Re: [PATCH v3 6/6] ARM: tegra: Add SOCTHERM support on Tegra114

[Mikko Perttunen <mperttunen@nvidia.com>]

On Wednesday, August 20, 2025 8:42 PM Svyatoslav Ryhel wrote:
> Add SOCTHERM and thermal zones nodes into common Tegra 4 device tree.
> 
> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
> ---
>  arch/arm/boot/dts/nvidia/tegra114.dtsi | 197 +++++++++++++++++++++++++
>  1 file changed, 197 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/nvidia/tegra114.dtsi
> b/arch/arm/boot/dts/nvidia/tegra114.dtsi index 3ee51d7f3935..d9c51e6900d8
> 100644
> --- a/arch/arm/boot/dts/nvidia/tegra114.dtsi
> +++ b/arch/arm/boot/dts/nvidia/tegra114.dtsi
> @@ -5,6 +5,7 @@
>  #include <dt-bindings/pinctrl/pinctrl-tegra.h>
>  #include <dt-bindings/interrupt-controller/arm-gic.h>
>  #include <dt-bindings/reset/tegra114-car.h>
> +#include <dt-bindings/thermal/tegra114-soctherm.h>

't'hermal comes after 's'oc

>  #include <dt-bindings/soc/tegra-pmc.h>
> 
>  / {
> @@ -694,6 +695,46 @@ mipi: mipi@700e3000 {
>  		#nvidia,mipi-calibrate-cells = <1>;
>  	};
> 
> +	soctherm: thermal-sensor@700e2000 {
> +		compatible = "nvidia,tegra114-soctherm";
> +		reg = <0x700e2000 0x600>, /* SOC_THERM reg_base */
> +		      <0x60006000 0x400>; /* CAR reg_base */

Regrettable that the binding has CAR registers here, but that's a pre-existing 
problem and not something we need to fix here.

> +		reg-names = "soctherm-reg", "car-reg";

Same for these names..

> +		interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
> +		interrupt-names = "thermal", "edp";
> +		clocks = <&tegra_car TEGRA114_CLK_TSENSOR>,
> +			 <&tegra_car TEGRA114_CLK_SOC_THERM>;
> +		clock-names = "tsensor", "soctherm";
> +		resets = <&tegra_car 78>;
> +		reset-names = "soctherm";
> +
> +		assigned-clocks = <&tegra_car TEGRA114_CLK_TSENSOR>,
> +				  <&tegra_car TEGRA114_CLK_SOC_THERM>;
> +		assigned-clock-rates = <500000>, <51000000>;
> +
> +		assigned-clock-parents = <&tegra_car TEGRA114_CLK_CLK_M>,
> +					 <&tegra_car TEGRA114_CLK_PLL_P>;
> +
> +		#thermal-sensor-cells = <1>;
> +
> +		throttle-cfgs {
> +			throttle_heavy: heavy {
> +				nvidia,priority = <100>;
> +				nvidia,cpu-throt-percent = <80>;
> +				nvidia,gpu-throt-level = 
<TEGRA_SOCTHERM_THROT_LEVEL_HIGH>;

As mentioned elsewhere, these should have TEGRA114 prefixes.

