Re: [PATCH] i2c: tegra: Fix i2c-tegra DMA config option processing

[Andi Shyti <andi.shyti@kernel.org>]

Hi Parker,

On Tue, Aug 08, 2023 at 12:42:28PM +0000, Parker Newman wrote:
> On 2023-08-06 10:21, Akhil R wrote:
> >>
> >> BTW...
> >>
> >> On Thu, Aug 03, 2023 at 05:10:02PM +0000, Parker Newman wrote:
> >>>
> >>
> >> you have a blank line here.
> >>
> >>> This patch fixes the Tegra DMA config option processing in the
> >>> i2c-tegra driver.
> >>>
> >>> Tegra processors prior to Tegra186 used APB DMA for I2C requiring
> >>> CONFIG_TEGRA20_APB_DMA=y while Tegra186 and later use GPC DMA
> >>> requiring CONFIG_TEGRA186_GPC_DMA=y.
> >>>
> >>> The check for if the processor uses APB DMA is inverted and so the
> >>> wrong DMA config options are checked.
> >>>
> >>> This means if CONFIG_TEGRA20_APB_DMA=y but
> >> CONFIG_TEGRA186_GPC_DMA=n
> >>> with a Tegra186 or later processor the driver will incorrectly think
> >>> DMA is enabled and attempt to request DMA channels that will never be
> >>> availible, leaving the driver in a perpetual EPROBE_DEFER state.
> >>>
> >>> Signed-off-by: Parker Newman <pnewman@connecttech.com>
> >>
> >> As this is a fix you also need to add
> >>
> >> Fixes: 48cb6356fae1 ("i2c: tegra: Add GPCDMA support")
> >> Cc: Akhil R <akhilrajeev@nvidia.com>
> >> Cc: <stable@vger.kernel.org> # v6.1+
> >>
> >> Cc'eing Akhil as well for his opinion on this.
> > The fix looks valid to me. Must have been a typo there.
> > 
> > Regards,
> > Akhil
> > 
> Yes it appears to be a simple typo and if you have both DMA Config options 
> set the bug would get missed. 
> 
> I am new to the Linux mailing list, should I send a new message to 
> stable@vger.kernel.org or CC them on this one?

First of all... welcome to the Linux mailing list :)

No need to resend, I can add it... I was hoping for an official
ack, but as that's not coming, I will ack it

Acked-by: Andi Shyti <andi.shyti@kernel.org> 

Thank you Parker and wishing to see more patches from you ;)

Andi