Linux Tegra architecture development
 help / color / mirror / Atom feed
From: Conor Dooley <conor@kernel.org>
To: Srirangan Madhavan <smadhavan@nvidia.com>
Cc: mark.rutland@arm.com, lpieralisi@kernel.org,
	sudeep.holla@kernel.org, jic23@kernel.org,
	catalin.marinas@arm.com, will@kernel.org, andre.przywara@arm.com,
	aneesh.kumar@kernel.org, Souvik.Chakravarty@arm.com,
	treding@nvidia.com, jonathanh@nvidia.com, bence.csokas@arm.com,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-tegra@vger.kernel.org,
	Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Subject: Re: [PATCH v5 2/2] cache: add SMCCC-backed cache invalidate provider
Date: Thu, 29 Oct 2026 23:21:50 +0000	[thread overview]
Message-ID: <20261029-feline-monastery-07bf67308136@spud> (raw)
In-Reply-To: <20261021224557.1827361-3-smadhavan@nvidia.com>

[-- Attachment #1: Type: text/plain, Size: 8053 bytes --]

On Wed, Oct 21, 2026 at 10:45:57PM +0000, Srirangan Madhavan wrote:
> Add a cache maintenance provider for the cache clean+invalidate interface
> defined by Arm DEN0028 v1.7.
> 
> Register the interface attributes function as an SMCCC device and bind the
> provider through the SMCCC bus. The provider reads the firmware attributes
> during probe and serializes cache maintenance calls. It handles transient
> BUSY and RATE_LIMITED responses with bounded retries. It also registers
> with the generic cache coherency framework used by memregion callers.
> 
> Signed-off-by: Srirangan Madhavan <smadhavan@nvidia.com>
> Reviewed-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>

I acked this on v3, but I don't see it here or a reason for why it
isn't. Ultimately, you're only harming yourself but still.


Unless the arm64 guys pipe up and expect me to take this,
Acked-by: Conor Dooley <conor.dooley@microchip.com>
because it's so tied to arm architectural stuff.

Cheers,
Conor.


> ---
>  drivers/cache/Kconfig           |  11 +++
>  drivers/cache/Makefile          |   2 +
>  drivers/cache/arm_smccc_cache.c | 156 ++++++++++++++++++++++++++++++++
>  drivers/firmware/smccc/smccc.c  |   5 +
>  4 files changed, 174 insertions(+)
>  create mode 100644 drivers/cache/arm_smccc_cache.c
> 
> diff --git a/drivers/cache/Kconfig b/drivers/cache/Kconfig
> index 1518449d47b5..57fd1823dec5 100644
> --- a/drivers/cache/Kconfig
> +++ b/drivers/cache/Kconfig
> @@ -42,6 +42,17 @@ menuconfig CACHEMAINT_FOR_HOTPLUG
>  
>  if CACHEMAINT_FOR_HOTPLUG
>  
> +config ARM_SMCCC_CACHE
> +	bool "Arm SMCCC cache maintenance provider"
> +	depends on ARM64 && HAVE_ARM_SMCCC_DISCOVERY
> +	help
> +	  Enable support for the Arm SMCCC cache clean+invalidate
> +	  interface as a provider for memory hotplug-like cache
> +	  maintenance operations.
> +	  The provider registers only when firmware advertises the
> +	  SMCCC calls and attributes, so systems without firmware support
> +	  continue without this registered provider.
> +
>  config HISI_SOC_HHA
>  	tristate "HiSilicon Hydra Home Agent (HHA) device driver"
>  	depends on (ARM64 && ACPI) || COMPILE_TEST
> diff --git a/drivers/cache/Makefile b/drivers/cache/Makefile
> index b3362b15d6c1..55736a032d6f 100644
> --- a/drivers/cache/Makefile
> +++ b/drivers/cache/Makefile
> @@ -4,4 +4,6 @@ obj-$(CONFIG_AX45MP_L2_CACHE)		+= ax45mp_cache.o
>  obj-$(CONFIG_SIFIVE_CCACHE)		+= sifive_ccache.o
>  obj-$(CONFIG_STARFIVE_STARLINK_CACHE)	+= starfive_starlink_cache.o
>  
> +# Providers below depend on CACHEMAINT_FOR_HOTPLUG.
> +obj-$(CONFIG_ARM_SMCCC_CACHE)		+= arm_smccc_cache.o
>  obj-$(CONFIG_HISI_SOC_HHA)		+= hisi_soc_hha.o
> diff --git a/drivers/cache/arm_smccc_cache.c b/drivers/cache/arm_smccc_cache.c
> new file mode 100644
> index 000000000000..abe6881f3de3
> --- /dev/null
> +++ b/drivers/cache/arm_smccc_cache.c
> @@ -0,0 +1,156 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2026 NVIDIA Corporation
> + *
> + * Arm SMCCC cache maintenance provider using the cache clean+invalidate
> + * interface defined by Arm DEN0028 v1.7.
> + */
> +
> +#include <linux/arm-smccc.h>
> +#include <linux/arm-smccc-bus.h>
> +#include <linux/cache_coherency.h>
> +#include <linux/cleanup.h>
> +#include <linux/container_of.h>
> +#include <linux/delay.h>
> +#include <linux/errno.h>
> +#include <linux/math.h>
> +#include <linux/minmax.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/nmi.h>
> +#include <linux/time64.h>
> +#include <linux/types.h>
> +
> +#define SMCCC_CACHE_MAX_RETRIES		5
> +#define SMCCC_CACHE_DEFAULT_DELAY_US	1000UL
> +#define SMCCC_CACHE_MAX_DELAY_US	20000UL
> +
> +struct smccc_cache {
> +	/* Must be first member */
> +	struct cache_coherency_ops_inst cci;
> +	struct mutex lock; /* Serializes SMCCC cache maintenance calls. */
> +	u64 rate_limit;
> +};
> +
> +static int smccc_cache_status_to_errno(s32 status)
> +{
> +	switch (status) {
> +	case SMCCC_RET_SUCCESS:
> +		return 0;
> +	case SMCCC_RET_NOT_SUPPORTED:
> +		return -EOPNOTSUPP;
> +	case SMCCC_RET_INVALID_PARAMETER:
> +		return -EINVAL;
> +	case SMCCC_RET_RATE_LIMITED:
> +		return -EAGAIN;
> +	case SMCCC_RET_BUSY:
> +		return -EBUSY;
> +	default:
> +		return -EIO;
> +	}
> +}
> +
> +static unsigned long smccc_cache_delay_us(const struct smccc_cache *cache)
> +{
> +	unsigned long delay_us = 0;
> +
> +	if (cache->rate_limit)
> +		delay_us = DIV_ROUND_UP_ULL(USEC_PER_SEC, cache->rate_limit);
> +
> +	/*
> +	 * Firmware may not advertise a rate limit; use a small bounded backoff
> +	 * instead of retrying in a tight loop.
> +	 */
> +	if (!delay_us)
> +		delay_us = SMCCC_CACHE_DEFAULT_DELAY_US;
> +
> +	return min(delay_us, SMCCC_CACHE_MAX_DELAY_US);
> +}
> +
> +static int smccc_cache_wbinv(struct cache_coherency_ops_inst *cci,
> +			     struct cc_inval_params *invp)
> +{
> +	struct smccc_cache *cache = container_of(cci, struct smccc_cache, cci);
> +	unsigned long delay_us = smccc_cache_delay_us(cache);
