From: Manikanta Maddireddy <mmaddireddy@nvidia.com>
To: <bhelgaas@google.com>, <lpieralisi@kernel.org>,
<kwilczynski@kernel.org>, <mani@kernel.org>, <robh@kernel.org>,
<krzk+dt@kernel.org>, <conor+dt@kernel.org>,
<thierry.reding@gmail.com>, <jonathanh@nvidia.com>,
<kishon@kernel.org>, <arnd@arndb.de>,
<gregkh@linuxfoundation.org>, <Frank.Li@nxp.com>,
<den@valinux.co.jp>, <hongxing.zhu@nxp.com>,
<jingoohan1@gmail.com>, <vidyas@nvidia.com>, <cassel@kernel.org>,
<18255117159@163.com>
Cc: <linux-pci@vger.kernel.org>, <linux-tegra@vger.kernel.org>,
<linux-kernel@vger.kernel.org>,
Manikanta Maddireddy <mmaddireddy@nvidia.com>
Subject: [PATCH v8 02/14] PCI: tegra194: Increase LTSSM poll time on surprise down
Date: Wed, 25 Mar 2026 00:37:43 +0530 [thread overview]
Message-ID: <20260324190755.1094879-3-mmaddireddy@nvidia.com> (raw)
In-Reply-To: <20260324190755.1094879-1-mmaddireddy@nvidia.com>
On surprise down, LTSSM state transits from L0 -> Recovery.RcvrLock ->
Recovery.RcvrSpeed -> Gen1 Recovery.RcvrLock -> Detect. Recovery.RcvrLock
and Recovery.RcvrSpeed transit times are 24 ms and 48 ms respectively, so
the total time from L0 to detect is ~96 ms. Increase the poll timeout to
120 ms to account for this.
Add LTSSM state defines for detect-related states and use them in the
poll condition. Use readl_poll_timeout() instead of readl_poll_timeout_atomic()
in tegra_pcie_dw_pme_turnoff() since that path runs in non-atomic context.
Fixes: 56e15a238d92 ("PCI: tegra: Add Tegra194 PCIe support")
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
---
Changes V8: Split into two patches
Changes V6 -> V7: Append _US to LTSSM macros
Changes V5 -> V6: Retain only one fixes tag
Changes V1 -> V5: None
drivers/pci/controller/dwc/pcie-tegra194.c | 36 +++++++++++++---------
1 file changed, 21 insertions(+), 15 deletions(-)
diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c
index d6c6bd512b51..5b243c006562 100644
--- a/drivers/pci/controller/dwc/pcie-tegra194.c
+++ b/drivers/pci/controller/dwc/pcie-tegra194.c
@@ -137,7 +137,11 @@
#define APPL_DEBUG_PM_LINKST_IN_L0 0x11
#define APPL_DEBUG_LTSSM_STATE_MASK GENMASK(8, 3)
#define APPL_DEBUG_LTSSM_STATE_SHIFT 3
-#define LTSSM_STATE_PRE_DETECT 5
+#define LTSSM_STATE_DETECT_QUIET 0x00
+#define LTSSM_STATE_DETECT_ACT 0x08
+#define LTSSM_STATE_PRE_DETECT_QUIET 0x28
+#define LTSSM_STATE_DETECT_WAIT 0x30
+#define LTSSM_STATE_L2_IDLE 0xa8
#define APPL_RADM_STATUS 0xE4
#define APPL_PM_XMT_TURNOFF_STATE BIT(0)
@@ -198,7 +202,8 @@
#define CAP_SPCIE_CAP_OFF_USP_TX_PRESET0_MASK GENMASK(11, 8)
#define CAP_SPCIE_CAP_OFF_USP_TX_PRESET0_SHIFT 8
-#define LTSSM_TIMEOUT 50000 /* 50ms */
+#define LTSSM_DELAY_US 10000 /* 10 ms */
+#define LTSSM_TIMEOUT_US 120000 /* 120 ms */
#define GEN3_GEN4_EQ_PRESET_INIT 5
@@ -1597,15 +1602,14 @@ static void tegra_pcie_dw_pme_turnoff(struct tegra_pcie_dw *pcie)
data &= ~APPL_CTRL_LTSSM_EN;
writel(data, pcie->appl_base + APPL_CTRL);
- err = readl_poll_timeout_atomic(pcie->appl_base + APPL_DEBUG,
- data,
- ((data &
- APPL_DEBUG_LTSSM_STATE_MASK) >>
- APPL_DEBUG_LTSSM_STATE_SHIFT) ==
- LTSSM_STATE_PRE_DETECT,
- 1, LTSSM_TIMEOUT);
+ err = readl_poll_timeout(pcie->appl_base + APPL_DEBUG, data,
+ ((data & APPL_DEBUG_LTSSM_STATE_MASK) == LTSSM_STATE_DETECT_QUIET) ||
+ ((data & APPL_DEBUG_LTSSM_STATE_MASK) == LTSSM_STATE_DETECT_ACT) ||
+ ((data & APPL_DEBUG_LTSSM_STATE_MASK) == LTSSM_STATE_PRE_DETECT_QUIET) ||
+ ((data & APPL_DEBUG_LTSSM_STATE_MASK) == LTSSM_STATE_DETECT_WAIT),
+ LTSSM_DELAY_US, LTSSM_TIMEOUT_US);
if (err)
- dev_info(pcie->dev, "Link didn't go to detect state\n");
+ dev_info(pcie->dev, "LTSSM state: 0x%x detect timeout: %d\n", data, err);
}
/*
* DBI registers may not be accessible after this as PLL-E would be
@@ -1685,12 +1689,14 @@ static void pex_ep_event_pex_rst_assert(struct tegra_pcie_dw *pcie)
appl_writel(pcie, val, APPL_CTRL);
ret = readl_poll_timeout(pcie->appl_base + APPL_DEBUG, val,
- ((val & APPL_DEBUG_LTSSM_STATE_MASK) >>
- APPL_DEBUG_LTSSM_STATE_SHIFT) ==
- LTSSM_STATE_PRE_DETECT,
- 1, LTSSM_TIMEOUT);
+ ((val & APPL_DEBUG_LTSSM_STATE_MASK) == LTSSM_STATE_DETECT_QUIET) ||
+ ((val & APPL_DEBUG_LTSSM_STATE_MASK) == LTSSM_STATE_DETECT_ACT) ||
+ ((val & APPL_DEBUG_LTSSM_STATE_MASK) == LTSSM_STATE_PRE_DETECT_QUIET) ||
+ ((val & APPL_DEBUG_LTSSM_STATE_MASK) == LTSSM_STATE_DETECT_WAIT) ||
+ ((val & APPL_DEBUG_LTSSM_STATE_MASK) == LTSSM_STATE_L2_IDLE),
+ LTSSM_DELAY_US, LTSSM_TIMEOUT_US);
if (ret)
- dev_err(pcie->dev, "Failed to go Detect state: %d\n", ret);
+ dev_info(pcie->dev, "LTSSM state: 0x%x detect timeout: %d\n", val, ret);
reset_control_assert(pcie->core_rst);
--
2.34.1
next prev parent reply other threads:[~2026-03-24 19:08 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-24 19:07 [PATCH v8 00/14] Fixes to pcie-tegra194 driver Manikanta Maddireddy
2026-03-24 19:07 ` [PATCH v8 01/14] PCI: tegra194: Fix polling delay for L2 state Manikanta Maddireddy
2026-03-24 19:07 ` Manikanta Maddireddy [this message]
2026-03-24 19:07 ` [PATCH v8 03/14] PCI: tegra194: Disable LTSSM after transition to detect on surprise down Manikanta Maddireddy
2026-03-24 19:07 ` [PATCH v8 04/14] PCI: tegra194: Don't force the device into the D0 state before L2 Manikanta Maddireddy
2026-03-24 19:07 ` [PATCH v8 05/14] PCI: tegra194: Disable PERST IRQ only in Endpoint mode Manikanta Maddireddy
2026-03-24 19:07 ` [PATCH v8 06/14] PCI: tegra194: Use devm_gpiod_get_optional() to parse "nvidia,refclk-select" Manikanta Maddireddy
2026-03-24 19:07 ` [PATCH v8 07/14] PCI: tegra194: Disable direct speed change for Endpoint Manikanta Maddireddy
2026-03-24 19:07 ` [PATCH v8 08/14] PCI: tegra194: Set LTR message request before PCIe link up Manikanta Maddireddy
2026-03-24 19:07 ` [PATCH v8 09/14] PCI: tegra194: Allow system suspend when the Endpoint link is not up Manikanta Maddireddy
2026-04-08 20:59 ` Bjorn Helgaas
2026-04-08 21:03 ` Bjorn Helgaas
2026-04-09 6:59 ` Manikanta Maddireddy
2026-03-24 19:07 ` [PATCH v8 10/14] PCI: tegra194: Free up EP resources during remove() Manikanta Maddireddy
2026-03-24 19:07 ` [PATCH v8 11/14] PCI: tegra194: Use DWC IP core version Manikanta Maddireddy
2026-03-24 19:07 ` [PATCH v8 12/14] PCI: dwc: Apply ECRC workaround to DesignWare 5.00a as well Manikanta Maddireddy
2026-04-08 22:24 ` Bjorn Helgaas
2026-04-09 8:51 ` Manikanta Maddireddy
2026-04-09 18:45 ` Bjorn Helgaas
2026-04-10 6:32 ` Manikanta Maddireddy
2026-03-24 19:07 ` [PATCH v8 13/14] PCI: tegra194: Disable L1.2 capability of Tegra234 EP Manikanta Maddireddy
2026-03-24 19:07 ` [PATCH v8 14/14] PCI: tegra194: Fix CBB timeout caused by DBI access before core power-on Manikanta Maddireddy
2026-04-04 15:10 ` [PATCH v8 00/14] Fixes to pcie-tegra194 driver Manivannan Sadhasivam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260324190755.1094879-3-mmaddireddy@nvidia.com \
--to=mmaddireddy@nvidia.com \
--cc=18255117159@163.com \
--cc=Frank.Li@nxp.com \
--cc=arnd@arndb.de \
--cc=bhelgaas@google.com \
--cc=cassel@kernel.org \
--cc=conor+dt@kernel.org \
--cc=den@valinux.co.jp \
--cc=gregkh@linuxfoundation.org \
--cc=hongxing.zhu@nxp.com \
--cc=jingoohan1@gmail.com \
--cc=jonathanh@nvidia.com \
--cc=kishon@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=kwilczynski@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=lpieralisi@kernel.org \
--cc=mani@kernel.org \
--cc=robh@kernel.org \
--cc=thierry.reding@gmail.com \
--cc=vidyas@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox