd_lcd: regulator@2 {
+ compatible = "regulator-fixed";
+ regulator-name = "VD_LCD_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ gpio = <&palmas_gpio 4 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_1v8>;
+ regulator-boot-on;
};
};
diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
index 51b217a6507d..e97943871fd8 100644
--- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts
+++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
@@ -1879,145 +1879,127 @@ power {
};
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- vdd_mux: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "+VDD_MUX";
- regulator-min-microvolt = <12000000>;
- regulator-max-microvolt = <12000000>;
- regulator-always-on;
- regulator-boot-on;
- };
+ vdd_mux: regulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "+VDD_MUX";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
- vdd_5v0_sys: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "+5V_SYS";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vdd_mux>;
- };
+ vdd_5v0_sys: regulator@1 {
+ compatible = "regulator-fixed";
+ regulator-name = "+5V_SYS";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vdd_mux>;
+ };
- vdd_3v3_sys: regulator@2 {
- compatible = "regulator-fixed";
- reg = <2>;
- regulator-name = "+3.3V_SYS";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vdd_mux>;
- };
+ vdd_3v3_sys: regulator@2 {
+ compatible = "regulator-fixed";
+ regulator-name = "+3.3V_SYS";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vdd_mux>;
+ };
- vdd_3v3_run: regulator@3 {
- compatible = "regulator-fixed";
- reg = <3>;
- regulator-name = "+3.3V_RUN";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
- gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- vin-supply = <&vdd_3v3_sys>;
- };
+ vdd_3v3_run: regulator@3 {
+ compatible = "regulator-fixed";
+ regulator-name = "+3.3V_RUN";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_3v3_sys>;
+ };
- vdd_3v3_hdmi: regulator@4 {
- compatible = "regulator-fixed";
- reg = <4>;
- regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vdd_3v3_run>;
- };
+ vdd_3v3_hdmi: regulator@4 {
+ compatible = "regulator-fixed";
+ regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vdd_3v3_run>;
+ };
- vdd_usb1_vbus: regulator@7 {
- compatible = "regulator-fixed";
- reg = <7>;
- regulator-name = "+USB0_VBUS_SW";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
- enable-active-high;
- gpio-open-drain;
- vin-supply = <&vdd_5v0_sys>;
- };
+ vdd_usb1_vbus: regulator@5 {
+ compatible = "regulator-fixed";
+ regulator-name = "+USB0_VBUS_SW";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ gpio-open-drain;
+ vin-supply = <&vdd_5v0_sys>;
+ };
- vdd_usb3_vbus: regulator@8 {
- compatible = "regulator-fixed";
- reg = <8>;
- regulator-name = "+5V_USB_HS";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
- enable-active-high;
- gpio-open-drain;
- vin-supply = <&vdd_5v0_sys>;
- };
+ vdd_usb3_vbus: regulator@6 {
+ compatible = "regulator-fixed";
+ regulator-name = "+5V_USB_HS";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ gpio-open-drain;
+ vin-supply = <&vdd_5v0_sys>;
+ };
- vdd_3v3_lp0: regulator@10 {
- compatible = "regulator-fixed";
- reg = <10>;
- regulator-name = "+3.3V_LP0";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
- gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- vin-supply = <&vdd_3v3_sys>;
- };
+ vdd_3v3_lp0: regulator@7 {
+ compatible = "regulator-fixed";
+ regulator-name = "+3.3V_LP0";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_3v3_sys>;
+ };
- vdd_hdmi_pll: regulator@11 {
- compatible = "regulator-fixed";
- reg = <11>;
- regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL";
- regulator-min-microvolt = <1050000>;
- regulator-max-microvolt = <1050000>;
- gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
- vin-supply = <&vdd_1v05_run>;
- };
+ vdd_hdmi_pll: regulator@8 {
+ compatible = "regulator-fixed";
+ regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
+ vin-supply = <&vdd_1v05_run>;
+ };
- vdd_5v0_hdmi: regulator@12 {
- compatible = "regulator-fixed";
- reg = <12>;
- regulator-name = "+5V_HDMI_CON";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
- enable-active-high;
- vin-supply = <&vdd_5v0_sys>;
- };
+ vdd_5v0_hdmi: regulator@9 {
+ compatible = "regulator-fixed";
+ regulator-name = "+5V_HDMI_CON";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_5v0_sys>;
+ };
- /* Molex power connector */
- vdd_5v0_sata: regulator@13 {
- compatible = "regulator-fixed";
- reg = <13>;
- regulator-name = "+5V_SATA";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio TEGRA_GPIO(EE, 2) GPIO_ACTIVE_HIGH>;
- enable-active-high;
- vin-supply = <&vdd_5v0_sys>;
- };
+ /* Molex power connector */
+ vdd_5v0_sata: regulator@10 {
+ compatible = "regulator-fixed";
+ regulator-name = "+5V_SATA";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio TEGRA_GPIO(EE, 2) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_5v0_sys>;
+ };
- vdd_12v0_sata: regulator@14 {
- compatible = "regulator-fixed";
- reg = <14>;
- regulator-name = "+12V_SATA";
- regulator-min-microvolt = <12000000>;
- regulator-max-microvolt = <12000000>;
- gpio = <&gpio TEGRA_GPIO(EE, 2) GPIO_ACTIVE_HIGH>;
- enable-active-high;
- vin-supply = <&vdd_mux>;
- };
+ vdd_12v0_sata: regulator@11 {
+ compatible = "regulator-fixed";
+ regulator-name = "+12V_SATA";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ gpio = <&gpio TEGRA_GPIO(EE, 2) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_mux>;
};
sound {
diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi b/arch/arm/boot/dts/tegra124-nyan.dtsi
index 4555d01094b5..b3b5c12cbda9 100644
--- a/arch/arm/boot/dts/tegra124-nyan.dtsi
+++ b/arch/arm/boot/dts/tegra124-nyan.dtsi
@@ -608,157 +608,138 @@ power {
};
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- vdd_mux: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "+VDD_MUX";
- regulator-min-microvolt = <12000000>;
- regulator-max-microvolt = <12000000>;
- regulator-always-on;
- regulator-boot-on;
- };
+ vdd_mux: regulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "+VDD_MUX";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
- vdd_5v0_sys: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "+5V_SYS";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vdd_mux>;
- };
+ vdd_5v0_sys: regulator@1 {
+ compatible = "regulator-fixed";
+ regulator-name = "+5V_SYS";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vdd_mux>;
+ };
- vdd_3v3_sys: regulator@2 {
- compatible = "regulator-fixed";
- reg = <2>;
- regulator-name = "+3.3V_SYS";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vdd_mux>;
- };
+ vdd_3v3_sys: regulator@2 {
+ compatible = "regulator-fixed";
+ regulator-name = "+3.3V_SYS";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vdd_mux>;
+ };
- vdd_3v3_run: regulator@3 {
- compatible = "regulator-fixed";
- reg = <3>;
- regulator-name = "+3.3V_RUN";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
- gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- vin-supply = <&vdd_3v3_sys>;
- };
+ vdd_3v3_run: regulator@3 {
+ compatible = "regulator-fixed";
+ regulator-name = "+3.3V_RUN";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_3v3_sys>;
+ };
- vdd_3v3_hdmi: regulator@4 {
- compatible = "regulator-fixed";
- reg = <4>;
- regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vdd_3v3_run>;
- };
+ vdd_3v3_hdmi: regulator@4 {
+ compatible = "regulator-fixed";
+ regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vdd_3v3_run>;
+ };
- vdd_led: regulator@5 {
- compatible = "regulator-fixed";
- reg = <5>;
- regulator-name = "+VDD_LED";
- gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
- enable-active-high;
- vin-supply = <&vdd_mux>;
- };
+ vdd_led: regulator@5 {
+ compatible = "regulator-fixed";
+ regulator-name = "+VDD_LED";
+ gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_mux>;
+ };
- vdd_5v0_ts: regulator@6 {
- compatible = "regulator-fixed";
- reg = <6>;
- regulator-name = "+5V_VDD_TS_SW";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-boot-on;
- gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
- enable-active-high;
- vin-supply = <&vdd_5v0_sys>;
- };
+ vdd_5v0_ts: regulator@6 {
+ compatible = "regulator-fixed";
+ regulator-name = "+5V_VDD_TS_SW";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_5v0_sys>;
+ };
- vdd_usb1_vbus: regulator@7 {
- compatible = "regulator-fixed";
- reg = <7>;
- regulator-name = "+5V_USB_HS";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
- enable-active-high;
- gpio-open-drain;
- vin-supply = <&vdd_5v0_sys>;
- };
+ vdd_usb1_vbus: regulator@7 {
+ compatible = "regulator-fixed";
+ regulator-name = "+5V_USB_HS";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ gpio-open-drain;
+ vin-supply = <&vdd_5v0_sys>;
+ };
- vdd_usb3_vbus: regulator@8 {
- compatible = "regulator-fixed";
- reg = <8>;
- regulator-name = "+5V_USB_SS";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
- enable-active-high;
- gpio-open-drain;
- vin-supply = <&vdd_5v0_sys>;
- };
+ vdd_usb3_vbus: regulator@8 {
+ compatible = "regulator-fixed";
+ regulator-name = "+5V_USB_SS";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ gpio-open-drain;
+ vin-supply = <&vdd_5v0_sys>;
+ };
- vdd_3v3_panel: regulator@9 {
- compatible = "regulator-fixed";
- reg = <9>;
- regulator-name = "+3.3V_PANEL";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&pmic 4 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- vin-supply = <&vdd_3v3_run>;
- };
+ vdd_3v3_panel: regulator@9 {
+ compatible = "regulator-fixed";
+ regulator-name = "+3.3V_PANEL";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&pmic 4 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_3v3_run>;
+ };
- vdd_3v3_lp0: regulator@10 {
- compatible = "regulator-fixed";
- reg = <10>;
- regulator-name = "+3.3V_LP0";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- /*
- * TODO: find a way to wire this up with the USB EHCI
- * controllers so that it can be enabled on demand.
- */
- regulator-always-on;
- gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- vin-supply = <&vdd_3v3_sys>;
- };
+ vdd_3v3_lp0: regulator@10 {
+ compatible = "regulator-fixed";
+ regulator-name = "+3.3V_LP0";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ /*
+ * TODO: find a way to wire this up with the USB EHCI
+ * controllers so that it can be enabled on demand.
+ */
+ regulator-always-on;
+ gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_3v3_sys>;
+ };
- vdd_hdmi_pll: regulator@11 {
- compatible = "regulator-fixed";
- reg = <11>;
- regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL";
- regulator-min-microvolt = <1050000>;
- regulator-max-microvolt = <1050000>;
- gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
- vin-supply = <&vdd_1v05_run>;
- };
+ vdd_hdmi_pll: regulator@11 {
+ compatible = "regulator-fixed";
+ regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
+ vin-supply = <&vdd_1v05_run>;
+ };
- vdd_5v0_hdmi: regulator@12 {
- compatible = "regulator-fixed";
- reg = <12>;
- regulator-name = "+5V_HDMI_CON";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
- enable-active-high;
- vin-supply = <&vdd_5v0_sys>;
- };
+ vdd_5v0_hdmi: regulator@12 {
+ compatible = "regulator-fixed";
+ regulator-name = "+5V_HDMI_CON";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_5v0_sys>;
};
sound {
diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts
index 6a7a31c831c5..effdb303c7f7 100644
--- a/arch/arm/boot/dts/tegra124-venice2.dts
+++ b/arch/arm/boot/dts/tegra124-venice2.dts
@@ -1077,164 +1077,145 @@ power {
panel: panel {
compatible = "lg,lp129qe";
-
+ power-supply = <&vdd_3v3_panel>;
backlight = <&backlight>;
ddc-i2c-bus = <&dpaux>;
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- vdd_mux: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "+VDD_MUX";
- regulator-min-microvolt = <12000000>;
- regulator-max-microvolt = <12000000>;
- regulator-always-on;
- regulator-boot-on;
- };
+ vdd_mux: regulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "+VDD_MUX";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
- vdd_5v0_sys: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "+5V_SYS";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vdd_mux>;
- };
+ vdd_5v0_sys: regulator@1 {
+ compatible = "regulator-fixed";
+ regulator-name = "+5V_SYS";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vdd_mux>;
+ };
- vdd_3v3_sys: regulator@2 {
- compatible = "regulator-fixed";
- reg = <2>;
- regulator-name = "+3.3V_SYS";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vdd_mux>;
- };
+ vdd_3v3_sys: regulator@2 {
+ compatible = "regulator-fixed";
+ regulator-name = "+3.3V_SYS";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vdd_mux>;
+ };
- vdd_3v3_run: regulator@3 {
- compatible = "regulator-fixed";
- reg = <3>;
- regulator-name = "+3.3V_RUN";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
- gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- vin-supply = <&vdd_3v3_sys>;
- };
+ vdd_3v3_run: regulator@3 {
+ compatible = "regulator-fixed";
+ regulator-name = "+3.3V_RUN";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_3v3_sys>;
+ };
- vdd_3v3_hdmi: regulator@4 {
- compatible = "regulator-fixed";
- reg = <4>;
- regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vdd_3v3_run>;
- };
+ vdd_3v3_hdmi: regulator@4 {
+ compatible = "regulator-fixed";
+ regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vdd_3v3_run>;
+ };
- vdd_led: regulator@5 {
- compatible = "regulator-fixed";
- reg = <5>;
- regulator-name = "+VDD_LED";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
- enable-active-high;
- vin-supply = <&vdd_mux>;
- };
+ vdd_led: regulator@5 {
+ compatible = "regulator-fixed";
+ regulator-name = "+VDD_LED";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_mux>;
+ };
- vdd_5v0_ts: regulator@6 {
- compatible = "regulator-fixed";
- reg = <6>;
- regulator-name = "+5V_VDD_TS_SW";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-boot-on;
- gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
- enable-active-high;
- vin-supply = <&vdd_5v0_sys>;
- };
+ vdd_5v0_ts: regulator@6 {
+ compatible = "regulator-fixed";
+ regulator-name = "+5V_VDD_TS_SW";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_5v0_sys>;
+ };
- vdd_usb1_vbus: regulator@7 {
- compatible = "regulator-fixed";
- reg = <7>;
- regulator-name = "+5V_USB_HS";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
- enable-active-high;
- gpio-open-drain;
- vin-supply = <&vdd_5v0_sys>;
- };
+ vdd_usb1_vbus: regulator@7 {
+ compatible = "regulator-fixed";
+ regulator-name = "+5V_USB_HS";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ gpio-open-drain;
+ vin-supply = <&vdd_5v0_sys>;
+ };
- vdd_usb3_vbus: regulator@8 {
- compatible = "regulator-fixed";
- reg = <8>;
- regulator-name = "+5V_USB_SS";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
- enable-active-high;
- gpio-open-drain;
- vin-supply = <&vdd_5v0_sys>;
- };
+ vdd_usb3_vbus: regulator@8 {
+ compatible = "regulator-fixed";
+ regulator-name = "+5V_USB_SS";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ gpio-open-drain;
+ vin-supply = <&vdd_5v0_sys>;
+ };
- vdd_3v3_panel: regulator@9 {
- compatible = "regulator-fixed";
- reg = <9>;
- regulator-name = "+3.3V_PANEL";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&pmic 4 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- vin-supply = <&vdd_3v3_run>;
- };
+ vdd_3v3_panel: regulator@9 {
+ compatible = "regulator-fixed";
+ regulator-name = "+3.3V_PANEL";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&pmic 4 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_3v3_run>;
+ };
- vdd_3v3_lp0: regulator@10 {
- compatible = "regulator-fixed";
- reg = <10>;
- regulator-name = "+3.3V_LP0";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- /*
- * TODO: find a way to wire this up with the USB EHCI
- * controllers so that it can be enabled on demand.
- */
- regulator-always-on;
- gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- vin-supply = <&vdd_3v3_sys>;
- };
+ vdd_3v3_lp0: regulator@10 {
+ compatible = "regulator-fixed";
+ regulator-name = "+3.3V_LP0";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ /*
+ * TODO: find a way to wire this up with the USB EHCI
+ * controllers so that it can be enabled on demand.
+ */
+ regulator-always-on;
+ gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_3v3_sys>;
+ };
- vdd_hdmi_pll: regulator@11 {
- compatible = "regulator-fixed";
- reg = <11>;
- regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL";
- regulator-min-microvolt = <1050000>;
- regulator-max-microvolt = <1050000>;
- gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
- vin-supply = <&vdd_1v05_run>;
- };
+ vdd_hdmi_pll: regulator@11 {
+ compatible = "regulator-fixed";
+ regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
+ vin-supply = <&vdd_1v05_run>;
+ };
- vdd_5v0_hdmi: regulator@12 {
- compatible = "regulator-fixed";
- reg = <12>;
- regulator-name = "+5V_HDMI_CON";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
- enable-active-high;
- vin-supply = <&vdd_5v0_sys>;
- };
+ vdd_5v0_hdmi: regulator@12 {
+ compatible = "regulator-fixed";
+ regulator-name = "+5V_HDMI_CON";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_5v0_sys>;
};
sound {
diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts
index bdfbe26fa26a..b051d75d4642 100644
--- a/arch/arm/boot/dts/tegra20-harmony.dts
+++ b/arch/arm/boot/dts/tegra20-harmony.dts
@@ -666,79 +666,66 @@ panel: panel {
backlight = <&backlight>;
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- vdd_5v0_reg: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "vdd_5v0";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- };
+ vdd_5v0_reg: regulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
- regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "vdd_1v5";
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <1500000>;
- gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
- };
+ regulator@1 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_1v5";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
+ };
- regulator@2 {
- compatible = "regulator-fixed";
- reg = <2>;
- regulator-name = "vdd_1v2";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
+ regulator@2 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_1v2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
- pci_vdd_reg: regulator@3 {
- compatible = "regulator-fixed";
- reg = <3>;
- regulator-name = "vdd_1v05";
- regulator-min-microvolt = <1050000>;
- regulator-max-microvolt = <1050000>;
- gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
+ pci_vdd_reg: regulator@3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_1v05";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
- vdd_pnl_reg: regulator@4 {
- compatible = "regulator-fixed";
- reg = <4>;
- regulator-name = "vdd_pnl";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
+ vdd_pnl_reg: regulator@4 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_pnl";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
- vdd_bl_reg: regulator@5 {
- compatible = "regulator-fixed";
- reg = <5>;
- regulator-name = "vdd_bl";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- gpio = <&gpio TEGRA_GPIO(W, 0) GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
+ vdd_bl_reg: regulator@5 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_bl";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ gpio = <&gpio TEGRA_GPIO(W, 0) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
- vdd_5v0_hdmi: regulator@6 {
- compatible = "regulator-fixed";
- reg = <6>;
- regulator-name = "VDDIO_HDMI";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio TEGRA_GPIO(T, 2) GPIO_ACTIVE_HIGH>;
- enable-active-high;
- vin-supply = <&vdd_5v0_reg>;
- };
+ vdd_5v0_hdmi: regulator@6 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDIO_HDMI";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio TEGRA_GPIO(T, 2) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_5v0_reg>;
};
sound {
diff --git a/arch/arm/boot/dts/tegra20-medcom-wide.dts b/arch/arm/boot/dts/tegra20-medcom-wide.dts
index c73510cd501c..049181421a86 100644
--- a/arch/arm/boot/dts/tegra20-medcom-wide.dts
+++ b/arch/arm/boot/dts/tegra20-medcom-wide.dts
@@ -92,44 +92,38 @@ sound {
clock-names = "pll_a", "pll_a_out0", "mclk";
};
- regulators {
- vcc_24v_reg: regulator@100 {
- compatible = "regulator-fixed";
- reg = <100>;
- regulator-name = "vcc_24v";
- regulator-min-microvolt = <24000000>;
- regulator-max-microvolt = <24000000>;
- regulator-always-on;
- };
+ vcc_24v_reg: regulator@100 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_24v";
+ regulator-min-microvolt = <24000000>;
+ regulator-max-microvolt = <24000000>;
+ regulator-always-on;
+ };
- vdd_5v0_reg: regulator@101 {
- compatible = "regulator-fixed";
- reg = <101>;
- regulator-name = "vdd_5v0";
- vin-supply = <&vcc_24v_reg>;
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- };
+ vdd_5v0_reg: regulator@101 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_5v0";
+ vin-supply = <&vcc_24v_reg>;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
- vdd_3v3_reg: regulator@102 {
- compatible = "regulator-fixed";
- reg = <102>;
- regulator-name = "vdd_3v3";
- vin-supply = <&vcc_24v_reg>;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
+ vdd_3v3_reg: regulator@102 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_3v3";
+ vin-supply = <&vcc_24v_reg>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
- vdd_1v8_reg: regulator@103 {
- compatible = "regulator-fixed";
- reg = <103>;
- regulator-name = "vdd_1v8";
- vin-supply = <&vdd_3v3_reg>;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
+ vdd_1v8_reg: regulator@103 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_1v8";
+ vin-supply = <&vdd_3v3_reg>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
};
};
diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts
index bfc9625a6c72..2a0e5754f50f 100644
--- a/arch/arm/boot/dts/tegra20-paz00.dts
+++ b/arch/arm/boot/dts/tegra20-paz00.dts
@@ -606,30 +606,22 @@ panel: panel {
backlight = <&backlight>;
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- p5valw_reg: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "+5valw";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- };
+ p5valw_reg: regulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "+5valw";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
- vdd_pnl_reg: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "+3VS,vdd_pnl";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- gpio = <&gpio TEGRA_GPIO(A, 4) GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
+ vdd_pnl_reg: regulator@1 {
+ compatible = "regulator-fixed";
+ regulator-name = "+3VS,vdd_pnl";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ gpio = <&gpio TEGRA_GPIO(A, 4) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
};
sound {
diff --git a/arch/arm/boot/dts/tegra20-plutux.dts b/arch/arm/boot/dts/tegra20-plutux.dts
index 429e4605fbdb..378f23b2958b 100644
--- a/arch/arm/boot/dts/tegra20-plutux.dts
+++ b/arch/arm/boot/dts/tegra20-plutux.dts
@@ -60,44 +60,38 @@ sound {
clock-names = "pll_a", "pll_a_out0", "mclk";
};
- regulators {
- vcc_24v_reg: regulator@100 {
- compatible = "regulator-fixed";
- reg = <100>;
- regulator-name = "vcc_24v";
- regulator-min-microvolt = <24000000>;
- regulator-max-microvolt = <24000000>;
- regulator-always-on;
- };
+ vcc_24v_reg: regulator@100 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_24v";
+ regulator-min-microvolt = <24000000>;
+ regulator-max-microvolt = <24000000>;
+ regulator-always-on;
+ };
- vdd_5v0_reg: regulator@101 {
- compatible = "regulator-fixed";
- reg = <101>;
- regulator-name = "vdd_5v0";
- vin-supply = <&vcc_24v_reg>;
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- };
+ vdd_5v0_reg: regulator@101 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_5v0";
+ vin-supply = <&vcc_24v_reg>;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
- vdd_3v3_reg: regulator@102 {
- compatible = "regulator-fixed";
- reg = <102>;
- regulator-name = "vdd_3v3";
- vin-supply = <&vcc_24v_reg>;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
+ vdd_3v3_reg: regulator@102 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_3v3";
+ vin-supply = <&vcc_24v_reg>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
- vdd_1v8_reg: regulator@103 {
- compatible = "regulator-fixed";
- reg = <103>;
- regulator-name = "vdd_1v8";
- vin-supply = <&vdd_3v3_reg>;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
+ vdd_1v8_reg: regulator@103 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_1v8";
+ vin-supply = <&vdd_3v3_reg>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
};
};
diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts
index 28dcff3b7d7e..9a1ab4bd43e0 100644
--- a/arch/arm/boot/dts/tegra20-seaboard.dts
+++ b/arch/arm/boot/dts/tegra20-seaboard.dts
@@ -828,81 +828,68 @@ panel: panel {
ddc-i2c-bus = <&lvds_ddc>;
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- vdd_5v0_reg: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "vdd_5v0";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- };
+ vdd_5v0_reg: regulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
- regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "vdd_1v5";
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <1500000>;
- gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
- };
+ regulator@1 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_1v5";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
+ };
- regulator@2 {
- compatible = "regulator-fixed";
- reg = <2>;
- regulator-name = "vdd_1v2";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
+ regulator@2 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_1v2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
- vbus_reg: regulator@3 {
- compatible = "regulator-fixed";
- reg = <3>;
- regulator-name = "vdd_vbus_wup1";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- gpio = <&gpio TEGRA_GPIO(D, 0) 0>;
- regulator-always-on;
- regulator-boot-on;
- };
+ vbus_reg: regulator@3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_vbus_wup1";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&gpio TEGRA_GPIO(D, 0) 0>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
- vdd_pnl_reg: regulator@4 {
- compatible = "regulator-fixed";
- reg = <4>;
- regulator-name = "vdd_pnl";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
+ vdd_pnl_reg: regulator@4 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_pnl";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
- vdd_bl_reg: regulator@5 {
- compatible = "regulator-fixed";
- reg = <5>;
- regulator-name = "vdd_bl";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- gpio = <&gpio TEGRA_GPIO(W, 0) GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
+ vdd_bl_reg: regulator@5 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_bl";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ gpio = <&gpio TEGRA_GPIO(W, 0) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
- vdd_hdmi: regulator@6 {
- compatible = "regulator-fixed";
- reg = <6>;
- regulator-name = "VDDIO_HDMI";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_HIGH>;
- enable-active-high;
- vin-supply = <&vdd_5v0_reg>;
- };
+ vdd_hdmi: regulator@6 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDIO_HDMI";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_5v0_reg>;
};
sound {
diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi
index 20137fc578b1..95e6bccdb4f6 100644
--- a/arch/arm/boot/dts/tegra20-tamonten.dtsi
+++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi
@@ -495,40 +495,25 @@ usb-phy@c5008000 {
status = "okay";
};
- sdhci@c8000600 {
+ mmc@c8000600 {
cd-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio TEGRA_GPIO(H, 3) GPIO_ACTIVE_HIGH>;
bus-width = <4>;
status = "okay";
};
- clocks {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- clk32k_in: clock@0 {
- compatible = "fixed-clock";
- reg = <0>;
- #clock-cells = <0>;
- clock-frequency = <32768>;
- };
+ clk32k_in: clock@0 {
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ #clock-cells = <0>;
};
- regulators {
- compatible = "simple-bus";
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- pci_vdd_reg: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "vdd_1v05";
- regulator-min-microvolt = <1050000>;
- regulator-max-microvolt = <1050000>;
- gpio = <&pmic 2 0>;
- enable-active-high;
- };
+ pci_vdd_reg: regulator@1 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_1v05";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ gpio = <&pmic 2 0>;
+ enable-active-high;
};
};
diff --git a/arch/arm/boot/dts/tegra20-tec.dts b/arch/arm/boot/dts/tegra20-tec.dts
index 4dec27737238..44ced60315de 100644
--- a/arch/arm/boot/dts/tegra20-tec.dts
+++ b/arch/arm/boot/dts/tegra20-tec.dts
@@ -69,44 +69,38 @@ sound {
clock-names = "pll_a", "pll_a_out0", "mclk";
};
- regulators {
- vcc_24v_reg: regulator@100 {
- compatible = "regulator-fixed";
- reg = <100>;
- regulator-name = "vcc_24v";
- regulator-min-microvolt = <24000000>;
- regulator-max-microvolt = <24000000>;
- regulator-always-on;
- };
+ vcc_24v_reg: regulator@100 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_24v";
+ regulator-min-microvolt = <24000000>;
+ regulator-max-microvolt = <24000000>;
+ regulator-always-on;
+ };
- vdd_5v0_reg: regulator@101 {
- compatible = "regulator-fixed";
- reg = <101>;
- regulator-name = "vdd_5v0";
- vin-supply = <&vcc_24v_reg>;
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- };
+ vdd_5v0_reg: regulator@101 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_5v0";
+ vin-supply = <&vcc_24v_reg>;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
- vdd_3v3_reg: regulator@102 {
- compatible = "regulator-fixed";
- reg = <102>;
- regulator-name = "vdd_3v3";
- vin-supply = <&vcc_24v_reg>;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
+ vdd_3v3_reg: regulator@102 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_3v3";
+ vin-supply = <&vcc_24v_reg>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
- vdd_1v8_reg: regulator@103 {
- compatible = "regulator-fixed";
- reg = <103>;
- regulator-name = "vdd_1v8";
- vin-supply = <&vdd_3v3_reg>;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
+ vdd_1v8_reg: regulator@103 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_1v8";
+ vin-supply = <&vdd_3v3_reg>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
};
};
diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts
index 5b26482a55b7..4bc87bc0c2a4 100644
--- a/arch/arm/boot/dts/tegra20-trimslice.dts
+++ b/arch/arm/boot/dts/tegra20-trimslice.dts
@@ -401,58 +401,47 @@ poweroff {
gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>;
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- hdmi_vdd_reg: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "avdd_hdmi";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
+ hdmi_vdd_reg: regulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "avdd_hdmi";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
- hdmi_pll_reg: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "avdd_hdmi_pll";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
+ hdmi_pll_reg: regulator@1 {
+ compatible = "regulator-fixed";
+ regulator-name = "avdd_hdmi_pll";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
- vbus_reg: regulator@2 {
- compatible = "regulator-fixed";
- reg = <2>;
- regulator-name = "usb1_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- gpio = <&gpio TEGRA_GPIO(V, 2) 0>;
- regulator-always-on;
- regulator-boot-on;
- };
+ vbus_reg: regulator@2 {
+ compatible = "regulator-fixed";
+ regulator-name = "usb1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&gpio TEGRA_GPIO(V, 2) 0>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
- pci_clk_reg: regulator@3 {
- compatible = "regulator-fixed";
- reg = <3>;
- regulator-name = "pci_clk";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
+ pci_clk_reg: regulator@3 {
+ compatible = "regulator-fixed";
+ regulator-name = "pci_clk";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
- pci_vdd_reg: regulator@4 {
- compatible = "regulator-fixed";
- reg = <4>;
- regulator-name = "pci_vdd";
- regulator-min-microvolt = <1050000>;
- regulator-max-microvolt = <1050000>;
- regulator-always-on;
- };
+ pci_vdd_reg: regulator@4 {
+ compatible = "regulator-fixed";
+ regulator-name = "pci_vdd";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-always-on;
};
sound {
diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts
index 59998d3708a1..ccc24674be03 100644
--- a/arch/arm/boot/dts/tegra20-ventana.dts
+++ b/arch/arm/boot/dts/tegra20-ventana.dts
@@ -613,58 +613,47 @@ panel: panel {
ddc-i2c-bus = <&lvds_ddc>;
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- vdd_5v0_reg: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "vdd_5v0";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- };
+ vdd_5v0_reg: regulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
- regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "vdd_1v5";
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <1500000>;
- gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
- };
+ regulator@1 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_1v5";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
+ };
- regulator@2 {
- compatible = "regulator-fixed";
- reg = <2>;
- regulator-name = "vdd_1v2";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
+ regulator@2 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_1v2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
- vdd_pnl_reg: regulator@3 {
- compatible = "regulator-fixed";
- reg = <3>;
- regulator-name = "vdd_pnl";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
+ vdd_pnl_reg: regulator@3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_pnl";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
- vdd_bl_reg: regulator@4 {
- compatible = "regulator-fixed";
- reg = <4>;
- regulator-name = "vdd_bl";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- gpio = <&gpio TEGRA_GPIO(W, 0) GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
+ vdd_bl_reg: regulator@4 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_bl";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ gpio = <&gpio TEGRA_GPIO(W, 0) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
};
sound {
diff --git a/arch/arm/boot/dts/tegra30-beaver.dts b/arch/arm/boot/dts/tegra30-beaver.dts
index ef3ea08f8d19..3211c61f956c 100644
--- a/arch/arm/boot/dts/tegra30-beaver.dts
+++ b/arch/arm/boot/dts/tegra30-beaver.dts
@@ -1984,118 +1984,103 @@ gpled2 {
};
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- vdd_5v_in_reg: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "vdd_5v_in";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- };
+ vdd_5v_in_reg: regulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_5v_in";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
- chargepump_5v_reg: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "chargepump_5v";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-boot-on;
- regulator-always-on;
- enable-active-high;
- gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
- };
+ chargepump_5v_reg: regulator@1 {
+ compatible = "regulator-fixed";
+ regulator-name = "chargepump_5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ enable-active-high;
+ gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
+ };
- ddr_reg: regulator@2 {
- compatible = "regulator-fixed";
- reg = <2>;
- regulator-name = "vdd_ddr";
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <1500000>;
- regulator-always-on;
- regulator-boot-on;
- enable-active-high;
- gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
- vin-supply = <&vdd_5v_in_reg>;
- };
+ ddr_reg: regulator@2 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_ddr";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
+ vin-supply = <&vdd_5v_in_reg>;
+ };
- vdd_5v_sata_reg: regulator@3 {
- compatible = "regulator-fixed";
- reg = <3>;
- regulator-name = "vdd_5v_sata";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- regulator-boot-on;
- enable-active-high;
- gpio = <&gpio TEGRA_GPIO(D, 6) GPIO_ACTIVE_HIGH>;
- vin-supply = <&vdd_5v_in_reg>;
- };
+ vdd_5v_sata_reg: regulator@3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_5v_sata";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&gpio TEGRA_GPIO(D, 6) GPIO_ACTIVE_HIGH>;
+ vin-supply = <&vdd_5v_in_reg>;
+ };
- usb1_vbus_reg: regulator@4 {
- compatible = "regulator-fixed";
- reg = <4>;
- regulator-name = "usb1_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- gpio = <&gpio TEGRA_GPIO(DD, 6) GPIO_ACTIVE_HIGH>;
- gpio-open-drain;
- vin-supply = <&vdd_5v_in_reg>;
- };
+ usb1_vbus_reg: regulator@4 {
+ compatible = "regulator-fixed";
+ regulator-name = "usb1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&gpio TEGRA_GPIO(DD, 6) GPIO_ACTIVE_HIGH>;
+ gpio-open-drain;
+ vin-supply = <&vdd_5v_in_reg>;
+ };
- usb3_vbus_reg: regulator@5 {
- compatible = "regulator-fixed";
- reg = <5>;
- regulator-name = "usb3_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- gpio = <&gpio TEGRA_GPIO(DD, 4) GPIO_ACTIVE_HIGH>;
- gpio-open-drain;
- vin-supply = <&vdd_5v_in_reg>;
- };
+ usb3_vbus_reg: regulator@5 {
+ compatible = "regulator-fixed";
+ regulator-name = "usb3_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&gpio TEGRA_GPIO(DD, 4) GPIO_ACTIVE_HIGH>;
+ gpio-open-drain;
+ vin-supply = <&vdd_5v_in_reg>;
+ };
- sys_3v3_reg: regulator@6 {
- compatible = "regulator-fixed";
- reg = <6>;
- regulator-name = "sys_3v3,vdd_3v3_alw";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
- enable-active-high;
- gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
- vin-supply = <&vdd_5v_in_reg>;
- };
+ sys_3v3_reg: regulator@6 {
+ compatible = "regulator-fixed";
+ regulator-name = "sys_3v3,vdd_3v3_alw";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+ vin-supply = <&vdd_5v_in_reg>;
+ };
- sys_3v3_pexs_reg: regulator@7 {
- compatible = "regulator-fixed";
- reg = <7>;
- regulator-name = "sys_3v3_pexs";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
- enable-active-high;
- gpio = <&gpio TEGRA_GPIO(L, 7) GPIO_ACTIVE_HIGH>;
- vin-supply = <&sys_3v3_reg>;
- };
+ sys_3v3_pexs_reg: regulator@7 {
+ compatible = "regulator-fixed";
+ regulator-name = "sys_3v3_pexs";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&gpio TEGRA_GPIO(L, 7) GPIO_ACTIVE_HIGH>;
+ vin-supply = <&sys_3v3_reg>;
+ };
- vdd_5v0_hdmi: regulator@8 {
- compatible = "regulator-fixed";
- reg = <8>;
- regulator-name = "+VDD_5V_HDMI";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&sys_3v3_reg>;
- };
+ vdd_5v0_hdmi: regulator@8 {
+ compatible = "regulator-fixed";
+ regulator-name = "+VDD_5V_HDMI";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&sys_3v3_reg>;
};
sound {
diff --git a/arch/arm/boot/dts/tegra30-cardhu-a02.dts b/arch/arm/boot/dts/tegra30-cardhu-a02.dts
index a02ec5082287..4899e05a0d9c 100644
--- a/arch/arm/boot/dts/tegra30-cardhu-a02.dts
+++ b/arch/arm/boot/dts/tegra30-cardhu-a02.dts
@@ -9,87 +9,75 @@ / {
model = "NVIDIA Tegra30 Cardhu A02 evaluation board";
compatible = "nvidia,cardhu-a02", "nvidia,cardhu", "nvidia,tegra30";
- sdhci@78000400 {
+ mmc@78000400 {
status = "okay";
power-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
bus-width = <4>;
keep-power-in-suspend;
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- ddr_reg: regulator@100 {
- compatible = "regulator-fixed";
- reg = <100>;
- regulator-name = "vdd_ddr";
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <1500000>;
- regulator-always-on;
- regulator-boot-on;
- enable-active-high;
- gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
- };
+ ddr_reg: regulator@100 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_ddr";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+ };
- sys_3v3_reg: regulator@101 {
- compatible = "regulator-fixed";
- reg = <101>;
- regulator-name = "sys_3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
- enable-active-high;
- gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
- };
+ sys_3v3_reg: regulator@101 {
+ compatible = "regulator-fixed";
+ regulator-name = "sys_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
+ };
- usb1_vbus_reg: regulator@102 {
- compatible = "regulator-fixed";
- reg = <102>;
- regulator-name = "usb1_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- gpio = <&gpio TEGRA_GPIO(I, 4) GPIO_ACTIVE_HIGH>;
- gpio-open-drain;
- vin-supply = <&vdd_5v0_reg>;
- };
+ usb1_vbus_reg: regulator@102 {
+ compatible = "regulator-fixed";
+ regulator-name = "usb1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&gpio TEGRA_GPIO(I, 4) GPIO_ACTIVE_HIGH>;
+ gpio-open-drain;
+ vin-supply = <&vdd_5v0_reg>;
+ };
- usb3_vbus_reg: regulator@103 {
- compatible = "regulator-fixed";
- reg = <103>;
- regulator-name = "usb3_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_HIGH>;
- gpio-open-drain;
- vin-supply = <&vdd_5v0_reg>;
- };
+ usb3_vbus_reg: regulator@103 {
+ compatible = "regulator-fixed";
+ regulator-name = "usb3_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_HIGH>;
+ gpio-open-drain;
+ vin-supply = <&vdd_5v0_reg>;
+ };
- vdd_5v0_reg: regulator@104 {
- compatible = "regulator-fixed";
- reg = <104>;
- regulator-name = "5v0";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
- };
+ vdd_5v0_reg: regulator@104 {
+ compatible = "regulator-fixed";
+ regulator-name = "5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
+ };
- vdd_bl_reg: regulator@105 {
- compatible = "regulator-fixed";
- reg = <105>;
- regulator-name = "vdd_bl";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- regulator-boot-on;
- enable-active-high;
- gpio = <&gpio TEGRA_GPIO(K, 3) GPIO_ACTIVE_HIGH>;
- };
+ vdd_bl_reg: regulator@105 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_bl";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&gpio TEGRA_GPIO(K, 3) GPIO_ACTIVE_HIGH>;
};
};
diff --git a/arch/arm/boot/dts/tegra30-cardhu-a04.dts b/arch/arm/boot/dts/tegra30-cardhu-a04.dts
index 9234988624ec..c1c0ca628af1 100644
--- a/arch/arm/boot/dts/tegra30-cardhu-a04.dts
+++ b/arch/arm/boot/dts/tegra30-cardhu-a04.dts
@@ -11,99 +11,86 @@ / {
model = "NVIDIA Tegra30 Cardhu A04 (A05, A06, A07) evaluation board";
compatible = "nvidia,cardhu-a04", "nvidia,cardhu", "nvidia,tegra30";
- sdhci@78000400 {
+ mmc@78000400 {
status = "okay";
power-gpios = <&gpio TEGRA_GPIO(D, 3) GPIO_ACTIVE_HIGH>;
bus-width = <4>;
keep-power-in-suspend;
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- ddr_reg: regulator@100 {
- compatible = "regulator-fixed";
- regulator-name = "ddr";
- reg = <100>;
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <1500000>;
- regulator-always-on;
- regulator-boot-on;
- enable-active-high;
- gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
- };
+ ddr_reg: regulator@100 {
+ compatible = "regulator-fixed";
+ regulator-name = "ddr";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
+ };
- sys_3v3_reg: regulator@101 {
- compatible = "regulator-fixed";
- reg = <101>;
- regulator-name = "sys_3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
- enable-active-high;
- gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
- };
+ sys_3v3_reg: regulator@101 {
+ compatible = "regulator-fixed";
+ regulator-name = "sys_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+ };
- usb1_vbus_reg: regulator@102 {
- compatible = "regulator-fixed";
- reg = <102>;
- regulator-name = "usb1_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- gpio = <&gpio TEGRA_GPIO(DD, 6) GPIO_ACTIVE_HIGH>;
- gpio-open-drain;
- vin-supply = <&vdd_5v0_reg>;
- };
+ usb1_vbus_reg: regulator@102 {
+ compatible = "regulator-fixed";
+ regulator-name = "usb1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&gpio TEGRA_GPIO(DD, 6) GPIO_ACTIVE_HIGH>;
+ gpio-open-drain;
+ vin-supply = <&vdd_5v0_reg>;
+ };
- usb3_vbus_reg: regulator@103 {
- compatible = "regulator-fixed";
- reg = <103>;
- regulator-name = "usb3_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- gpio = <&gpio TEGRA_GPIO(DD, 4) GPIO_ACTIVE_HIGH>;
- gpio-open-drain;
- vin-supply = <&vdd_5v0_reg>;
- };
+ usb3_vbus_reg: regulator@103 {
+ compatible = "regulator-fixed";
+ regulator-name = "usb3_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&gpio TEGRA_GPIO(DD, 4) GPIO_ACTIVE_HIGH>;
+ gpio-open-drain;
+ vin-supply = <&vdd_5v0_reg>;
+ };
- vdd_5v0_reg: regulator@104 {
- compatible = "regulator-fixed";
- reg = <104>;
- regulator-name = "5v0";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- gpio = <&pmic 8 GPIO_ACTIVE_HIGH>;
- };
+ vdd_5v0_reg: regulator@104 {
+ compatible = "regulator-fixed";
+ regulator-name = "5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&pmic 8 GPIO_ACTIVE_HIGH>;
+ };
- vdd_bl_reg: regulator@105 {
- compatible = "regulator-fixed";
- reg = <105>;
- regulator-name = "vdd_bl";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- regulator-boot-on;
- enable-active-high;
- gpio = <&gpio TEGRA_GPIO(DD, 2) GPIO_ACTIVE_HIGH>;
- };
+ vdd_bl_reg: regulator@105 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_bl";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&gpio TEGRA_GPIO(DD, 2) GPIO_ACTIVE_HIGH>;
+ };
- vdd_bl2_reg: regulator@106 {
- compatible = "regulator-fixed";
- reg = <106>;
- regulator-name = "vdd_bl2";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- regulator-boot-on;
- enable-active-high;
- gpio = <&gpio TEGRA_GPIO(DD, 0) GPIO_ACTIVE_HIGH>;
- };
+ vdd_bl2_reg: regulator@106 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_bl2";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&gpio TEGRA_GPIO(DD, 0) GPIO_ACTIVE_HIGH>;
};
i2c@7000d000 {
diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi
index c166967b6c3f..c8dc3b6ab2f6 100644
--- a/arch/arm/boot/dts/tegra30-cardhu.dtsi
+++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi
@@ -434,158 +434,139 @@ panel: panel {
backlight = <&backlight>;
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- vdd_ac_bat_reg: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "vdd_ac_bat";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- };
+ vdd_ac_bat_reg: regulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_ac_bat";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
- cam_1v8_reg: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "cam_1v8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- enable-active-high;
- gpio = <&gpio TEGRA_GPIO(BB, 4) GPIO_ACTIVE_HIGH>;
- vin-supply = <&vio_reg>;
- };
+ cam_1v8_reg: regulator@1 {
+ compatible = "regulator-fixed";
+ regulator-name = "cam_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ enable-active-high;
+ gpio = <&gpio TEGRA_GPIO(BB, 4) GPIO_ACTIVE_HIGH>;
+ vin-supply = <&vio_reg>;
+ };
- cp_5v_reg: regulator@2 {
- compatible = "regulator-fixed";
- reg = <2>;
- regulator-name = "cp_5v";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-boot-on;
- regulator-always-on;
- enable-active-high;
- gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
- };
+ cp_5v_reg: regulator@2 {
+ compatible = "regulator-fixed";
+ regulator-name = "cp_5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ enable-active-high;
+ gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
+ };
- emmc_3v3_reg: regulator@3 {
- compatible = "regulator-fixed";
- reg = <3>;
- regulator-name = "emmc_3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
- enable-active-high;
- gpio = <&gpio TEGRA_GPIO(D, 1) GPIO_ACTIVE_HIGH>;
- vin-supply = <&sys_3v3_reg>;
- };
+ emmc_3v3_reg: regulator@3 {
+ compatible = "regulator-fixed";
+ regulator-name = "emmc_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&gpio TEGRA_GPIO(D, 1) GPIO_ACTIVE_HIGH>;
+ vin-supply = <&sys_3v3_reg>;
+ };
- modem_3v3_reg: regulator@4 {
- compatible = "regulator-fixed";
- reg = <4>;
- regulator-name = "modem_3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- enable-active-high;
- gpio = <&gpio TEGRA_GPIO(D, 6) GPIO_ACTIVE_HIGH>;
- };
+ modem_3v3_reg: regulator@4 {
+ compatible = "regulator-fixed";
+ regulator-name = "modem_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ gpio = <&gpio TEGRA_GPIO(D, 6) GPIO_ACTIVE_HIGH>;
+ };
- pex_hvdd_3v3_reg: regulator@5 {
- compatible = "regulator-fixed";
- reg = <5>;
- regulator-name = "pex_hvdd_3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- enable-active-high;
- gpio = <&gpio TEGRA_GPIO(L, 7) GPIO_ACTIVE_HIGH>;
- vin-supply = <&sys_3v3_reg>;
- };
+ pex_hvdd_3v3_reg: regulator@5 {
+ compatible = "regulator-fixed";
+ regulator-name = "pex_hvdd_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ gpio = <&gpio TEGRA_GPIO(L, 7) GPIO_ACTIVE_HIGH>;
+ vin-supply = <&sys_3v3_reg>;
+ };
- vdd_cam1_ldo_reg: regulator@6 {
- compatible = "regulator-fixed";
- reg = <6>;
- regulator-name = "vdd_cam1_ldo";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- enable-active-high;
- gpio = <&gpio TEGRA_GPIO(R, 6) GPIO_ACTIVE_HIGH>;
- vin-supply = <&sys_3v3_reg>;
- };
+ vdd_cam1_ldo_reg: regulator@6 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_cam1_ldo";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ enable-active-high;
+ gpio = <&gpio TEGRA_GPIO(R, 6) GPIO_ACTIVE_HIGH>;
+ vin-supply = <&sys_3v3_reg>;
+ };
- vdd_cam2_ldo_reg: regulator@7 {
- compatible = "regulator-fixed";
- reg = <7>;
- regulator-name = "vdd_cam2_ldo";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- enable-active-high;
- gpio = <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>;
- vin-supply = <&sys_3v3_reg>;
- };
+ vdd_cam2_ldo_reg: regulator@7 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_cam2_ldo";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ enable-active-high;
+ gpio = <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>;
+ vin-supply = <&sys_3v3_reg>;
+ };
- vdd_cam3_ldo_reg: regulator@8 {
- compatible = "regulator-fixed";
- reg = <8>;
- regulator-name = "vdd_cam3_ldo";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- enable-active-high;
- gpio = <&gpio TEGRA_GPIO(S, 0) GPIO_ACTIVE_HIGH>;
- vin-supply = <&sys_3v3_reg>;
- };
+ vdd_cam3_ldo_reg: regulator@8 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_cam3_ldo";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ gpio = <&gpio TEGRA_GPIO(S, 0) GPIO_ACTIVE_HIGH>;
+ vin-supply = <&sys_3v3_reg>;
+ };
- vdd_com_reg: regulator@9 {
- compatible = "regulator-fixed";
- reg = <9>;
- regulator-name = "vdd_com";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
- enable-active-high;
- gpio = <&gpio TEGRA_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
- vin-supply = <&sys_3v3_reg>;
- };
+ vdd_com_reg: regulator@9 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_com";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&gpio TEGRA_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+ vin-supply = <&sys_3v3_reg>;
+ };
- vdd_fuse_3v3_reg: regulator@10 {
- compatible = "regulator-fixed";
- reg = <10>;
- regulator-name = "vdd_fuse_3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- enable-active-high;
- gpio = <&gpio TEGRA_GPIO(L, 6) GPIO_ACTIVE_HIGH>;
- vin-supply = <&sys_3v3_reg>;
- };
+ vdd_fuse_3v3_reg: regulator@10 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_fuse_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ gpio = <&gpio TEGRA_GPIO(L, 6) GPIO_ACTIVE_HIGH>;
+ vin-supply = <&sys_3v3_reg>;
+ };
- vdd_pnl1_reg: regulator@11 {
- compatible = "regulator-fixed";
- reg = <11>;
- regulator-name = "vdd_pnl1";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
- enable-active-high;
- gpio = <&gpio TEGRA_GPIO(L, 4) GPIO_ACTIVE_HIGH>;
- vin-supply = <&sys_3v3_reg>;
- };
+ vdd_pnl1_reg: regulator@11 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_pnl1";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&gpio TEGRA_GPIO(L, 4) GPIO_ACTIVE_HIGH>;
+ vin-supply = <&sys_3v3_reg>;
+ };
- vdd_vid_reg: regulator@12 {
- compatible = "regulator-fixed";
- reg = <12>;
- regulator-name = "vddio_vid";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- gpio = <&gpio TEGRA_GPIO(T, 0) GPIO_ACTIVE_HIGH>;
- gpio-open-drain;
- vin-supply = <&vdd_5v0_reg>;
- };
+ vdd_vid_reg: regulator@12 {
+ compatible = "regulator-fixed";
+ regulator-name = "vddio_vid";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&gpio TEGRA_GPIO(T, 0) GPIO_ACTIVE_HIGH>;
+ gpio-open-drain;
+ vin-supply = <&vdd_5v0_reg>;
};
sound {
--
2.24.1
next prev parent reply other threads:[~2020-06-16 13:51 UTC|newest]
Thread overview: 88+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-16 13:51 [PATCH 00/73] ARM: tegra: Various fixes for DT schema validation Thierry Reding
[not found] ` <20200616135238.3001888-1-thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2020-06-16 13:51 ` [PATCH 01/73] ARM: tegra: Add missing clock-names for SDHCI on Tegra114 Thierry Reding
2020-06-16 13:51 ` [PATCH 02/73] ARM: tegra: Remove simple clocks bus Thierry Reding
[not found] ` <20200616135238.3001888-3-thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2020-06-16 19:06 ` Jon Hunter
[not found] ` <74f8be81-216b-b69b-4517-c90d5f7d578a-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2020-06-17 14:21 ` Thierry Reding
2020-06-16 13:51 ` Thierry Reding [this message]
[not found] ` <20200616135238.3001888-4-thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2020-06-16 19:24 ` [PATCH 03/73] ARM: tegra: Remove simple regulators bus Jon Hunter
[not found] ` <cf8eb9d4-70d5-400f-ecc8-2139c25563a9-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2020-06-17 14:22 ` Thierry Reding
2020-06-16 13:51 ` [PATCH 04/73] ARM: tegra: Remove battery-name property Thierry Reding
2020-06-16 13:51 ` [PATCH 05/73] ARM: tegra: roth: Use the correct DSI/CSI supply Thierry Reding
2020-06-16 13:51 ` [PATCH 06/73] ARM: tegra: tn7: " Thierry Reding
2020-06-16 13:51 ` [PATCH 07/73] ARM: tegra: Do not mark host1x as simple bus Thierry Reding
2020-06-16 13:51 ` [PATCH 08/73] ARM: tegra: Add missing host1x properties Thierry Reding
2020-06-16 13:51 ` [PATCH 09/73] ARM: tegra: gr2d is not backwards-compatible Thierry Reding
[not found] ` <20200616135238.3001888-10-thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2020-06-17 16:21 ` Dmitry Osipenko
[not found] ` <9f56be9a-1a79-07cc-371f-f3abcd20701e-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2020-06-22 15:22 ` Thierry Reding
2020-06-22 15:29 ` Dmitry Osipenko
2020-06-16 13:51 ` [PATCH 10/73] ARM: tegra: gr3d " Thierry Reding
2020-06-16 13:51 ` [PATCH 11/73] ARM: tegra: The Tegra114 DC " Thierry Reding
2020-06-16 13:51 ` [PATCH 12/73] ARM: tegra: Drop display controller parent clocks on Tegra114 Thierry Reding
[not found] ` <20200616135238.3001888-13-thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2020-06-24 16:19 ` Dmitry Osipenko
[not found] ` <0bc2ec0e-f863-207a-d61b-058503598139-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2020-06-25 7:37 ` Thierry Reding
2020-06-25 14:18 ` Dmitry Osipenko
2020-06-16 13:51 ` [PATCH 13/73] ARM: tegra: Rename sdhci nodes to mmc Thierry Reding
2020-06-16 13:51 ` [PATCH 14/73] ARM: tegra: Tegra114 SDHCI is not backwards-compatible Thierry Reding
2020-06-16 13:51 ` [PATCH 15/73] ARM: tegra: Add missing #phy-cells property to USB PHYs Thierry Reding
2020-06-16 13:51 ` [PATCH 16/73] ARM: tegra: Add missing #sound-dai-cells property to codecs Thierry Reding
2020-06-16 13:51 ` [PATCH 17/73] ARM: tegra: Name GPIO hog nodes consistently Thierry Reding
2020-06-16 13:51 ` [PATCH 18/73] ARM: tegra: Use standard name for Ethernet devices Thierry Reding
2020-06-16 13:51 ` [PATCH 19/73] ARM: tegra: Use proper tuple notation Thierry Reding
2020-06-16 13:51 ` [PATCH 20/73] ARM: tegra: Add micro-USB A/B port on Jetson TK1 Thierry Reding
2020-06-16 13:51 ` [PATCH 21/73] ARM: tegra: Add missing panel power supplies on Nyan Thierry Reding
2020-06-16 13:51 ` [PATCH 22/73] ARM: tegra: Add #reset-cells to Tegra124 memory controller Thierry Reding
2020-06-16 13:51 ` [PATCH 23/73] ARM: tegra: Fix order of XUSB controller clocks Thierry Reding
2020-06-16 13:51 ` [PATCH 24/73] ARM: tegra: Add missing clock-names for SDHCI controllers Thierry Reding
2020-06-16 13:51 ` [PATCH 25/73] ARM: tegra: Use proper unit-addresses for OPPs Thierry Reding
2020-06-16 13:51 ` [PATCH 26/73] ARM: tegra: medcom-wide: Remove extra panel power supply Thierry Reding
2020-06-16 13:51 ` [PATCH 27/73] ARM: tegra: Use numeric unit-addresses Thierry Reding
2020-06-16 13:51 ` [PATCH 28/73] ARM: tegra: Use standard names for LED nodes Thierry Reding
2020-06-16 13:51 ` [PATCH 29/73] ARM: tegra: seaboard: Use standard battery bindings Thierry Reding
2020-06-16 13:51 ` [PATCH 30/73] ARM: tegra: Use standard names for SRAM nodes Thierry Reding
2020-06-16 13:51 ` [PATCH 31/73] ARM: tegra: Add parent clock to DSI output Thierry Reding
2020-06-16 13:51 ` [PATCH 32/73] ARM: tegra: Remove spurious comma from node name Thierry Reding
2020-06-16 13:51 ` [PATCH 33/73] ARM: tegra: The Tegra30 DC is not backwards-compatible Thierry Reding
2020-06-16 13:51 ` [PATCH 34/73] ARM: tegra: The Tegra30 SDHCI " Thierry Reding
2020-06-16 13:52 ` [PATCH 35/73] arm64: tegra: Add missing #phy-cells property on Jetson TX2 Thierry Reding
2020-06-16 13:52 ` [PATCH 36/73] arm64: tegra: Add missing #phy-cells property on Jetson AGX Xavier Thierry Reding
2020-06-16 13:52 ` [PATCH 37/73] arm64: tegra: Fix #address-cells/#size-cells for SRAM on Tegra186 Thierry Reding
2020-06-16 13:52 ` [PATCH 38/73] arm64: tegra: Use standard notation for interrupts Thierry Reding
2020-06-16 13:52 ` [PATCH 39/73] arm64: tegra: Remove extra compatible for Tegra194 SDHCI Thierry Reding
2020-06-16 13:52 ` [PATCH 40/73] arm64: tegra: Remove extra compatible for Tegra210 SDHCI Thierry Reding
2020-06-16 13:52 ` [PATCH 41/73] arm64: tegra: Describe interconnect paths on Tegra186 Thierry Reding
2020-06-16 13:52 ` [PATCH 42/73] arm64: tegra: Describe interconnect paths on Tegra194 Thierry Reding
2020-06-16 13:52 ` [PATCH 43/73] arm64: tegra: Add interrupt for Tegra194 memory controller Thierry Reding
2020-06-16 13:52 ` [PATCH 44/73] arm64: tegra: Add Tegra132 compatible string for host1x Thierry Reding
2020-06-16 13:52 ` [PATCH 45/73] arm64: tegra: Add interrupt-names " Thierry Reding
2020-06-16 13:52 ` [PATCH 46/73] arm64: tegra: Remove parent clock from display controllers Thierry Reding
2020-06-16 13:52 ` [PATCH 47/73] arm64: tegra: Fixup I/O and PLL supply names for HDMI/DP Thierry Reding
2020-06-16 13:52 ` [PATCH 48/73] arm64: tegra: Add unit-address to memory node Thierry Reding
2020-06-16 13:52 ` [PATCH 49/73] arm64: tegra: Rename sdhci nodes to mmc Thierry Reding
2020-06-16 13:52 ` [PATCH 50/73] arm64: tegra: Enable XUSB on Norrin Thierry Reding
2020-06-16 13:52 ` [PATCH 51/73] arm64: tegra: Remove undocumented battery-name property Thierry Reding
2020-06-16 13:52 ` [PATCH 52/73] arm64: tegra: Remove simple clocks bus Thierry Reding
[not found] ` <20200616135238.3001888-53-thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2020-06-30 11:13 ` Jon Hunter
[not found] ` <46e907c8-6fd5-73ff-9ca4-bcf3ee19d716-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2020-06-30 11:16 ` Jon Hunter
2020-06-16 13:52 ` [PATCH 53/73] arm64: tegra: Remove simple regulators bus Thierry Reding
[not found] ` <20200616135238.3001888-54-thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2020-06-30 11:11 ` Jon Hunter
[not found] ` <fe583ea8-6a66-f78e-b926-5d0ed775361f-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2020-06-30 11:16 ` Jon Hunter
2020-06-16 13:52 ` [PATCH 54/73] arm64: tegra: norrin: Add missing panel power supply Thierry Reding
2020-06-16 13:52 ` [PATCH 55/73] arm64: tegra: Use proper tuple notation Thierry Reding
2020-06-16 13:52 ` [PATCH 56/73] arm64: tegra: Do not mark host1x as simple bus Thierry Reding
2020-06-16 13:52 ` [PATCH 57/73] arm64: tegra: Use sor0_out clock on Tegra132 Thierry Reding
2020-06-16 13:52 ` [PATCH 58/73] arm64: tegra: Tegra132 EMC is not compatible with Tegra124 Thierry Reding
2020-06-16 13:52 ` [PATCH 59/73] arm64: tegra: Add missing #phy-cells property to USB PHYs Thierry Reding
2020-06-16 13:52 ` [PATCH 60/73] arm64: tegra: Remove unneeded power supplies Thierry Reding
2020-06-16 13:52 ` [PATCH 61/73] arm64: tegra: Update USB connector nodes Thierry Reding
2020-06-16 13:52 ` [PATCH 62/73] arm64: tegra: Use standard EEPROM properties Thierry Reding
2020-06-16 13:52 ` [PATCH 63/73] arm64: tegra: Remove XUSB pad controller interrupt from XUSB node Thierry Reding
2020-06-16 13:52 ` [PATCH 64/73] arm64: tegra: Fix {clock,reset}-names ordering Thierry Reding
2020-06-16 13:52 ` [PATCH 65/73] arm64: tegra: Do not mark display hub as simple bus Thierry Reding
2020-06-16 13:52 ` [PATCH 66/73] arm64: tegra: Use standard names for SRAM nodes Thierry Reding
2020-06-16 13:52 ` [PATCH 67/73] arm64: tegra: Remove unused interrupts from Tegra194 AON GPIO Thierry Reding
2020-06-16 13:52 ` [PATCH 68/73] arm64: tegra: Fix indentation in Tegra194 device tree Thierry Reding
2020-06-16 13:52 ` [PATCH 69/73] arm64: tegra: Rename agic -> interrupt-controller Thierry Reding
2020-06-16 13:52 ` [PATCH 70/73] arm64: tegra: Various fixes for PMICs Thierry Reding
2020-06-16 13:52 ` [PATCH 71/73] arm64: tegra: Sort nodes by unit-address on Jetson Nano Thierry Reding
2020-06-16 13:52 ` [PATCH 72/73] arm64: tegra: Rename cbb@0 to bus@0 on Tegra194 Thierry Reding
2020-06-16 13:52 ` [PATCH 73/73] arm64: tegra: Fix order of XUSB controller clocks Thierry Reding
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200616135238.3001888-4-thierry.reding@gmail.com \
--to=thierry.reding-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
--cc=jonathanh-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).