> +	struct arm_smccc_res res = {};
> +	int ret;
> +
> +	if (!invp->size)
> +		return -EINVAL;
> +
> +	/*
> +	 * Serialize the full retry sequence. With the default bounds, a caller
> +	 * may hold the mutex across up to five 20ms backoff sleeps.
> +	 */
> +	guard(mutex)(&cache->lock);
> +
> +	for (unsigned int i = 0; i < SMCCC_CACHE_MAX_RETRIES; i++) {
> +		/* Long firmware operations can trigger watchdog checks. */
> +		touch_nmi_watchdog();
> +
> +		arm_smccc_1_1_invoke(ARM_SMCCC_ARCH_CLEAN_INV_MEMREGION,
> +				     invp->addr, invp->size, 0UL, &res);
> +
> +		ret = smccc_cache_status_to_errno((s32)res.a0);
> +		if (!ret)
> +			return 0;
> +
> +		if (ret != -EBUSY && ret != -EAGAIN)
> +			return ret;
> +
> +		fsleep(delay_us);
> +	}
> +
> +	return ret;
> +}
> +
> +static const struct cache_coherency_ops smccc_cache_ops = {
> +	.wbinv = smccc_cache_wbinv,
> +};
> +
> +static int smccc_cache_probe(struct arm_smccc_device *sdev)
> +{
> +	struct arm_smccc_res res = {};
> +	struct smccc_cache *cache;
> +	int ret;
> +
> +	arm_smccc_1_1_invoke(ARM_SMCCC_ARCH_CLEAN_INV_MEMREGION_ATTRIBUTES,
> +			     &res);
> +	if ((s32)res.a0)
> +		return -ENODEV;
> +
> +	cache = cache_coherency_ops_instance_alloc(&smccc_cache_ops,
> +						   struct smccc_cache, cci);
> +	if (!cache)
> +		return -ENOMEM;
> +
> +	mutex_init(&cache->lock);
> +	cache->rate_limit = res.a3;
> +
> +	ret = cache_coherency_ops_instance_register(&cache->cci);
> +	if (ret) {
> +		mutex_destroy(&cache->lock);
> +		cache_coherency_ops_instance_put(&cache->cci);
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static const struct arm_smccc_device_id smccc_cache_id_table[] = {
> +	{ .func_id = ARM_SMCCC_ARCH_CLEAN_INV_MEMREGION_ATTRIBUTES },
> +	{}
> +};
> +MODULE_DEVICE_TABLE(arm_smccc, smccc_cache_id_table);
> +
> +static struct arm_smccc_driver smccc_cache_driver = {
> +	.name = KBUILD_MODNAME,
> +	.probe = smccc_cache_probe,
> +	.id_table = smccc_cache_id_table,
> +};
> +module_arm_smccc_driver(smccc_cache_driver);
> +
> +MODULE_IMPORT_NS("CACHE_COHERENCY");
> +MODULE_AUTHOR("Srirangan Madhavan");
> +MODULE_DESCRIPTION("Arm SMCCC cache maintenance provider");
> +MODULE_LICENSE("GPL");
> diff --git a/drivers/firmware/smccc/smccc.c b/drivers/firmware/smccc/smccc.c
> index 5dc768ac4143..5a5d50d17410 100644
> --- a/drivers/firmware/smccc/smccc.c
> +++ b/drivers/firmware/smccc/smccc.c
> @@ -100,6 +100,11 @@ static const struct smccc_device_info smccc_devices[] __initconst = {
>  		.requires_smc   = true,
>  		.device_name    = "arm-rsi",
>  	},
> +	{
> +		.func_id        = ARM_SMCCC_ARCH_CLEAN_INV_MEMREGION_ATTRIBUTES,
> +		.requires_smc   = false,
> +		.device_name    = "arm-smccc-cache",
> +	},
>  };
>  
>  static bool __init smccc_probe_smccc_device(const struct smccc_device_info *smccc_dev)
> -- 
> 2.43.0
> 

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

      reply	other threads:[~2026-10-29 23:21 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-21 22:45 [PATCH v5 0/2] Add SMCCC cache clean/invalidate provider Srirangan Madhavan
2026-10-21 22:45 ` [PATCH v5 1/2] arm64: smccc: add cache clean/invalidate IDs and return codes Srirangan Madhavan
2026-10-21 22:45 ` [PATCH v5 2/2] cache: add SMCCC-backed cache invalidate provider Srirangan Madhavan
2026-10-29 23:21   ` Conor Dooley [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261029-feline-monastery-07bf67308136@spud \
    --to=conor@kernel.org \
    --cc=Souvik.Chakravarty@arm.com \
    --cc=andre.przywara@arm.com \
    --cc=aneesh.kumar@kernel.org \
    --cc=bence.csokas@arm.com \
    --cc=catalin.marinas@arm.com \
    --cc=jic23@kernel.org \
    --cc=jonathan.cameron@oss.qualcomm.com \
    --cc=jonathanh@nvidia.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=lpieralisi@kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=smadhavan@nvidia.com \
    --cc=sudeep.holla@kernel.org \
    --cc=treding@nvidia.com \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox