* [PATCH v5 0/3] Support building tegra124-cpufreq as a module
@ 2025-07-02 7:46 Aaron Kling via B4 Relay
2025-07-02 7:46 ` [PATCH v5 1/3] cpufreq: Export disable_cpufreq() Aaron Kling via B4 Relay
` (2 more replies)
0 siblings, 3 replies; 7+ messages in thread
From: Aaron Kling via B4 Relay @ 2025-07-02 7:46 UTC (permalink / raw)
To: Rafael J. Wysocki, Viresh Kumar, Thierry Reding, Jonathan Hunter
Cc: linux-pm, linux-kernel, linux-tegra, Aaron Kling
This adds remove and exit routines that were not previously needed when
this was only available builtin.
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
---
Changes in v5:
- Add register helper function to cpufreq-dt for kernel users to use to
establish a depmod dependency
- Drop patch that removes use of disable_cpufreq and re-add the patch to
export said function
- Link to v4: https://lore.kernel.org/r/20250508-tegra124-cpufreq-v4-0-d142bcbd0234@gmail.com
Changes in v4:
- Move clock puts to remove instead of exit
- Link to v3: https://lore.kernel.org/r/20250421-tegra124-cpufreq-v3-0-95eaba968467@gmail.com
Changes in v3:
- In patch 1, set cpufreq_dt_pdev to an error after unregister on fail
to prevent a potential double unregister on remove
- In patch 2, clean up clocks on exit
- Link to v2: https://lore.kernel.org/r/20250421-tegra124-cpufreq-v2-0-2f148cefa418@gmail.com
Changes in v2:
- Replace patch 1 with a patch to not use the unexported function
- Update patch 2 to add remove and exit routines
- Link to v1: https://lore.kernel.org/r/20250420-tegra124-cpufreq-v1-0-0a47fe126091@gmail.com
---
Aaron Kling (3):
cpufreq: Export disable_cpufreq()
cpufreq: dt: Add register helper
cpufreq: tegra124: Allow building as a module
drivers/cpufreq/Kconfig.arm | 2 +-
drivers/cpufreq/cpufreq-dt.c | 11 ++++++++++
drivers/cpufreq/cpufreq-dt.h | 2 ++
drivers/cpufreq/cpufreq.c | 1 +
drivers/cpufreq/tegra124-cpufreq.c | 44 +++++++++++++++++++++++++++++---------
5 files changed, 49 insertions(+), 11 deletions(-)
---
base-commit: 91e5bfe317d8f8471fbaa3e70cf66cae1314a516
change-id: 20250401-tegra124-cpufreq-fd944fdce62c
Best regards,
--
Aaron Kling <webgeek1234@gmail.com>
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH v5 1/3] cpufreq: Export disable_cpufreq()
2025-07-02 7:46 [PATCH v5 0/3] Support building tegra124-cpufreq as a module Aaron Kling via B4 Relay
@ 2025-07-02 7:46 ` Aaron Kling via B4 Relay
2025-07-02 7:46 ` [PATCH v5 2/3] cpufreq: dt: Add register helper Aaron Kling via B4 Relay
2025-07-02 7:46 ` [PATCH v5 3/3] cpufreq: tegra124: Allow building as a module Aaron Kling via B4 Relay
2 siblings, 0 replies; 7+ messages in thread
From: Aaron Kling via B4 Relay @ 2025-07-02 7:46 UTC (permalink / raw)
To: Rafael J. Wysocki, Viresh Kumar, Thierry Reding, Jonathan Hunter
Cc: linux-pm, linux-kernel, linux-tegra, Aaron Kling
From: Aaron Kling <webgeek1234@gmail.com>
This is used by the tegra124-cpufreq driver.
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
---
drivers/cpufreq/cpufreq.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 0cf5a320bb5e864709b259249fb1af8bfbc0b04b..78cddc78ee98630f99ccc332c64c94f437297177 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -109,6 +109,7 @@ void disable_cpufreq(void)
{
off = 1;
}
+EXPORT_SYMBOL_GPL(disable_cpufreq);
static DEFINE_MUTEX(cpufreq_governor_mutex);
bool have_governor_per_policy(void)
--
2.50.0
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH v5 2/3] cpufreq: dt: Add register helper
2025-07-02 7:46 [PATCH v5 0/3] Support building tegra124-cpufreq as a module Aaron Kling via B4 Relay
2025-07-02 7:46 ` [PATCH v5 1/3] cpufreq: Export disable_cpufreq() Aaron Kling via B4 Relay
@ 2025-07-02 7:46 ` Aaron Kling via B4 Relay
2025-07-02 7:46 ` [PATCH v5 3/3] cpufreq: tegra124: Allow building as a module Aaron Kling via B4 Relay
2 siblings, 0 replies; 7+ messages in thread
From: Aaron Kling via B4 Relay @ 2025-07-02 7:46 UTC (permalink / raw)
To: Rafael J. Wysocki, Viresh Kumar, Thierry Reding, Jonathan Hunter
Cc: linux-pm, linux-kernel, linux-tegra, Aaron Kling
From: Aaron Kling <webgeek1234@gmail.com>
Cpufreq-dt currently exports no functions. This means that drivers that
are based on cpufreq-dt have no way of establishing a depmod dependency
on it. This helper allows that link.
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
---
drivers/cpufreq/cpufreq-dt.c | 11 +++++++++++
drivers/cpufreq/cpufreq-dt.h | 2 ++
2 files changed, 13 insertions(+)
diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c
index e80dd982a3e23f6e678d691daba2d8bfda28d93c..506437489b4db241a7a6259274ae84e688772e66 100644
--- a/drivers/cpufreq/cpufreq-dt.c
+++ b/drivers/cpufreq/cpufreq-dt.c
@@ -329,6 +329,17 @@ static struct platform_driver dt_cpufreq_platdrv = {
};
module_platform_driver(dt_cpufreq_platdrv);
+struct platform_device *cpufreq_dt_pdev_register(struct device *dev)
+{
+ struct platform_device_info cpufreq_dt_devinfo = {};
+
+ cpufreq_dt_devinfo.name = "cpufreq-dt";
+ cpufreq_dt_devinfo.parent = dev;
+
+ return platform_device_register_full(&cpufreq_dt_devinfo);
+}
+EXPORT_SYMBOL_GPL(cpufreq_dt_pdev_register);
+
MODULE_ALIAS("platform:cpufreq-dt");
MODULE_AUTHOR("Viresh Kumar <viresh.kumar@linaro.org>");
MODULE_AUTHOR("Shawn Guo <shawn.guo@linaro.org>");
diff --git a/drivers/cpufreq/cpufreq-dt.h b/drivers/cpufreq/cpufreq-dt.h
index 28c8af7ec5ef3ad0aa94f43ad9129600ca094329..fc1889aeb4f1f15fa7c46c2380021bbf40b62f11 100644
--- a/drivers/cpufreq/cpufreq-dt.h
+++ b/drivers/cpufreq/cpufreq-dt.h
@@ -22,4 +22,6 @@ struct cpufreq_dt_platform_data {
int (*resume)(struct cpufreq_policy *policy);
};
+struct platform_device *cpufreq_dt_pdev_register(struct device *dev);
+
#endif /* __CPUFREQ_DT_H__ */
--
2.50.0
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH v5 3/3] cpufreq: tegra124: Allow building as a module
2025-07-02 7:46 [PATCH v5 0/3] Support building tegra124-cpufreq as a module Aaron Kling via B4 Relay
2025-07-02 7:46 ` [PATCH v5 1/3] cpufreq: Export disable_cpufreq() Aaron Kling via B4 Relay
2025-07-02 7:46 ` [PATCH v5 2/3] cpufreq: dt: Add register helper Aaron Kling via B4 Relay
@ 2025-07-02 7:46 ` Aaron Kling via B4 Relay
2025-07-02 8:12 ` Viresh Kumar
2025-07-04 11:53 ` Jon Hunter
2 siblings, 2 replies; 7+ messages in thread
From: Aaron Kling via B4 Relay @ 2025-07-02 7:46 UTC (permalink / raw)
To: Rafael J. Wysocki, Viresh Kumar, Thierry Reding, Jonathan Hunter
Cc: linux-pm, linux-kernel, linux-tegra, Aaron Kling
From: Aaron Kling <webgeek1234@gmail.com>
This requires three changes:
* Using the cpufreq-dt register helper to establish a hard dependency
for depmod to track
* Adding a remove routine to remove the cpufreq-dt device
* Adding a exit routine to handle cleaning up the driver
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
---
drivers/cpufreq/Kconfig.arm | 2 +-
drivers/cpufreq/tegra124-cpufreq.c | 44 +++++++++++++++++++++++++++++---------
2 files changed, 35 insertions(+), 11 deletions(-)
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index 4f9cb943d945c244eb2b29f543d14df6cac4e5d4..625f6fbdaaf5fd774e3b0bb996eb7ce980da41ee 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -238,7 +238,7 @@ config ARM_TEGRA20_CPUFREQ
This adds the CPUFreq driver support for Tegra20/30 SOCs.
config ARM_TEGRA124_CPUFREQ
- bool "Tegra124 CPUFreq support"
+ tristate "Tegra124 CPUFreq support"
depends on ARCH_TEGRA || COMPILE_TEST
depends on CPUFREQ_DT
default y
diff --git a/drivers/cpufreq/tegra124-cpufreq.c b/drivers/cpufreq/tegra124-cpufreq.c
index 514146d98bca2d8aa59980a14dff3487cd8045f6..ebce62be9a9c17724d50dadeea1bb2ec81538421 100644
--- a/drivers/cpufreq/tegra124-cpufreq.c
+++ b/drivers/cpufreq/tegra124-cpufreq.c
@@ -16,6 +16,10 @@
#include <linux/pm_opp.h>
#include <linux/types.h>
+#include "cpufreq-dt.h"
+
+static struct platform_device *platform_device;
+
struct tegra124_cpufreq_priv {
struct clk *cpu_clk;
struct clk *pllp_clk;
@@ -55,7 +59,6 @@ static int tegra124_cpufreq_probe(struct platform_device *pdev)
struct device_node *np __free(device_node) = of_cpu_device_node_get(0);
struct tegra124_cpufreq_priv *priv;
struct device *cpu_dev;
- struct platform_device_info cpufreq_dt_devinfo = {};
int ret;
if (!np)
@@ -95,11 +98,7 @@ static int tegra124_cpufreq_probe(struct platform_device *pdev)
if (ret)
goto out_put_pllp_clk;
- cpufreq_dt_devinfo.name = "cpufreq-dt";
- cpufreq_dt_devinfo.parent = &pdev->dev;
-
- priv->cpufreq_dt_pdev =
- platform_device_register_full(&cpufreq_dt_devinfo);
+ priv->cpufreq_dt_pdev = cpufreq_dt_pdev_register(&pdev->dev);
if (IS_ERR(priv->cpufreq_dt_pdev)) {
ret = PTR_ERR(priv->cpufreq_dt_pdev);
goto out_put_pllp_clk;
@@ -173,6 +172,21 @@ static int __maybe_unused tegra124_cpufreq_resume(struct device *dev)
return err;
}
+static void tegra124_cpufreq_remove(struct platform_device *pdev)
+{
+ struct tegra124_cpufreq_priv *priv = dev_get_drvdata(&pdev->dev);
+
+ if (!IS_ERR(priv->cpufreq_dt_pdev)) {
+ platform_device_unregister(priv->cpufreq_dt_pdev);
+ priv->cpufreq_dt_pdev = ERR_PTR(-ENODEV);
+ }
+
+ clk_put(priv->pllp_clk);
+ clk_put(priv->pllx_clk);
+ clk_put(priv->dfll_clk);
+ clk_put(priv->cpu_clk);
+}
+
static const struct dev_pm_ops tegra124_cpufreq_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(tegra124_cpufreq_suspend,
tegra124_cpufreq_resume)
@@ -182,12 +196,12 @@ static struct platform_driver tegra124_cpufreq_platdrv = {
.driver.name = "cpufreq-tegra124",
.driver.pm = &tegra124_cpufreq_pm_ops,
.probe = tegra124_cpufreq_probe,
+ .remove = tegra124_cpufreq_remove,
};
static int __init tegra_cpufreq_init(void)
{
int ret;
- struct platform_device *pdev;
if (!(of_machine_is_compatible("nvidia,tegra124") ||
of_machine_is_compatible("nvidia,tegra210")))
@@ -201,15 +215,25 @@ static int __init tegra_cpufreq_init(void)
if (ret)
return ret;
- pdev = platform_device_register_simple("cpufreq-tegra124", -1, NULL, 0);
- if (IS_ERR(pdev)) {
+ platform_device = platform_device_register_simple("cpufreq-tegra124", -1, NULL, 0);
+ if (IS_ERR(platform_device)) {
platform_driver_unregister(&tegra124_cpufreq_platdrv);
- return PTR_ERR(pdev);
+ return PTR_ERR(platform_device);
}
return 0;
}
module_init(tegra_cpufreq_init);
+static void __exit tegra_cpufreq_module_exit(void)
+{
+ if (platform_device && !IS_ERR(platform_device))
+ platform_device_unregister(platform_device);
+
+ platform_driver_unregister(&tegra124_cpufreq_platdrv);
+}
+module_exit(tegra_cpufreq_module_exit);
+
MODULE_AUTHOR("Tuomas Tynkkynen <ttynkkynen@nvidia.com>");
MODULE_DESCRIPTION("cpufreq driver for NVIDIA Tegra124");
+MODULE_LICENSE("GPL");
--
2.50.0
^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH v5 3/3] cpufreq: tegra124: Allow building as a module
2025-07-02 7:46 ` [PATCH v5 3/3] cpufreq: tegra124: Allow building as a module Aaron Kling via B4 Relay
@ 2025-07-02 8:12 ` Viresh Kumar
2025-07-03 18:33 ` Aaron Kling
2025-07-04 11:53 ` Jon Hunter
1 sibling, 1 reply; 7+ messages in thread
From: Viresh Kumar @ 2025-07-02 8:12 UTC (permalink / raw)
To: webgeek1234
Cc: Rafael J. Wysocki, Thierry Reding, Jonathan Hunter, linux-pm,
linux-kernel, linux-tegra
On 02-07-25, 02:46, Aaron Kling via B4 Relay wrote:
> +static struct platform_device *platform_device;
Maybe initialize this to an error value...
> +static void __exit tegra_cpufreq_module_exit(void)
> +{
> + if (platform_device && !IS_ERR(platform_device))
... and then this could be simplified ?
Or use !IS_ERR_OR_NULL .
--
viresh
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v5 3/3] cpufreq: tegra124: Allow building as a module
2025-07-02 8:12 ` Viresh Kumar
@ 2025-07-03 18:33 ` Aaron Kling
0 siblings, 0 replies; 7+ messages in thread
From: Aaron Kling @ 2025-07-03 18:33 UTC (permalink / raw)
To: Viresh Kumar
Cc: Rafael J. Wysocki, Thierry Reding, Jonathan Hunter, linux-pm,
linux-kernel, linux-tegra
On Wed, Jul 2, 2025 at 3:12 AM Viresh Kumar <viresh.kumar@linaro.org> wrote:
>
> On 02-07-25, 02:46, Aaron Kling via B4 Relay wrote:
> > +static struct platform_device *platform_device;
>
> Maybe initialize this to an error value...
>
> > +static void __exit tegra_cpufreq_module_exit(void)
> > +{
> > + if (platform_device && !IS_ERR(platform_device))
>
> ... and then this could be simplified ?
>
> Or use !IS_ERR_OR_NULL .
Latter sounds better to me. I'll queue that up and send a new patchset
in a couple days, pending any further comments.
Aaron
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v5 3/3] cpufreq: tegra124: Allow building as a module
2025-07-02 7:46 ` [PATCH v5 3/3] cpufreq: tegra124: Allow building as a module Aaron Kling via B4 Relay
2025-07-02 8:12 ` Viresh Kumar
@ 2025-07-04 11:53 ` Jon Hunter
1 sibling, 0 replies; 7+ messages in thread
From: Jon Hunter @ 2025-07-04 11:53 UTC (permalink / raw)
To: webgeek1234, Rafael J. Wysocki, Viresh Kumar, Thierry Reding
Cc: linux-pm, linux-kernel, linux-tegra
On 02/07/2025 08:46, Aaron Kling via B4 Relay wrote:
> From: Aaron Kling <webgeek1234@gmail.com>
>
> This requires three changes:
> * Using the cpufreq-dt register helper to establish a hard dependency
> for depmod to track
> * Adding a remove routine to remove the cpufreq-dt device
> * Adding a exit routine to handle cleaning up the driver
And populate the license?
>
> Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
> ---
> drivers/cpufreq/Kconfig.arm | 2 +-
> drivers/cpufreq/tegra124-cpufreq.c | 44 +++++++++++++++++++++++++++++---------
> 2 files changed, 35 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
> index 4f9cb943d945c244eb2b29f543d14df6cac4e5d4..625f6fbdaaf5fd774e3b0bb996eb7ce980da41ee 100644
> --- a/drivers/cpufreq/Kconfig.arm
> +++ b/drivers/cpufreq/Kconfig.arm
> @@ -238,7 +238,7 @@ config ARM_TEGRA20_CPUFREQ
> This adds the CPUFreq driver support for Tegra20/30 SOCs.
>
> config ARM_TEGRA124_CPUFREQ
> - bool "Tegra124 CPUFreq support"
> + tristate "Tegra124 CPUFreq support"
> depends on ARCH_TEGRA || COMPILE_TEST
> depends on CPUFREQ_DT
> default y
> diff --git a/drivers/cpufreq/tegra124-cpufreq.c b/drivers/cpufreq/tegra124-cpufreq.c
> index 514146d98bca2d8aa59980a14dff3487cd8045f6..ebce62be9a9c17724d50dadeea1bb2ec81538421 100644
> --- a/drivers/cpufreq/tegra124-cpufreq.c
> +++ b/drivers/cpufreq/tegra124-cpufreq.c
> @@ -16,6 +16,10 @@
> #include <linux/pm_opp.h>
> #include <linux/types.h>
>
> +#include "cpufreq-dt.h"
> +
> +static struct platform_device *platform_device;
I think that this could do with a better name than just
'platform_device'. Maybe something like tegra124_cpufreq_pdev?
