public inbox for linux-tegra@vger.kernel.org
 help / color / mirror / Atom feed
From: Krishna Yarlagadda <kyarlagadda@nvidia.com>
To: <robh+dt@kernel.org>, <broonie@kernel.org>, <peterhuewe@gmx.de>,
	<jgg@ziepe.ca>, <jarkko@kernel.org>,
	<krzysztof.kozlowski+dt@linaro.org>, <linux-spi@vger.kernel.org>,
	<linux-tegra@vger.kernel.org>, <linux-integrity@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>
Cc: <thierry.reding@gmail.com>, <jonathanh@nvidia.com>,
	<skomatineni@nvidia.com>, <ldewangan@nvidia.com>,
	Krishna Yarlagadda <kyarlagadda@nvidia.com>
Subject: [Patch V6 3/3] spi: tegra210-quad: Enable TPM wait polling
Date: Mon, 27 Feb 2023 22:51:08 +0530	[thread overview]
Message-ID: <20230227172108.8206-4-kyarlagadda@nvidia.com> (raw)
In-Reply-To: <20230227172108.8206-1-kyarlagadda@nvidia.com>

Trusted Platform Module requires flow control. As defined in TPM
interface specification, client would drive MISO line at same cycle as
last address bit on MOSI.
Tegra241 QSPI controller has TPM wait state detection feature which is
enabled for TPM client devices reported in SPI device mode bits.
Set half duplex flag for TPM device to detect and send entire message
to controller in one shot.

Signed-off-by: Krishna Yarlagadda <kyarlagadda@nvidia.com>
---
 drivers/spi/spi-tegra210-quad.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/spi/spi-tegra210-quad.c b/drivers/spi/spi-tegra210-quad.c
index b967576b6c96..e1165584a20a 100644
--- a/drivers/spi/spi-tegra210-quad.c
+++ b/drivers/spi/spi-tegra210-quad.c
@@ -142,6 +142,7 @@
 
 #define QSPI_GLOBAL_CONFIG			0X1a4
 #define QSPI_CMB_SEQ_EN				BIT(0)
+#define QSPI_TPM_WAIT_POLL_EN			BIT(1)
 
 #define QSPI_CMB_SEQ_ADDR			0x1a8
 #define QSPI_ADDRESS_VALUE_SET(X)		(((x) & 0xFFFF) << 0)
@@ -164,6 +165,7 @@
 struct tegra_qspi_soc_data {
 	bool has_dma;
 	bool cmb_xfer_capable;
+	bool support_tpm;
 	unsigned int cs_count;
 };
 
@@ -1065,6 +1067,12 @@ static int tegra_qspi_combined_seq_xfer(struct tegra_qspi *tqspi,
 
 	/* Enable Combined sequence mode */
 	val = tegra_qspi_readl(tqspi, QSPI_GLOBAL_CONFIG);
+	if (spi->mode & SPI_TPM_HW_FLOW) {
+		if (tqspi->soc_data->support_tpm)
+			val |= QSPI_TPM_WAIT_POLL_EN;
+		else
+			return -EIO;
+	}
 	val |= QSPI_CMB_SEQ_EN;
 	tegra_qspi_writel(tqspi, val, QSPI_GLOBAL_CONFIG);
 	/* Process individual transfer list */
@@ -1192,6 +1200,8 @@ static int tegra_qspi_non_combined_seq_xfer(struct tegra_qspi *tqspi,
 	/* Disable Combined sequence mode */
 	val = tegra_qspi_readl(tqspi, QSPI_GLOBAL_CONFIG);
 	val &= ~QSPI_CMB_SEQ_EN;
+	if (tqspi->soc_data->support_tpm)
+		val &= ~QSPI_TPM_WAIT_POLL_EN;
 	tegra_qspi_writel(tqspi, val, QSPI_GLOBAL_CONFIG);
 	list_for_each_entry(transfer, &msg->transfers, transfer_list) {
 		struct spi_transfer *xfer = transfer;
@@ -1450,24 +1460,28 @@ static irqreturn_t tegra_qspi_isr_thread(int irq, void *context_data)
 static struct tegra_qspi_soc_data tegra210_qspi_soc_data = {
 	.has_dma = true,
 	.cmb_xfer_capable = false,
+	.support_tpm = false,
 	.cs_count = 1,
 };
 
 static struct tegra_qspi_soc_data tegra186_qspi_soc_data = {
 	.has_dma = true,
 	.cmb_xfer_capable = true,
+	.support_tpm = false,
 	.cs_count = 1,
 };
 
 static struct tegra_qspi_soc_data tegra234_qspi_soc_data = {
 	.has_dma = false,
 	.cmb_xfer_capable = true,
+	.support_tpm = true,
 	.cs_count = 1,
 };
 
 static struct tegra_qspi_soc_data tegra241_qspi_soc_data = {
 	.has_dma = false,
 	.cmb_xfer_capable = true,
+	.support_tpm = true,
 	.cs_count = 4,
 };
 
-- 
2.17.1


  parent reply	other threads:[~2023-02-27 17:22 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-02-27 17:21 [Patch V6 0/3] Tegra TPM driver with HW flow control Krishna Yarlagadda
2023-02-27 17:21 ` [Patch V6 1/3] spi: Add TPM HW flow flag Krishna Yarlagadda
2023-03-01 13:34   ` Thierry Reding
2023-03-01 15:27     ` Krishna Yarlagadda
2023-02-27 17:21 ` [Patch V6 2/3] tpm_tis-spi: Support hardware wait polling Krishna Yarlagadda
2023-03-01 13:37   ` Thierry Reding
2023-02-27 17:21 ` Krishna Yarlagadda [this message]
2023-03-01 13:39   ` [Patch V6 3/3] spi: tegra210-quad: Enable TPM " Thierry Reding
2023-03-01 13:41   ` Thierry Reding
2023-03-01 13:51   ` Jon Hunter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230227172108.8206-4-kyarlagadda@nvidia.com \
    --to=kyarlagadda@nvidia.com \
    --cc=broonie@kernel.org \
    --cc=jarkko@kernel.org \
    --cc=jgg@ziepe.ca \
    --cc=jonathanh@nvidia.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=ldewangan@nvidia.com \
    --cc=linux-integrity@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=peterhuewe@gmx.de \
    --cc=robh+dt@kernel.org \
    --cc=skomatineni@nvidia.com \
    --cc=thierry.reding@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox