linux-tegra.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Svyatoslav Ryhel <clamor95@gmail.com>
To: "Rafael J. Wysocki" <rafael@kernel.org>,
	Daniel Lezcano <daniel.lezcano@linaro.org>,
	Zhang Rui <rui.zhang@intel.com>,
	Lukasz Luba <lukasz.luba@arm.com>, Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Thierry Reding <thierry.reding@gmail.com>,
	Thierry Reding <treding@nvidia.com>,
	Mikko Perttunen <mperttunen@nvidia.com>,
	Jonathan Hunter <jonathanh@nvidia.com>,
	Svyatoslav Ryhel <clamor95@gmail.com>
Cc: linux-pm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-tegra@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v5 6/6] ARM: tegra: Add SOCTHERM support on Tegra114
Date: Thu, 28 Aug 2025 08:51:04 +0300	[thread overview]
Message-ID: <20250828055104.8073-7-clamor95@gmail.com> (raw)
In-Reply-To: <20250828055104.8073-1-clamor95@gmail.com>

Add SOCTHERM and thermal zones nodes into common Tegra 4 device tree.

Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
---
 arch/arm/boot/dts/nvidia/tegra114.dtsi | 197 +++++++++++++++++++++++++
 1 file changed, 197 insertions(+)

diff --git a/arch/arm/boot/dts/nvidia/tegra114.dtsi b/arch/arm/boot/dts/nvidia/tegra114.dtsi
index c429478eb122..c3f540b29c69 100644
--- a/arch/arm/boot/dts/nvidia/tegra114.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra114.dtsi
@@ -6,6 +6,7 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/reset/tegra114-car.h>
 #include <dt-bindings/soc/tegra-pmc.h>
+#include <dt-bindings/thermal/tegra114-soctherm.h>
 
 / {
 	compatible = "nvidia,tegra114";
@@ -694,6 +695,46 @@ mipi: mipi@700e3000 {
 		#nvidia,mipi-calibrate-cells = <1>;
 	};
 
+	soctherm: thermal-sensor@700e2000 {
+		compatible = "nvidia,tegra114-soctherm";
+		reg = <0x700e2000 0x600>, /* SOC_THERM reg_base */
+		      <0x60006000 0x400>; /* CAR reg_base */
+		reg-names = "soctherm-reg", "car-reg";
+		interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "thermal", "edp";
+		clocks = <&tegra_car TEGRA114_CLK_TSENSOR>,
+			 <&tegra_car TEGRA114_CLK_SOC_THERM>;
+		clock-names = "tsensor", "soctherm";
+		resets = <&tegra_car 78>;
+		reset-names = "soctherm";
+
+		assigned-clocks = <&tegra_car TEGRA114_CLK_TSENSOR>,
+				  <&tegra_car TEGRA114_CLK_SOC_THERM>;
+		assigned-clock-rates = <500000>, <51000000>;
+
+		assigned-clock-parents = <&tegra_car TEGRA114_CLK_CLK_M>,
+					 <&tegra_car TEGRA114_CLK_PLL_P>;
+
+		#thermal-sensor-cells = <1>;
+
+		throttle-cfgs {
+			throttle_heavy: heavy {
+				nvidia,priority = <100>;
+				nvidia,cpu-throt-percent = <80>;
+				nvidia,gpu-throt-level = <TEGRA114_SOCTHERM_THROT_LEVEL_HIGH>;
+				#cooling-cells = <2>;
+			};
+
+			throttle_light: light {
+				nvidia,priority = <80>;
+				nvidia,cpu-throt-percent = <50>;
+				nvidia,gpu-throt-level = <TEGRA114_SOCTHERM_THROT_LEVEL_MED>;
+				#cooling-cells = <2>;
+			};
+		};
+	};
+
 	dfll: clock@70110000 {
 		compatible = "nvidia,tegra114-dfll";
 		reg = <0x70110000 0x100>, /* DFLL control */
@@ -857,24 +898,28 @@ cpu0: cpu@0 {
 			clock-names = "cpu_g", "cpu_lp", "pll_x", "pll_p", "dfll";
 			/* FIXME: what's the actual transition time? */
 			clock-latency = <300000>;
+			#cooling-cells = <2>;
 		};
 
 		cpu1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <1>;
+			#cooling-cells = <2>;
 		};
 
 		cpu2: cpu@2 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <2>;
+			#cooling-cells = <2>;
 		};
 
 		cpu3: cpu@3 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <3>;
+			#cooling-cells = <2>;
 		};
 	};
 
@@ -887,6 +932,158 @@ pmu {
 		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
 	};
 
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <1000>;
+
+			thermal-sensors =
+				<&soctherm TEGRA114_SOCTHERM_SENSOR_CPU>;
+
+			trips {
+				cpu-shutdown-trip {
+					temperature = <102000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+
+				cpu_throttle_trip: cpu-throttle-trip {
+					temperature = <100000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+
+				cpu_balanced_trip: cpu-balanced-trip {
+					temperature = <90000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_throttle_trip>;
+					cooling-device = <&throttle_heavy 1 1>;
+				};
+
+				map1 {
+					trip = <&cpu_balanced_trip>;
+					cooling-device = <&throttle_light 1 1>;
+				};
+			};
+		};
+
+		mem-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <1000>;
+
+			thermal-sensors =
+				<&soctherm TEGRA114_SOCTHERM_SENSOR_MEM>;
+
+			trips {
+				mem-shutdown-trip {
+					temperature = <102000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+
+				mem_throttle_trip: mem-throttle-trip {
+					temperature = <100000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+
+				mem_balanced_trip: mem-balanced-trip {
+					temperature = <90000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+
+			cooling-maps {
+				/*
+				 * There are currently no cooling maps,
+				 * because there are no cooling devices.
+				 */
+			};
+		};
+
+		gpu-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <1000>;
+
+			thermal-sensors =
+				<&soctherm TEGRA114_SOCTHERM_SENSOR_GPU>;
+
+			trips {
+				gpu-shutdown-trip {
+					temperature = <102000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+
+				gpu_throttle_trip: gpu-throttle-trip {
+					temperature = <100000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+
+				gpu_balanced_trip: gpu-balanced-trip {
+					temperature = <90000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&gpu_throttle_trip>;
+					cooling-device = <&throttle_heavy 1 1>;
+				};
+
+				map1 {
+					trip = <&gpu_balanced_trip>;
+					cooling-device = <&throttle_light 1 1>;
+				};
+			};
+		};
+
+		pllx-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <1000>;
+
+			thermal-sensors =
+				<&soctherm TEGRA114_SOCTHERM_SENSOR_PLLX>;
+
+			trips {
+				pllx-shutdown-trip {
+					temperature = <102000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+
+				pllx_throttle_trip: pllx-throttle-trip {
+					temperature = <100000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+
+				pllx_balanced_trip: pllx-balanced-trip {
+					temperature = <90000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+
+			cooling-maps {
+				/*
+				 * There are currently no cooling maps,
+				 * because there are no cooling devices.
+				 */
+			};
+		};
+	};
+
 	timer {
 		compatible = "arm,armv7-timer";
 		interrupts =
-- 
2.48.1


      parent reply	other threads:[~2025-08-28  5:51 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-08-28  5:50 [PATCH v5 0/6] thermal: tegra: add SOCTHERM support for Tegra114 Svyatoslav Ryhel
2025-08-28  5:50 ` [PATCH v5 1/6] soc: tegra: fuse: add Tegra114 nvmem cells and fuse lookups Svyatoslav Ryhel
2025-08-28  5:51 ` [PATCH v5 2/6] dt-bindings: thermal: Document Tegra114 SOCTHERM Thermal Management System Svyatoslav Ryhel
2025-08-28  5:51 ` [PATCH v5 3/6] thermal: tegra: soctherm-fuse: prepare calibration for Tegra114 support Svyatoslav Ryhel
2025-08-28  5:51 ` [PATCH v5 4/6] dt-bindings: thermal: add Tegra114 soctherm header Svyatoslav Ryhel
2025-08-28  5:51 ` [PATCH v5 5/6] thermal: tegra: add Tegra114 specific SOCTHERM driver Svyatoslav Ryhel
2025-08-28  7:57   ` Mikko Perttunen
2025-08-28  5:51 ` Svyatoslav Ryhel [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250828055104.8073-7-clamor95@gmail.com \
    --to=clamor95@gmail.com \
    --cc=conor+dt@kernel.org \
    --cc=daniel.lezcano@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jonathanh@nvidia.com \
    --cc=krzk+dt@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=lukasz.luba@arm.com \
    --cc=mperttunen@nvidia.com \
    --cc=rafael@kernel.org \
    --cc=robh@kernel.org \
    --cc=rui.zhang@intel.com \
    --cc=thierry.reding@gmail.com \
    --cc=treding@nvidia.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).