Re: [PATCH 2/3] ARM: tegra: harmony: initialize the TPS65862 PMIC

[Mike Rapoport <mike-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org>]

On 03/09/11 00:12, Marc Dietrich wrote:
> Hi Mike,
> 
> Am Dienstag 08 März 2011, um 13:58:58 schrieb Mike Rapoport:
>> Signed-off-by: Mike Rapoport <mike-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org>
>> ---
>>  arch/arm/mach-tegra/Makefile              |    1 +
>>  arch/arm/mach-tegra/board-harmony-power.c |  161 +++++++++++++++++++++++++++++
>>  arch/arm/mach-tegra/board-harmony.c       |    1 +
>>  arch/arm/mach-tegra/board-harmony.h       |    1 +
>>  4 files changed, 164 insertions(+), 0 deletions(-)
>>  create mode 100644 arch/arm/mach-tegra/board-harmony-power.c
> 
> ...
>>
>> diff --git a/arch/arm/mach-tegra/board-harmony-power.c b/arch/arm/mach-tegra/board-harmony-power.c
>> new file mode 100644
>> index 0000000..ca43d7a
>> --- /dev/null
>> +++ b/arch/arm/mach-tegra/board-harmony-power.c
> ...
>> +static struct i2c_board_info __initdata harmony_regulators[] = {
>> +	{
>> +		I2C_BOARD_INFO("tps6586x", 0x34),
>> +		.irq		= INT_EXTERNAL_PMU,
>> +		.platform_data	= &tps_platform,
>> +	},
>> +};
>> +
>> +int __init harmony_regulator_init(void)
>> +{
>> +	i2c_register_board_info(3, harmony_regulators, 1);
> 
> I don't know harmony well, but are you sure this is 3, not 4, as on all other boards?

In the mainline version of i2c-tegra the adapter (and therefore bus) number
equals the platform device id, and in case of DVC adapter it's 3.

> 
> Marc


-- 
Sincerely yours,
Mike.
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html