[PATCH 2/2] arm64: tegra: Add Lenovo ThinkEdge SE70 device tree

[Jiqi Li <lijq9@lenovo.com>]

Add initial device tree support for the Lenovo ThinkEdge SE70, an
industrial edge gateway based on the NVIDIA Jetson Xavier NX module
(P3668-0001) with a custom carrier board.

This initial submission includes:
- 40-pin expansion header pinmux configuration
- External Micro SD card slot with dedicated 3.3V regulator
- I2C bus for 40-pin header

Static verification passed: dt_binding_check and dtbs compilation
complete without errors.

Signed-off-by: Jiqi Li <lijq9@lenovo.com>
---
Changes in v2:
- Remove unused input-related headers from baseboard DTSI
---
 arch/arm64/boot/dts/nvidia/Makefile           |   1 +
 ...ra194-lenovo-thinkedge-se70-baseboard.dtsi | 103 ++++++++++++++++++
 .../nvidia/tegra194-lenovo-thinkedge-se70.dts |  14 +++
 3 files changed, 118 insertions(+)
 create mode 100644 arch/arm64/boot/dts/nvidia/tegra194-lenovo-thinkedge-se70-baseboard.dtsi
 create mode 100644 arch/arm64/boot/dts/nvidia/tegra194-lenovo-thinkedge-se70.dts

diff --git a/arch/arm64/boot/dts/nvidia/Makefile b/arch/arm64/boot/dts/nvidia/Makefile
index 72c0cb5efa47..736a3f8a923f 100644
--- a/arch/arm64/boot/dts/nvidia/Makefile
+++ b/arch/arm64/boot/dts/nvidia/Makefile
@@ -29,6 +29,7 @@ dtb-$(CONFIG_ARCH_TEGRA_186_SOC) += tegra186-p3509-0000+p3636-0001.dtb
 dtb-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra194-p2972-0000.dtb
 dtb-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra194-p3509-0000+p3668-0000.dtb
 dtb-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra194-p3509-0000+p3668-0001.dtb
+dtb-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra194-lenovo-thinkedge-se70.dtb
 dtb-$(CONFIG_ARCH_TEGRA_234_SOC) += tegra234-sim-vdk.dtb
 dtb-$(CONFIG_ARCH_TEGRA_234_SOC) += tegra234-p3737-0000+p3701-0000.dtb
 dtb-$(CONFIG_ARCH_TEGRA_234_SOC) += tegra234-p3737-0000+p3701-0008.dtb
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-lenovo-thinkedge-se70-baseboard.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-lenovo-thinkedge-se70-baseboard.dtsi
new file mode 100644
index 000000000000..d0f33384c1f8
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra194-lenovo-thinkedge-se70-baseboard.dtsi
@@ -0,0 +1,103 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/gpio/tegra194-gpio.h>
+
+/ {
+	vdd_5v0_sys: regulator-vdd-5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_5V_SYS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/* Fixed 3.3V power supply regulator for external Micro SD slot */
+	vdd_3v3_sd: regulator-sd-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_3V3_SD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio TEGRA194_MAIN_GPIO(Q, 5) GPIO_ACTIVE_HIGH>;
+		regulator-boot-on;
+		enable-active-high;
+	};
+
+	bus@0 {
+		/* 40-pin expansion header custom pinmux configuration */
+		pinmux@2430000 {
+			status = "okay";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinmux_hdr40>;
+
+			pinmux_hdr40: pinmux-hdr40 {
+				pin7 {
+					nvidia,pins = "aud_mclk_ps4";
+					nvidia,function = "aud";
+					nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+					nvidia,tristate = <TEGRA_PIN_DISABLE>;
+					nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				};
+				pin11 {
+					nvidia,pins = "uart1_rts_pr4";
+					nvidia,function = "uarta";
+					nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+					nvidia,tristate = <TEGRA_PIN_DISABLE>;
+					nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				};
+				pin12 {
+					nvidia,pins = "dap5_sclk_pt5";
+					nvidia,function = "i2s5";
+					nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+					nvidia,tristate = <TEGRA_PIN_DISABLE>;
+					nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				};
+				pin35 {
+					nvidia,pins = "dap5_fs_pu0";
+					nvidia,function = "i2s5";
+					nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+					nvidia,tristate = <TEGRA_PIN_DISABLE>;
+					nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				};
+				pin36 {
+					nvidia,pins = "uart1_cts_pr5";
+					nvidia,function = "uarta";
+					nvidia,pull = <TEGRA_PIN_PULL_UP>;
+					nvidia,tristate = <TEGRA_PIN_ENABLE>;
+					nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				};
+				pin38 {
+					nvidia,pins = "dap5_din_pt7";
+					nvidia,function = "i2s5";
+					nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+					nvidia,tristate = <TEGRA_PIN_ENABLE>;
+					nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				};
+				pin40 {
+					nvidia,pins = "dap5_dout_pt6";
+					nvidia,function = "i2s5";
+					nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+					nvidia,tristate = <TEGRA_PIN_DISABLE>;
+					nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				};
+			};
+		};
+
+		/* Configure i2c bus clock to 400kHz for carrier board peripherals */
+		i2c@3160000 {
+			clock-frequency = <400000>;
+			status = "okay";
+		};
+
+		/* SDMMC3: External Micro SD card slot */
+		mmc@3440000 {
+			bus-width = <4>;
+			cd-gpios = <&gpio_aon TEGRA194_AON_GPIO(CC, 4) GPIO_ACTIVE_LOW>;
+			disable-wp;
+			no-1-8-v;
+			vmmc-supply = <&vdd_3v3_sd>;
+			status = "okay";
+		};
+
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-lenovo-thinkedge-se70.dts b/arch/arm64/boot/dts/nvidia/tegra194-lenovo-thinkedge-se70.dts
new file mode 100644
index 000000000000..a8de685f05ef
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra194-lenovo-thinkedge-se70.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra194-p3668-0001.dtsi"
+#include "tegra194-lenovo-thinkedge-se70-baseboard.dtsi"
+
+/ {
+	model = "Lenovo ThinkEdge SE70";
+	compatible = "lenovo,thinkedge-se70", "nvidia,p3668-0001", "nvidia,tegra194";
+
+	chosen {
+		bootargs = "console=ttyTCU0,115200";
+	};
+};
-- 
2.43.0