From: Dara Stotland <dstotland@nvidia.com>
To: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Thierry Reding <thierry.reding@gmail.com>,
Jonathan Hunter <jonathanh@nvidia.com>,
Brad Griffis <bgriffis@nvidia.com>, <devicetree@vger.kernel.org>,
<linux-tegra@vger.kernel.org>
Cc: Dara Stotland <dstotland@nvidia.com>
Subject: [PATCH 1/7] arm64: tegra: Combine AGX Orin board files
Date: Fri, 23 Aug 2024 21:49:51 +0000 [thread overview]
Message-ID: <20240823214957.771297-2-dstotland@nvidia.com> (raw)
In-Reply-To: <20240823214957.771297-1-dstotland@nvidia.com>
The current AGX Orin structure has both a top-level module+board
file as well as a board file. Most of the data in the board-file
is closely related to the module itself. The benefit of this
extra file is outweighed by the additional complexity. Merge
the board file into the module+board file for simplicity.
Signed-off-by: Dara Stotland <dstotland@nvidia.com>
---
.../nvidia/tegra234-p3737-0000+p3701-0000.dts | 82 ++++++++++++++++-
.../boot/dts/nvidia/tegra234-p3737-0000.dtsi | 90 -------------------
2 files changed, 80 insertions(+), 92 deletions(-)
delete mode 100644 arch/arm64/boot/dts/nvidia/tegra234-p3737-0000.dtsi
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
index 69db584253da..21feaf434439 100644
--- a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
@@ -3,9 +3,9 @@
#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/sound/rt5640.h>
#include "tegra234-p3701-0000.dtsi"
-#include "tegra234-p3737-0000.dtsi"
/ {
model = "NVIDIA Jetson AGX Orin Developer Kit";
@@ -22,23 +22,90 @@
};
bus@0 {
+ aconnect@2900000 {
+ ahub@2900800 {
+ i2s@2901000 {
+ ports {
+ port@1 {
+ endpoint {
+ dai-format = "i2s";
+ remote-endpoint = <&rt5640_ep>;
+ };
+ };
+ };
+ };
+ };
+ };
+
serial@3100000 {
compatible = "nvidia,tegra194-hsuart";
reset-names = "serial";
status = "okay";
};
+ i2c@3160000 {
+ status = "okay";
+
+ eeprom@56 {
+ compatible = "atmel,24c02";
+ reg = <0x56>;
+
+ label = "system";
+ vcc-supply = <&vdd_1v8_sys>;
+ address-width = <8>;
+ pagesize = <8>;
+ size = <256>;
+ read-only;
+ };
+ };
+
serial@31d0000 {
current-speed = <115200>;
status = "okay";
};
+ i2c@31e0000 {
+ status = "okay";
+
+ audio-codec@1c {
+ compatible = "realtek,rt5640";
+ reg = <0x1c>;
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA234_MAIN_GPIO(AC, 5) GPIO_ACTIVE_HIGH>;
+ clocks = <&bpmp TEGRA234_CLK_AUD_MCLK>;
+ clock-names = "mclk";
+ realtek,dmic1-data-pin = <RT5640_DMIC1_DATA_PIN_NONE>;
+ realtek,dmic2-data-pin = <RT5640_DMIC2_DATA_PIN_NONE>;
+ realtek,jack-detect-source = <RT5640_JD_SRC_HDA_HEADER>;
+ sound-name-prefix = "CVB-RT";
+
+ port {
+ rt5640_ep: endpoint {
+ remote-endpoint = <&i2s1_dap>;
+ mclk-fs = <256>;
+ };
+ };
+ };
+ };
+
+ pwm@3280000 {
+ status = "okay";
+ };
+
pwm@32a0000 {
assigned-clocks = <&bpmp TEGRA234_CLK_PWM3>;
assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>;
status = "okay";
};
+ pwm@32c0000 {
+ status = "okay";
+ };
+
+ pwm@32f0000 {
+ status = "okay";
+ };
+
hda@3510000 {
nvidia,model = "NVIDIA Jetson AGX Orin HDA";
status = "okay";
@@ -341,8 +408,11 @@
};
};
- pwm-fan {
+ fan: pwm-fan {
+ compatible = "pwm-fan";
cooling-levels = <66 215 255>;
+ pwms = <&pwm3 0 45334>;
+ #cooling-cells = <2>;
};
serial {
@@ -444,4 +514,12 @@
};
};
};
+
+ vdd_1v8_sys: regulator-vdd-1v8-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_1V8_SYS";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
};
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000.dtsi
deleted file mode 100644
index eb79e80a9852..000000000000
--- a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000.dtsi
+++ /dev/null
@@ -1,90 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-
-#include <dt-bindings/sound/rt5640.h>
-
-/ {
- compatible = "nvidia,p3737-0000";
-
- bus@0 {
- aconnect@2900000 {
- ahub@2900800 {
- i2s@2901000 {
- ports {
- port@1 {
- endpoint {
- dai-format = "i2s";
- remote-endpoint = <&rt5640_ep>;
- };
- };
- };
- };
- };
- };
-
- i2c@3160000 {
- status = "okay";
-
- eeprom@56 {
- compatible = "atmel,24c02";
- reg = <0x56>;
-
- label = "system";
- vcc-supply = <&vdd_1v8_sys>;
- address-width = <8>;
- pagesize = <8>;
- size = <256>;
- read-only;
- };
- };
-
- i2c@31e0000 {
- status = "okay";
-
- audio-codec@1c {
- compatible = "realtek,rt5640";
- reg = <0x1c>;
- interrupt-parent = <&gpio>;
- interrupts = <TEGRA234_MAIN_GPIO(AC, 5) GPIO_ACTIVE_HIGH>;
- clocks = <&bpmp TEGRA234_CLK_AUD_MCLK>;
- clock-names = "mclk";
- realtek,dmic1-data-pin = <RT5640_DMIC1_DATA_PIN_NONE>;
- realtek,dmic2-data-pin = <RT5640_DMIC2_DATA_PIN_NONE>;
- realtek,jack-detect-source = <RT5640_JD_SRC_HDA_HEADER>;
- sound-name-prefix = "CVB-RT";
-
- port {
- rt5640_ep: endpoint {
- remote-endpoint = <&i2s1_dap>;
- mclk-fs = <256>;
- };
- };
- };
- };
-
- pwm@3280000 {
- status = "okay";
- };
-
- pwm@32c0000 {
- status = "okay";
- };
-
- pwm@32f0000 {
- status = "okay";
- };
- };
-
- fan: pwm-fan {
- compatible = "pwm-fan";
- pwms = <&pwm3 0 45334>;
- #cooling-cells = <2>;
- };
-
- vdd_1v8_sys: regulator-vdd-1v8-sys {
- compatible = "regulator-fixed";
- regulator-name = "VDD_1V8_SYS";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-};
--
2.17.1
next prev parent reply other threads:[~2024-08-23 21:50 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-23 21:49 [PATCH 0/7] Tegra234 AGX Orin DTS Updates Dara Stotland
2024-08-23 21:49 ` Dara Stotland [this message]
2024-08-23 21:49 ` [PATCH 2/7] arm64: tegra: Combine IGX Orin board files Dara Stotland
2024-08-23 21:49 ` [PATCH 3/7] arm64: tegra: Move AGX Orin nodes to correct location Dara Stotland
2024-08-23 21:49 ` [PATCH 4/7] arm64: tegra: Move padctl supply nodes to AGX Orin module Dara Stotland
2024-08-23 21:49 ` [PATCH 5/7] arm64: tegra: Move BPMP " Dara Stotland
2024-08-23 21:49 ` [PATCH 6/7] arm64: tegra: Add thermal nodes to AGX Orin SKU8 Dara Stotland
2024-08-23 21:49 ` [PATCH 7/7] arm64: tegra: Create SKU8 AGX Orin board file Dara Stotland
2024-08-24 8:02 ` Krzysztof Kozlowski
2024-08-24 14:56 ` Brad Griffis
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240823214957.771297-2-dstotland@nvidia.com \
--to=dstotland@nvidia.com \
--cc=bgriffis@nvidia.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jonathanh@nvidia.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-tegra@vger.kernel.org \
--cc=robh@kernel.org \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox