From: Dmitry Osipenko <digetx@gmail.com>
To: Thierry Reding <thierry.reding@gmail.com>,
Jonathan Hunter <jonathanh@nvidia.com>,
Laxman Dewangan <ldewangan@nvidia.com>,
Wolfram Sang <wsa@the-dreams.de>
Cc: linux-i2c@vger.kernel.org, linux-tegra@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v2 03/17] i2c: tegra: Clean up messages in the code
Date: Wed, 2 Sep 2020 00:10:48 +0300 [thread overview]
Message-ID: <20200901211102.11072-4-digetx@gmail.com> (raw)
In-Reply-To: <20200901211102.11072-1-digetx@gmail.com>
Use lowercase and consistent wording for all messages in the code.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
drivers/i2c/busses/i2c-tegra.c | 65 ++++++++++++++++------------------
1 file changed, 31 insertions(+), 34 deletions(-)
diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index 9bd91b6f32f4..0d358bc12973 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -377,7 +377,7 @@ static int tegra_i2c_dma_submit(struct tegra_i2c_dev *i2c_dev, size_t len)
enum dma_transfer_direction dir;
struct dma_chan *chan;
- dev_dbg(i2c_dev->dev, "starting DMA for length: %zu\n", len);
+ dev_dbg(i2c_dev->dev, "starting dma for length: %zu\n", len);
reinit_completion(&i2c_dev->dma_complete);
dir = i2c_dev->msg_read ? DMA_DEV_TO_MEM : DMA_MEM_TO_DEV;
chan = i2c_dev->msg_read ? i2c_dev->rx_dma_chan : i2c_dev->tx_dma_chan;
@@ -385,7 +385,7 @@ static int tegra_i2c_dma_submit(struct tegra_i2c_dev *i2c_dev, size_t len)
len, dir, DMA_PREP_INTERRUPT |
DMA_CTRL_ACK);
if (!dma_desc) {
- dev_err(i2c_dev->dev, "failed to get DMA descriptor\n");
+ dev_err(i2c_dev->dev, "failed to get dma descriptor\n");
return -EINVAL;
}
@@ -427,7 +427,7 @@ static int tegra_i2c_init_dma(struct tegra_i2c_dev *i2c_dev)
return 0;
if (!IS_ENABLED(CONFIG_TEGRA20_APB_DMA)) {
- dev_dbg(i2c_dev->dev, "Support for APB DMA not enabled!\n");
+ dev_dbg(i2c_dev->dev, "dma support not enabled\n");
return 0;
}
@@ -450,7 +450,7 @@ static int tegra_i2c_init_dma(struct tegra_i2c_dev *i2c_dev)
dma_buf = dma_alloc_coherent(i2c_dev->dev, i2c_dev->dma_buf_size,
&dma_phys, GFP_KERNEL | __GFP_NOWARN);
if (!dma_buf) {
- dev_err(i2c_dev->dev, "failed to allocate the DMA buffer\n");
+ dev_err(i2c_dev->dev, "failed to allocate dma buffer\n");
err = -ENOMEM;
goto err_out;
}
@@ -462,8 +462,8 @@ static int tegra_i2c_init_dma(struct tegra_i2c_dev *i2c_dev)
err_out:
tegra_i2c_release_dma(i2c_dev);
if (err != -EPROBE_DEFER) {
- dev_err(i2c_dev->dev, "cannot use DMA: %d\n", err);
- dev_err(i2c_dev->dev, "falling back to PIO\n");
+ dev_err(i2c_dev->dev, "cannot use dma: %d\n", err);
+ dev_err(i2c_dev->dev, "falling back to pio\n");
return 0;
}
@@ -672,8 +672,7 @@ static int __maybe_unused tegra_i2c_runtime_resume(struct device *dev)
ret = clk_enable(i2c_dev->fast_clk);
if (ret < 0) {
- dev_err(i2c_dev->dev,
- "Enabling fast clk failed, err %d\n", ret);
+ dev_err(dev, "failed to enable fast clock: %d\n", ret);
return ret;
}
@@ -685,8 +684,7 @@ static int __maybe_unused tegra_i2c_runtime_resume(struct device *dev)
ret = clk_enable(i2c_dev->div_clk);
if (ret < 0) {
- dev_err(i2c_dev->dev,
- "Enabling div clk failed, err %d\n", ret);
+ dev_err(dev, "failed to enable div clock: %d\n", ret);
goto disable_slow_clk;
}
@@ -747,8 +745,7 @@ static int tegra_i2c_wait_for_config_load(struct tegra_i2c_dev *i2c_dev)
I2C_CONFIG_LOAD_TIMEOUT);
if (err) {
- dev_warn(i2c_dev->dev,
- "timeout waiting for config load\n");
+ dev_err(i2c_dev->dev, "failed to load config\n");
return err;
}
}
@@ -850,7 +847,7 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev, bool clk_reinit)
i2c_dev->bus_clk_rate * clk_multiplier);
if (err) {
dev_err(i2c_dev->dev,
- "failed changing clock rate: %d\n", err);
+ "failed to set div-clk rate: %d\n", err);
return err;
}
}
@@ -1052,8 +1049,7 @@ static void tegra_i2c_config_fifo_trig(struct tegra_i2c_dev *i2c_dev,
slv_config.device_fc = true;
ret = dmaengine_slave_config(chan, &slv_config);
if (ret < 0) {
- dev_err(i2c_dev->dev, "DMA slave config failed: %d\n",
- ret);
+ dev_err(i2c_dev->dev, "dma config failed: %d\n", ret);
dev_err(i2c_dev->dev, "falling back to PIO\n");
tegra_i2c_release_dma(i2c_dev);
i2c_dev->is_curr_dma_xfer = false;
@@ -1163,8 +1159,7 @@ static int tegra_i2c_issue_bus_clear(struct i2c_adapter *adap)
reg = i2c_readl(i2c_dev, I2C_BUS_CLEAR_STATUS);
if (!(reg & I2C_BC_STATUS)) {
- dev_err(i2c_dev->dev,
- "un-recovered arbitration lost\n");
+ dev_err(i2c_dev->dev, "un-recovered arbitration lost\n");
return -EIO;
}
@@ -1221,8 +1216,7 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
err = tegra_i2c_dma_submit(i2c_dev, xfer_size);
if (err < 0) {
dev_err(i2c_dev->dev,
- "starting RX DMA failed, err %d\n",
- err);
+ "starting rx dma failed: %d\n", err);
return err;
}
@@ -1281,8 +1275,7 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
err = tegra_i2c_dma_submit(i2c_dev, xfer_size);
if (err < 0) {
dev_err(i2c_dev->dev,
- "starting TX DMA failed, err %d\n",
- err);
+ "starting tx dma failed: %d\n", err);
return err;
}
} else {
@@ -1321,7 +1314,7 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
i2c_dev->tx_dma_chan);
if (!time_left && !completion_done(&i2c_dev->dma_complete)) {
- dev_err(i2c_dev->dev, "DMA transfer timeout\n");
+ dev_err(i2c_dev->dev, "dma transfer timeout\n");
tegra_i2c_init(i2c_dev, true);
return -ETIMEDOUT;
}
@@ -1676,7 +1669,7 @@ static int tegra_i2c_probe(struct platform_device *pdev)
res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (!res) {
- dev_err(&pdev->dev, "no irq resource\n");
+ dev_err(dev, "no irq resource\n");
return -EINVAL;
}
irq = res->start;
@@ -1684,7 +1677,8 @@ static int tegra_i2c_probe(struct platform_device *pdev)
div_clk = devm_clk_get(&pdev->dev, "div-clk");
if (IS_ERR(div_clk)) {
if (PTR_ERR(div_clk) != -EPROBE_DEFER)
- dev_err(&pdev->dev, "missing controller clock\n");
+ dev_err(&pdev->dev, "failed to get div-clk: %ld\n",
+ PTR_ERR(div_clk));
return PTR_ERR(div_clk);
}
@@ -1705,7 +1699,9 @@ static int tegra_i2c_probe(struct platform_device *pdev)
i2c_dev->rst = devm_reset_control_get_exclusive(&pdev->dev, "i2c");
if (IS_ERR(i2c_dev->rst)) {
- dev_err(&pdev->dev, "missing controller reset\n");
+ dev_err(dev, "failed to get reset control: %pe\n",
+ i2c_dev->rst);
+
return PTR_ERR(i2c_dev->rst);
}
@@ -1725,7 +1721,9 @@ static int tegra_i2c_probe(struct platform_device *pdev)
if (!i2c_dev->hw->has_single_clk_source) {
fast_clk = devm_clk_get(&pdev->dev, "fast-clk");
if (IS_ERR(fast_clk)) {
- dev_err(&pdev->dev, "missing fast clock\n");
+ dev_err(dev, "failed to get fast clock\n: %ld\n",
+ PTR_ERR(fast_clk));
+
return PTR_ERR(fast_clk);
}
i2c_dev->fast_clk = fast_clk;
@@ -1746,7 +1744,7 @@ static int tegra_i2c_probe(struct platform_device *pdev)
ret = clk_prepare(i2c_dev->fast_clk);
if (ret < 0) {
- dev_err(i2c_dev->dev, "Clock prepare failed %d\n", ret);
+ dev_err(dev, "failed to prepare fast clock: %d\n", ret);
return ret;
}
@@ -1770,7 +1768,7 @@ static int tegra_i2c_probe(struct platform_device *pdev)
ret = clk_prepare(i2c_dev->div_clk);
if (ret < 0) {
- dev_err(i2c_dev->dev, "Clock prepare failed %d\n", ret);
+ dev_err(dev, "failed to prepare div-clk: %d\n", ret);
goto unprepare_slow_clk;
}
@@ -1787,13 +1785,13 @@ static int tegra_i2c_probe(struct platform_device *pdev)
if (!pm_runtime_enabled(&pdev->dev)) {
ret = tegra_i2c_runtime_resume(&pdev->dev);
if (ret < 0) {
- dev_err(&pdev->dev, "runtime resume failed\n");
+ dev_err(dev, "runtime resume failed\n");
goto unprepare_div_clk;
}
} else {
ret = pm_runtime_get_sync(i2c_dev->dev);
if (ret < 0) {
- dev_err(&pdev->dev, "runtime resume failed\n");
+ dev_err(dev, "runtime resume failed\n");
goto disable_rpm;
}
}
@@ -1801,8 +1799,7 @@ static int tegra_i2c_probe(struct platform_device *pdev)
if (i2c_dev->is_multimaster_mode) {
ret = clk_enable(i2c_dev->div_clk);
if (ret < 0) {
- dev_err(i2c_dev->dev, "div_clk enable failed %d\n",
- ret);
+ dev_err(dev, "failed to enable div-clk: %d\n", ret);
goto put_rpm;
}
}
@@ -1816,7 +1813,7 @@ static int tegra_i2c_probe(struct platform_device *pdev)
ret = tegra_i2c_init(i2c_dev, false);
if (ret) {
- dev_err(&pdev->dev, "Failed to initialize i2c controller\n");
+ dev_err(dev, "failed to initialize i2c controller\n");
goto release_dma;
}
@@ -1825,7 +1822,7 @@ static int tegra_i2c_probe(struct platform_device *pdev)
ret = devm_request_irq(&pdev->dev, i2c_dev->irq, tegra_i2c_isr,
IRQF_NO_SUSPEND, dev_name(&pdev->dev), i2c_dev);
if (ret) {
- dev_err(&pdev->dev, "Failed to request irq %i\n", i2c_dev->irq);
+ dev_err(dev, "failed to request irq %i\n", i2c_dev->irq);
goto release_dma;
}
--
2.27.0
next prev parent reply other threads:[~2020-09-01 21:13 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-01 21:10 [PATCH v2 00/17] Improvements for Tegra I2C driver Dmitry Osipenko
2020-09-01 21:10 ` [PATCH v2 01/17] i2c: tegra: Make tegra_i2c_flush_fifos() usable in atomic transfer Dmitry Osipenko
2020-09-01 21:10 ` [PATCH v2 02/17] i2c: tegra: Add missing newline before returns Dmitry Osipenko
2020-09-01 21:10 ` Dmitry Osipenko [this message]
[not found] ` <CAHp75Vf9ETJMibQGe4Nx7n4703GtgO1XBsE1yGwsk3TaSPTDHw@mail.gmail.com>
2020-09-01 21:37 ` [PATCH v2 03/17] i2c: tegra: Clean up messages in the code Dmitry Osipenko
2020-09-01 21:10 ` [PATCH v2 04/17] i2c: tegra: Don't ignore tegra_i2c_flush_fifos() error Dmitry Osipenko
2020-09-01 21:10 ` [PATCH v2 05/17] i2c: tegra: Use reset_control_reset() Dmitry Osipenko
2020-09-01 21:10 ` [PATCH v2 06/17] i2c: tegra: Improve formatting of function variables Dmitry Osipenko
2020-09-01 21:10 ` [PATCH v2 07/17] i2c: tegra: Use dev_err_probe() Dmitry Osipenko
2020-09-01 21:10 ` [PATCH v2 08/17] i2c: tegra: Runtime PM always available on Tegra Dmitry Osipenko
2020-09-01 21:10 ` [PATCH v2 09/17] i2c: tegra: Clean up probe function Dmitry Osipenko
2020-09-01 21:10 ` [PATCH v2 10/17] i2c: tegra: Drop '_timeout' from wait/poll function names Dmitry Osipenko
2020-09-01 21:10 ` [PATCH v2 11/17] i2c: tegra: Remove likely/unlikely from the code Dmitry Osipenko
2020-09-01 21:10 ` [PATCH v2 12/17] i2c: tegra: Factor out error recovery from tegra_i2c_xfer_msg() Dmitry Osipenko
2020-09-01 21:10 ` [PATCH v2 13/17] i2c: tegra: Check errors for both positive and negative values Dmitry Osipenko
2020-09-01 21:10 ` [PATCH v2 14/17] i2c: tegra: Improve coding style of tegra_i2c_wait_for_config_load() Dmitry Osipenko
2020-09-01 21:11 ` [PATCH v2 15/17] i2c: tegra: Remove unnecessary whitespaces and newlines Dmitry Osipenko
2020-09-01 21:11 ` [PATCH v2 16/17] i2c: tegra: Rename variable in tegra_i2c_issue_bus_clear() Dmitry Osipenko
2020-09-01 21:11 ` [PATCH v2 17/17] i2c: tegra: Improve driver module description Dmitry Osipenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200901211102.11072-4-digetx@gmail.com \
--to=digetx@gmail.com \
--cc=jonathanh@nvidia.com \
--cc=ldewangan@nvidia.com \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=thierry.reding@gmail.com \
--cc=wsa@the-dreams.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).