> +				#cooling-cells = <2>;
> +			};
> +
> +			throttle_light: light {
> +				nvidia,priority = <80>;
> +				nvidia,cpu-throt-percent = <50>;
> +				nvidia,gpu-throt-level = 
<TEGRA_SOCTHERM_THROT_LEVEL_MED>;
> +				#cooling-cells = <2>;
> +			};
> +		};
> +	};
> +
>  	dfll: clock@70110000 {
>  		compatible = "nvidia,tegra114-dfll";
>  		reg = <0x70110000 0x100>, /* DFLL control */
> @@ -858,24 +899,28 @@ cpu0: cpu@0 {
>  			clock-names = "cpu_g", "cpu_lp", "pll_x", "pll_p", 
"dfll";
>  			/* FIXME: what's the actual transition time? */
>  			clock-latency = <300000>;
> +			#cooling-cells = <2>;
>  		};
> 
>  		cpu1: cpu@1 {
>  			device_type = "cpu";
>  			compatible = "arm,cortex-a15";
>  			reg = <1>;
> +			#cooling-cells = <2>;
>  		};
> 
>  		cpu2: cpu@2 {
>  			device_type = "cpu";
>  			compatible = "arm,cortex-a15";
>  			reg = <2>;
> +			#cooling-cells = <2>;
>  		};
> 
>  		cpu3: cpu@3 {
>  			device_type = "cpu";
>  			compatible = "arm,cortex-a15";
>  			reg = <3>;
> +			#cooling-cells = <2>;
>  		};
>  	};
> 
> @@ -888,6 +933,158 @@ pmu {
>  		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
>  	};
> 
> +	thermal-zones {
> +		cpu-thermal {
> +			polling-delay-passive = <1000>;
> +			polling-delay = <1000>;
> +
> +			thermal-sensors =
> +				<&soctherm TEGRA114_SOCTHERM_SENSOR_CPU>;
> +
> +			trips {
> +				cpu-shutdown-trip {
> +					temperature = <102000>;
> +					hysteresis = <0>;
> +					type = "critical";
> +				};
> +
> +				cpu_throttle_trip: cpu-throttle-trip {
> +					temperature = <100000>;
> +					hysteresis = <1000>;
> +					type = "hot";
> +				};
> +
> +				cpu_balanced_trip: cpu-balanced-trip {
> +					temperature = <90000>;
> +					hysteresis = <1000>;
> +					type = "passive";
> +				};
> +			};
> +
> +			cooling-maps {
> +				map0 {
> +					trip = <&cpu_throttle_trip>;
> +					cooling-device = <&throttle_heavy 
1 1>;
> +				};
> +
> +				map1 {
> +					trip = <&cpu_balanced_trip>;
> +					cooling-device = <&throttle_light 
1 1>;
> +				};
> +			};
> +		};
> +
> +		mem-thermal {
> +			polling-delay-passive = <1000>;
> +			polling-delay = <1000>;
> +
> +			thermal-sensors =
> +				<&soctherm TEGRA114_SOCTHERM_SENSOR_MEM>;
> +
> +			trips {
> +				mem-shutdown-trip {
> +					temperature = <102000>;
> +					hysteresis = <0>;
> +					type = "critical";
> +				};
> +
> +				mem_throttle_trip: mem-throttle-trip {
> +					temperature = <100000>;
> +					hysteresis = <1000>;
> +					type = "hot";
> +				};
> +
> +				mem_balanced_trip: mem-balanced-trip {
> +					temperature = <90000>;
> +					hysteresis = <1000>;
> +					type = "passive";
> +				};
> +			};
> +
> +			cooling-maps {
> +				/*
> +				 * There are currently no cooling maps,
> +				 * because there are no cooling devices.
> +				 */
> +			};
> +		};
> +
> +		gpu-thermal {
> +			polling-delay-passive = <1000>;
> +			polling-delay = <1000>;
> +
> +			thermal-sensors =
> +				<&soctherm TEGRA114_SOCTHERM_SENSOR_GPU>;
> +
> +			trips {
> +				gpu-shutdown-trip {
> +					temperature = <102000>;
> +					hysteresis = <0>;
> +					type = "critical";
> +				};
> +
> +				gpu_throttle_trip: gpu-throttle-trip {
> +					temperature = <100000>;
> +					hysteresis = <1000>;
> +					type = "hot";
> +				};
> +
> +				gpu_balanced_trip: gpu-balanced-trip {
> +					temperature = <90000>;
> +					hysteresis = <1000>;
> +					type = "passive";
> +				};
> +			};
> +
> +			cooling-maps {
> +				map0 {
> +					trip = <&gpu_throttle_trip>;
> +					cooling-device = <&throttle_heavy 
1 1>;
> +				};
> +
> +				map1 {
> +					trip = <&gpu_balanced_trip>;
> +					cooling-device = <&throttle_light 
1 1>;
> +				};
> +			};
> +		};
> +
> +		pllx-thermal {
> +			polling-delay-passive = <1000>;
> +			polling-delay = <1000>;
> +
> +			thermal-sensors =
> +				<&soctherm TEGRA114_SOCTHERM_SENSOR_PLLX>;
> +
> +			trips {
> +				pllx-shutdown-trip {
> +					temperature = <102000>;
> +					hysteresis = <0>;
> +					type = "critical";
> +				};
> +
> +				pllx_throttle_trip: pllx-throttle-trip {
> +					temperature = <100000>;
> +					hysteresis = <1000>;
> +					type = "hot";
> +				};
> +
> +				pllx_balanced_trip: pllx-balanced-trip {
> +					temperature = <90000>;
> +					hysteresis = <1000>;
> +					type = "passive";
> +				};
> +			};
> +
> +			cooling-maps {
> +				/*
> +				 * There are currently no cooling maps,
> +				 * because there are no cooling devices.
> +				 */
> +			};
> +		};
> +	};
> +
>  	timer {
>  		compatible = "arm,armv7-timer";
>  		interrupts =