[PATCH] arm64: tegra: Enable PWM fan on the Jetson TX1 Devkit

[Aaron Kling via B4 Relay <devnull+webgeek1234.gmail.com@kernel.org>]

From: Aaron Kling <webgeek1234@gmail.com>

This is based on 6f78a94, which enabled added the fan and thermal zones
for the Jetson Nano Devkit. The fan and thermal characteristics of the
two devkits are similar, so usng the same configuration.

Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
---
 arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi | 60 ++++++++++++++++++++++++++
 1 file changed, 60 insertions(+)

diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
index 83ed6ac2a8d8f403fb588edce83dc401065c162f..bc02f2eb14bcbd99627c58b398bbf43061c8110b 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
@@ -1623,6 +1623,14 @@ key-volume-up {
 		};
 	};
 
+	fan: pwm-fan {
+		compatible = "pwm-fan";
+		pwms = <&pwm 3 45334>;
+
+		cooling-levels = <0 64 128 255>;
+		#cooling-cells = <2>;
+	};
+
 	vdd_sys_mux: regulator-vdd-sys-mux {
 		compatible = "regulator-fixed";
 		regulator-name = "VDD_SYS_MUX";
@@ -1778,4 +1786,56 @@ vdd_usb_vbus_otg: regulator-vdd-usb-vbus-otg {
 		enable-active-high;
 		vin-supply = <&vdd_5v0_sys>;
 	};
+
+	thermal-zones {
+		cpu-thermal {
+			trips {
+				cpu_trip_critical: critical {
+					temperature = <96500>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+
+				cpu_trip_hot: hot {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu_trip_active: active {
+					temperature = <50000>;
+					hysteresis = <2000>;
+					type = "active";
+				};
+
+				cpu_trip_passive: passive {
+					temperature = <30000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+			};
+
+			cooling-maps {
+				cpu-critical {
+					cooling-device = <&fan 3 3>;
+					trip = <&cpu_trip_critical>;
+				};
+
+				cpu-hot {
+					cooling-device = <&fan 2 2>;
+					trip = <&cpu_trip_hot>;
+				};
+
+				cpu-active {
+					cooling-device = <&fan 1 1>;
+					trip = <&cpu_trip_active>;
+				};
+
+				cpu-passive {
+					cooling-device = <&fan 0 0>;
+					trip = <&cpu_trip_passive>;
+				};
+			};
+		};
+	};
 };

---
base-commit: 9c32cda43eb78f78c73aee4aa344b777714e259b
change-id: 20250420-tx1-therm-9fb3c30fa43f

Best regards,
-- 
Aaron Kling <webgeek1234@gmail.com>