From: "Terje Bergström" <tbergstrom-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
To: Thierry Reding
<thierry.reding-RM9K5IK7kjKj5M59NBduVrNAH6kLmebB@public.gmane.org>
Cc: Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>,
"linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
<linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
"linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
<linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>
Subject: Re: [PATCH 1/2] ARM: tegra: Add Tegra20 host1x support
Date: Wed, 14 Nov 2012 17:29:33 +0200 [thread overview]
Message-ID: <50A3B8DD.7010607@nvidia.com> (raw)
In-Reply-To: <20121114150125.GA11050-RM9K5IK7kjIQXX3q8xo1gnVAuStQJXxyR5q1nwbD4aMs9pC9oP6+/A@public.gmane.org>
On 14.11.2012 17:01, Thierry Reding wrote:
> Funny. I just tested with this line removed and I also get the freeze.
> With the line I don't get the freeze. Does the freeze only occur with
> additional patches on top? If so I think we should keep the line in for
> now because it is what most people have tested against and which has
> proven to work. We can fix any remaining issues with host1x specific
> things when actual patches emerge.
I was running with 2D acceleration support added on top of your
gitorious tree. It was the nvhost driver, which probes host1x, and
initializes it. In middle of initialization (writing zeros to sync point
registers), host1x stops responding.
I agree, if removing the line causes regression, keep it and let's debug
this issue later.
It might be that we have a difference in bootloader. Does your
bootloader enable display? U-Boot and fastboot do, and it might be that
has an effect. They would need to initialize host1x clocks, and it might
be that kernel initialization somehow clashes with bootloader's.
Best regards,
Terje
next prev parent reply other threads:[~2012-11-14 15:29 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-09 13:20 [PATCH 0/2] Device tree updates for host1x support Thierry Reding
2012-11-09 13:20 ` [PATCH 1/2] ARM: tegra: Add Tegra20 " Thierry Reding
[not found] ` <1352467202-27903-2-git-send-email-thierry.reding-RM9K5IK7kjKj5M59NBduVrNAH6kLmebB@public.gmane.org>
2012-11-12 9:39 ` Mark Zhang
[not found] ` <50A0C3BF.90509-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2012-11-13 4:38 ` Mark Zhang
[not found] ` <50A1CECA.3090804-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2012-11-13 6:41 ` Thierry Reding
[not found] ` <20121113064135.GA31443-RM9K5IK7kjIQXX3q8xo1gnVAuStQJXxyR5q1nwbD4aMs9pC9oP6+/A@public.gmane.org>
2012-11-13 7:37 ` Mark Zhang
2012-11-14 8:35 ` Terje Bergström
[not found] ` <50A357D3.9080002-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2012-11-14 8:49 ` Thierry Reding
[not found] ` <20121114084931.GA31837-RM9K5IK7kjIQXX3q8xo1gnVAuStQJXxyR5q1nwbD4aMs9pC9oP6+/A@public.gmane.org>
2012-11-14 10:23 ` Terje Bergström
[not found] ` <50A3712E.7000104-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2012-11-14 10:54 ` Thierry Reding
2012-11-14 16:19 ` Stephen Warren
[not found] ` <50A3C485.7080704-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2012-11-14 16:45 ` Terje Bergström
[not found] ` <50A3CAA3.2060908-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2012-11-14 18:12 ` Stephen Warren
2012-11-14 20:04 ` Thierry Reding
[not found] ` <20121114200415.GA10335-RM9K5IK7kjIQXX3q8xo1gnVAuStQJXxyR5q1nwbD4aMs9pC9oP6+/A@public.gmane.org>
2012-11-14 20:15 ` Stephen Warren
[not found] ` <50A3FBFA.3080008-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2012-11-14 20:21 ` Thierry Reding
2012-11-15 6:56 ` Terje Bergström
2012-11-15 7:11 ` Thierry Reding
2012-11-14 15:01 ` Thierry Reding
[not found] ` <20121114150125.GA11050-RM9K5IK7kjIQXX3q8xo1gnVAuStQJXxyR5q1nwbD4aMs9pC9oP6+/A@public.gmane.org>
2012-11-14 15:29 ` Terje Bergström [this message]
[not found] ` <50A3B8DD.7010607-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2012-11-14 15:33 ` Thierry Reding
2012-11-13 7:45 ` Mark Zhang
[not found] ` <50A1FA7C.4010507-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2012-11-13 7:52 ` Thierry Reding
[not found] ` <20121113075247.GB8409-RM9K5IK7kjIQXX3q8xo1gnVAuStQJXxyR5q1nwbD4aMs9pC9oP6+/A@public.gmane.org>
2012-11-13 8:00 ` Mark Zhang
[not found] ` <50A1FE2F.8000107-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2012-11-13 8:04 ` Thierry Reding
2012-11-13 8:29 ` Mark Zhang
2012-11-09 13:20 ` [PATCH 2/2] ARM: tegra: Add Tegra30 " Thierry Reding
[not found] ` <1352467202-27903-3-git-send-email-thierry.reding-RM9K5IK7kjKj5M59NBduVrNAH6kLmebB@public.gmane.org>
2012-11-13 4:37 ` Mark Zhang
2012-11-13 7:45 ` Mark Zhang
[not found] ` <50A1FAB0.8040700-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2012-11-13 7:53 ` Thierry Reding
[not found] ` <1352467202-27903-1-git-send-email-thierry.reding-RM9K5IK7kjKj5M59NBduVrNAH6kLmebB@public.gmane.org>
2012-11-09 17:34 ` [PATCH 0/2] Device tree updates for " Stephen Warren
[not found] ` <509D3EB1.8040703-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2012-11-09 18:44 ` Thierry Reding
[not found] ` <20121109184409.GB7663-RM9K5IK7kjIQXX3q8xo1gnVAuStQJXxyR5q1nwbD4aMs9pC9oP6+/A@public.gmane.org>
2012-11-09 21:10 ` Stephen Warren
[not found] ` <509D7145.9000203-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2012-11-15 8:21 ` Prashant Gaikwad
2012-11-15 8:50 ` Thierry Reding
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50A3B8DD.7010607@nvidia.com \
--to=tbergstrom-ddmlm1+adcrqt0dzr+alfa@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org \
--cc=thierry.reding-RM9K5IK7kjKj5M59NBduVrNAH6kLmebB@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).