[PATCH v2 2/6] ARM: tegra: select CPU_FREQ_TABLE

[PATCH v2 2/6] ARM: tegra: select CPU_FREQ_TABLE

[Alan Ott]

From: Arnd Bergmann <arnd@arndb.de>

The tegra cpufreq implementation relies on the cpu_freq_table
code, so make sure that this is always there when needed.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alan Ott <alan@signal11.us>
---
 arch/arm/mach-tegra/Kconfig |    2 ++
 1 files changed, 2 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
index 373652d..60f3e4b 100644
--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig
@@ -10,6 +10,7 @@ config ARCH_TEGRA_2x_SOC
 	select USB_ARCH_HAS_EHCI if USB_SUPPORT
 	select USB_ULPI if USB_SUPPORT
 	select USB_ULPI_VIEWPORT if USB_SUPPORT
+	select CPU_FREQ_TABLE if CPU_FREQ
 	help
 	  Support for NVIDIA Tegra AP20 and T20 processors, based on the
 	  ARM CortexA9MP CPU and the ARM PL310 L2 cache controller
@@ -23,6 +24,7 @@ config ARCH_TEGRA_3x_SOC
 	select USB_ULPI if USB_SUPPORT
 	select USB_ULPI_VIEWPORT if USB_SUPPORT
 	select USE_OF
+	select CPU_FREQ_TABLE if CPU_FREQ
 	help
 	  Support for NVIDIA Tegra T30 processor family, based on the
 	  ARM CortexA9MP CPU and the ARM PL310 L2 cache controller
-- 
1.7.0.4

Re: [PATCH v2 2/6] ARM: tegra: select CPU_FREQ_TABLE

[Olof Johansson]

On Fri, Mar 02, 2012 at 03:58:28PM -0500, Alan Ott wrote:
> From: Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>
> 
> The tegra cpufreq implementation relies on the cpu_freq_table
> code, so make sure that this is always there when needed.
> 
> Signed-off-by: Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>
> Signed-off-by: Alan Ott <alan-yzvJWuRpmD1zbRFIqnYvSA@public.gmane.org>

This didn't apply cleanly to the tegra tree (what was it based on?), but
I fixed it up manually and applied to for-3.4/cleanups-and-fixes.


Thanks,

-Olof

Re: [PATCH v2 2/6] ARM: tegra: select CPU_FREQ_TABLE

[Alan Ott]

On 3/4/12 1:37 PM, Olof Johansson wrote:
> On Fri, Mar 02, 2012 at 03:58:28PM -0500, Alan Ott wrote:
>> From: Arnd Bergmann<arnd-r2nGTMty4D4@public.gmane.org>
>>
>> The tegra cpufreq implementation relies on the cpu_freq_table
>> code, so make sure that this is always there when needed.
>>
>> Signed-off-by: Arnd Bergmann<arnd-r2nGTMty4D4@public.gmane.org>
>> Signed-off-by: Alan Ott<alan-yzvJWuRpmD1zbRFIqnYvSA@public.gmane.org>
>
> This didn't apply cleanly to the tegra tree (what was it based on?), but
> I fixed it up manually and applied to for-3.4/cleanups-and-fixes.
>

These were based on mainline.

Alan.