> +
> struct tegra124_cpufreq_priv {
> struct clk *cpu_clk;
> struct clk *pllp_clk;
> @@ -55,7 +59,6 @@ static int tegra124_cpufreq_probe(struct platform_device *pdev)
> struct device_node *np __free(device_node) = of_cpu_device_node_get(0);
> struct tegra124_cpufreq_priv *priv;
> struct device *cpu_dev;
> - struct platform_device_info cpufreq_dt_devinfo = {};
> int ret;
>
> if (!np)
> @@ -95,11 +98,7 @@ static int tegra124_cpufreq_probe(struct platform_device *pdev)
> if (ret)
> goto out_put_pllp_clk;
>
> - cpufreq_dt_devinfo.name = "cpufreq-dt";
> - cpufreq_dt_devinfo.parent = &pdev->dev;
> -
> - priv->cpufreq_dt_pdev =
> - platform_device_register_full(&cpufreq_dt_devinfo);
> + priv->cpufreq_dt_pdev = cpufreq_dt_pdev_register(&pdev->dev);
> if (IS_ERR(priv->cpufreq_dt_pdev)) {
> ret = PTR_ERR(priv->cpufreq_dt_pdev);
> goto out_put_pllp_clk;
> @@ -173,6 +172,21 @@ static int __maybe_unused tegra124_cpufreq_resume(struct device *dev)
> return err;
> }
>
> +static void tegra124_cpufreq_remove(struct platform_device *pdev)
> +{
> + struct tegra124_cpufreq_priv *priv = dev_get_drvdata(&pdev->dev);
> +
> + if (!IS_ERR(priv->cpufreq_dt_pdev)) {
> + platform_device_unregister(priv->cpufreq_dt_pdev);
> + priv->cpufreq_dt_pdev = ERR_PTR(-ENODEV);
> + }
> +
> + clk_put(priv->pllp_clk);
> + clk_put(priv->pllx_clk);
> + clk_put(priv->dfll_clk);
> + clk_put(priv->cpu_clk);
> +}
> +
> static const struct dev_pm_ops tegra124_cpufreq_pm_ops = {
> SET_SYSTEM_SLEEP_PM_OPS(tegra124_cpufreq_suspend,
> tegra124_cpufreq_resume)
> @@ -182,12 +196,12 @@ static struct platform_driver tegra124_cpufreq_platdrv = {
> .driver.name = "cpufreq-tegra124",
> .driver.pm = &tegra124_cpufreq_pm_ops,
> .probe = tegra124_cpufreq_probe,
> + .remove = tegra124_cpufreq_remove,
> };
>
> static int __init tegra_cpufreq_init(void)
> {
> int ret;
> - struct platform_device *pdev;
>
> if (!(of_machine_is_compatible("nvidia,tegra124") ||
> of_machine_is_compatible("nvidia,tegra210")))
> @@ -201,15 +215,25 @@ static int __init tegra_cpufreq_init(void)
> if (ret)
> return ret;
>
> - pdev = platform_device_register_simple("cpufreq-tegra124", -1, NULL, 0);
> - if (IS_ERR(pdev)) {
> + platform_device = platform_device_register_simple("cpufreq-tegra124", -1, NULL, 0);
> + if (IS_ERR(platform_device)) {
> platform_driver_unregister(&tegra124_cpufreq_platdrv);
> - return PTR_ERR(pdev);
> + return PTR_ERR(platform_device);
> }
>
> return 0;
> }
> module_init(tegra_cpufreq_init);
>
> +static void __exit tegra_cpufreq_module_exit(void)
> +{
> + if (platform_device && !IS_ERR(platform_device))
> + platform_device_unregister(platform_device);
> +
> + platform_driver_unregister(&tegra124_cpufreq_platdrv);
> +}
> +module_exit(tegra_cpufreq_module_exit);
> +
> MODULE_AUTHOR("Tuomas Tynkkynen <ttynkkynen@nvidia.com>");
> MODULE_DESCRIPTION("cpufreq driver for NVIDIA Tegra124");
> +MODULE_LICENSE("GPL");
>
--
nvpublic
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2025-07-04 11:53 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2025-07-02 7:46 [PATCH v5 0/3] Support building tegra124-cpufreq as a module Aaron Kling via B4 Relay
2025-07-02 7:46 ` [PATCH v5 1/3] cpufreq: Export disable_cpufreq() Aaron Kling via B4 Relay
2025-07-02 7:46 ` [PATCH v5 2/3] cpufreq: dt: Add register helper Aaron Kling via B4 Relay
2025-07-02 7:46 ` [PATCH v5 3/3] cpufreq: tegra124: Allow building as a module Aaron Kling via B4 Relay
2025-07-02 8:12 ` Viresh Kumar
2025-07-03 18:33 ` Aaron Kling
2025-07-04 11:53 ` Jon Hunter
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).