Re: [PATCH v3 2/3] iommu/tegra-smmu: Rework .probe_device and .attach_dev

[Nicolin Chen <nicoleotsuka@gmail.com>]

On Wed, Sep 30, 2020 at 05:31:31PM +0200, Thierry Reding wrote:
> On Wed, Sep 30, 2020 at 01:42:57AM -0700, Nicolin Chen wrote:
> > Previously the driver relies on bus_set_iommu() in .probe() to call
> > in .probe_device() function so each client can poll iommus property
> > in DTB to configure fwspec via tegra_smmu_configure(). According to
> > the comments in .probe(), this is a bit of a hack. And this doesn't
> > work for a client that doesn't exist in DTB, PCI device for example.
> > 
> > Actually when a device/client gets probed, the of_iommu_configure()
> > will call in .probe_device() function again, with a prepared fwspec
> > from of_iommu_configure() that reads the SWGROUP id in DTB as we do
> > in tegra-smmu driver.
> > 
> > Additionally, as a new helper devm_tegra_get_memory_controller() is
> > introduced, there's no need to poll the iommus property in order to
> > get mc->smmu pointers or SWGROUP id.
> > 
> > This patch reworks .probe_device() and .attach_dev() by doing:
> > 1) Using fwspec to get swgroup id in .attach_dev/.dettach_dev()
> > 2) Removing DT polling code, tegra_smmu_find/tegra_smmu_configure()
> > 3) Calling devm_tegra_get_memory_controller() in .probe_device()
> > 4) Also dropping the hack in .probe() that's no longer needed.
> > 
> > Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
[...]
> >  static struct iommu_device *tegra_smmu_probe_device(struct device *dev)
> >  {
> > -	struct device_node *np = dev->of_node;
> > -	struct tegra_smmu *smmu = NULL;
> > -	struct of_phandle_args args;
> > -	unsigned int index = 0;
> > -	int err;
> > -
> > -	while (of_parse_phandle_with_args(np, "iommus", "#iommu-cells", index,
> > -					  &args) == 0) {
> > -		smmu = tegra_smmu_find(args.np);
> > -		if (smmu) {
> > -			err = tegra_smmu_configure(smmu, dev, &args);
> > -			of_node_put(args.np);
> > -
> > -			if (err < 0)
> > -				return ERR_PTR(err);
> > -
> > -			/*
> > -			 * Only a single IOMMU master interface is currently
> > -			 * supported by the Linux kernel, so abort after the
> > -			 * first match.
> > -			 */
> > -			dev_iommu_priv_set(dev, smmu);
> > -
> > -			break;
> > -		}
> > +	struct tegra_mc *mc = devm_tegra_get_memory_controller(dev);
> > +	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
> 
> It looks to me like the only reason why you need this new global API is
> because PCI devices may not have a device tree node with a phandle to
> the IOMMU. However, SMMU support for PCI will only be enabled if the
> root complex has an iommus property, right? In that case, can't we
> simply do something like this:
> 
> 	if (dev_is_pci(dev))
> 		np = find_host_bridge(dev)->of_node;
> 	else
> 		np = dev->of_node;
> 
> ? I'm not sure exactly what find_host_bridge() is called, but I'm pretty
> sure that exists.
> 
> Once we have that we can still iterate over the iommus property and do
> not need to rely on this global variable.

I agree that it'd work. But I was hoping to simplify the code
here if it's possible. Looks like we have an argument on this
so I will choose to go with your suggestion above for now.

> > -		of_node_put(args.np);
> > -		index++;
> > -	}
> > +	/* An invalid mc pointer means mc and smmu drivers are not ready */
> > +	if (IS_ERR(mc))
> > +		return ERR_PTR(-EPROBE_DEFER);
> >  
> > -	if (!smmu)
> > +	/*
> > +	 * IOMMU core allows -ENODEV return to carry on. So bypass any call
> > +	 * from bus_set_iommu() during tegra_smmu_probe(), as a device will
> > +	 * call in again via of_iommu_configure when fwspec is prepared.
> > +	 */
> > +	if (!mc->smmu || !fwspec || fwspec->ops != &tegra_smmu_ops)
> >  		return ERR_PTR(-ENODEV);
> >  
> > -	return &smmu->iommu;
> > +	dev_iommu_priv_set(dev, mc->smmu);
> > +
> > +	return &mc->smmu->iommu;
> >  }
> >  
> >  static void tegra_smmu_release_device(struct device *dev)
> > @@ -1089,16 +1027,6 @@ struct tegra_smmu *tegra_smmu_probe(struct device *dev,
> >  	if (!smmu)
> >  		return ERR_PTR(-ENOMEM);
> >  
> > -	/*
> > -	 * This is a bit of a hack. Ideally we'd want to simply return this
> > -	 * value. However the IOMMU registration process will attempt to add
> > -	 * all devices to the IOMMU when bus_set_iommu() is called. In order
> > -	 * not to rely on global variables to track the IOMMU instance, we
> > -	 * set it here so that it can be looked up from the .probe_device()
> > -	 * callback via the IOMMU device's .drvdata field.
> > -	 */
> > -	mc->smmu = smmu;
> 
> I don't think this is going to work. I distinctly remember putting this
> here because we needed access to this before ->probe_device() had been
> called for any of the devices.

Do you remember which exact part of code needs to access mc->smmu
before ->probe_device() is called?

What I understood is that IOMMU core didn't allow ERR_PTR(-ENODEV)
return value from ->probe_device(), previously ->add_device(), to
carry on when you added this code/driver:
    commit 8918465163171322c77a19d5258a95f56d89d2e4
    Author: Thierry Reding <treding@nvidia.com>
    Date:   Wed Apr 16 09:24:44 2014 +0200
        memory: Add NVIDIA Tegra memory controller support

..until the core had a change one year later:
    commit 38667f18900afe172a4fe44279b132b4140f920f
    Author: Joerg Roedel <jroedel@suse.de>
    Date:   Mon Jun 29 10:16:08 2015 +0200
        iommu: Ignore -ENODEV errors from add_device call-back

As my commit message of this change states, ->probe_device() will
be called in from both bus_set_iommu() and really_probe() of each
device through of_iommu_configure() -- the later one initializes
an fwspec by polling the iommus property in the IOMMU core, same
as what we do here in tegra-smmu. If this works, we can probably
drop the hack here and get rid of tegra_smmu_configure().