From: Svyatoslav Ryhel <clamor95@gmail.com>
To: "Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Thierry Reding" <thierry.reding@kernel.org>,
"Jonathan Hunter" <jonathanh@nvidia.com>,
"Svyatoslav Ryhel" <clamor95@gmail.com>,
"Ion Agorria" <ion@agorria.com>,
"Jonas Schwöbel" <jonasschwoebel@yahoo.de>
Cc: devicetree@vger.kernel.org, linux-tegra@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v1 7/9] ARM: tegra: tf600t: Configure panel
Date: Mon, 6 Apr 2026 11:34:02 +0300 [thread overview]
Message-ID: <20260406083404.31359-8-clamor95@gmail.com> (raw)
In-Reply-To: <20260406083404.31359-1-clamor95@gmail.com>
Configure DSI panel used in ASUS VivoTab TF600T.
Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
---
.../boot/dts/nvidia/tegra30-asus-tf600t.dts | 62 ++++++++++++++++++-
1 file changed, 60 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/nvidia/tegra30-asus-tf600t.dts b/arch/arm/boot/dts/nvidia/tegra30-asus-tf600t.dts
index 9296e7970ce4..8b68bfef8dee 100644
--- a/arch/arm/boot/dts/nvidia/tegra30-asus-tf600t.dts
+++ b/arch/arm/boot/dts/nvidia/tegra30-asus-tf600t.dts
@@ -23,6 +23,7 @@ aliases {
rtc0 = &pmic;
rtc1 = "/rtc@7000e000";
+ display0 = &lcd;
display1 = &hdmi;
serial1 = &uartc; /* Bluetooth */
@@ -55,6 +56,37 @@ linux,cma@80000000 {
};
host1x@50000000 {
+ vi@54080000 {
+ status = "okay";
+
+ csi@800 {
+ status = "okay";
+
+ avdd-dsi-csi-supply = <&avdd_dsi_csi>;
+ };
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ vi_ppa_input: endpoint {
+ /* Link to the rear camera */
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ vi_ppb_input: endpoint {
+ /* Link to the front camera */
+ };
+ };
+ };
+ };
+
hdmi: hdmi@54280000 {
status = "okay";
@@ -68,6 +100,22 @@ hdmi_out: endpoint {
};
};
};
+
+ lcd: dsi@54300000 {
+ status = "okay";
+
+ avdd-dsi-csi-supply = <&avdd_dsi_csi>;
+
+ panel@0 {
+ compatible = "hydis,hv101hd1";
+ reg = <0>;
+
+ vdd-supply = <&vdd_panel>;
+ vio-supply = <&vio_panel>;
+
+ backlight = <&backlight>;
+ };
+ };
};
vde@6001a000 {
@@ -1123,11 +1171,10 @@ pmic-sleep-hog {
};
regulators {
- vdd_lcd: vdd1 {
+ vio_panel: vdd1 {
regulator-name = "vddio_ddr_1v2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
- regulator-always-on;
regulator-boot-on;
ti,regulator-ext-sleep-control = <8>;
};
@@ -2386,6 +2433,17 @@ vdd_5v0_bl: regulator-bl {
vin-supply = <&vdd_5v0_bat>;
};
+ vdd_panel: regulator-panel {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_panel";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ gpio = <&gpio TEGRA_GPIO(L, 4) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_3v3_sys>;
+ };
+
hdmi_5v0_sys: regulator-hdmi {
compatible = "regulator-fixed";
regulator-name = "hdmi_5v0_sys";
--
2.51.0
next prev parent reply other threads:[~2026-04-06 8:34 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-04-06 8:33 [PATCH v1 0/9] ARM: tegra: complete a few Tegra30 device trees Svyatoslav Ryhel
2026-04-06 8:33 ` [PATCH v1 1/9] ARM: tegra: lg-x3: Complete video device graph Svyatoslav Ryhel
2026-04-06 8:33 ` [PATCH v1 2/9] ARM: tegra: lg-x3: Set PMIC's RTC address Svyatoslav Ryhel
2026-04-06 8:33 ` [PATCH v1 3/9] ARM: tegra: p880: Lower CPU thermal limit Svyatoslav Ryhel
2026-04-06 8:33 ` [PATCH v1 4/9] ARM: tegra: grouper: Add support for front camera Svyatoslav Ryhel
2026-04-06 8:34 ` [PATCH v1 5/9] ARM: tegra: transformer: " Svyatoslav Ryhel
2026-04-06 8:34 ` [PATCH v1 6/9] ARM: tegra: transformers: Add connector node for common trees Svyatoslav Ryhel
2026-04-06 8:34 ` Svyatoslav Ryhel [this message]
2026-04-06 8:34 ` [PATCH v1 8/9] ARM: tegra: tf600t: Drop backlight regulator Svyatoslav Ryhel
2026-04-06 8:34 ` [PATCH v1 9/9] ARM: tegra: tf600t: Invert accelerometer calibration matrix Svyatoslav Ryhel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260406083404.31359-8-clamor95@gmail.com \
--to=clamor95@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=ion@agorria.com \
--cc=jonasschwoebel@yahoo.de \
--cc=jonathanh@nvidia.com \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=robh@kernel.org \
--cc=thierry.reding@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox