From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stephen Warren Subject: Re: [PATCH] ARM: dt: tegra: add Whistler device tree file Date: Mon, 04 Jun 2012 11:55:39 -0600 Message-ID: <4FCCF69B.2050609@wwwdotorg.org> References: <1337295233-14575-1-git-send-email-swarren@wwwdotorg.org> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1337295233-14575-1-git-send-email-swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org> Sender: linux-tegra-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Olof Johansson , Colin Cross Cc: Mark Brown , linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, Stephen Warren List-Id: linux-tegra@vger.kernel.org On 05/17/2012 04:53 PM, Stephen Warren wrote: > Whistler is a highly configurable Tegra evaluation and development board. > This change adds support for the following specific configuration: > > E1120 motherboard > E1108 CPU board > E1116 PMU board > > The motherboard configuration switches are set as follows: > SW1=0 SW2=0 SW3=5 > S1/S2/S3/S4 all on, except S3 7/8 are off. > > Other combinations of daugher boards may work to varying degrees, but will > likely require some SW adjustment. Applied for 3.6.