* [PATCH] ARM: tegra30: tegra30 gpio is not compatible with tegra20 gpio
@ 2012-12-19 14:57 Laxman Dewangan
[not found] ` <1355929032-26549-1-git-send-email-ldewangan-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
0 siblings, 1 reply; 4+ messages in thread
From: Laxman Dewangan @ 2012-12-19 14:57 UTC (permalink / raw)
To: swarren-3lzwWm7+Weoh9ZMKESR00Q
Cc: linux-lFZ/pmaqli7XmaaqVzeoHQ, linux-tegra-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, Laxman Dewangan
tegra30 gpio controller is not compatible with the tegra20 due to
their bank stride i.e. Tegra20 bank stride is 0x80 where Tegra30
bank stride is 0x100.
Signed-off-by: Laxman Dewangan <ldewangan-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
---
arch/arm/boot/dts/tegra30.dtsi | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index 80a0edf..dfa9f57 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -176,7 +176,7 @@
};
gpio: gpio {
- compatible = "nvidia,tegra30-gpio", "nvidia,tegra20-gpio";
+ compatible = "nvidia,tegra30-gpio"
reg = <0x6000d000 0x1000>;
interrupts = <0 32 0x04
0 33 0x04
--
1.7.1.1
^ permalink raw reply related [flat|nested] 4+ messages in thread[parent not found: <1355929032-26549-1-git-send-email-ldewangan-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>]
* Re: [PATCH] ARM: tegra30: tegra30 gpio is not compatible with tegra20 gpio [not found] ` <1355929032-26549-1-git-send-email-ldewangan-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org> @ 2012-12-19 17:04 ` Stephen Warren [not found] ` <50D1F385.7000506-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org> 2013-01-02 19:07 ` Stephen Warren 1 sibling, 1 reply; 4+ messages in thread From: Stephen Warren @ 2012-12-19 17:04 UTC (permalink / raw) To: Laxman Dewangan Cc: linux-lFZ/pmaqli7XmaaqVzeoHQ, linux-tegra-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-kernel-u79uwXL29TY76Z2rM5mHXA On 12/19/2012 07:57 AM, Laxman Dewangan wrote: > tegra30 gpio controller is not compatible with the tegra20 due to > their bank stride i.e. Tegra20 bank stride is 0x80 where Tegra30 > bank stride is 0x100. Thanks, I've been meaning to clean this up for a while, but never got around to it. I can apply after the merge window is closed; I don't think it's important enough to warrant going into 3.8 or earlier, since it doesn't cause any active problems. Have you checked all the other devices to make sure they're all correct to? ^ permalink raw reply [flat|nested] 4+ messages in thread
[parent not found: <50D1F385.7000506-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>]
* Re: [PATCH] ARM: tegra30: tegra30 gpio is not compatible with tegra20 gpio [not found] ` <50D1F385.7000506-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org> @ 2012-12-20 6:16 ` Laxman Dewangan 0 siblings, 0 replies; 4+ messages in thread From: Laxman Dewangan @ 2012-12-20 6:16 UTC (permalink / raw) To: Stephen Warren Cc: linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org, linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org On Wednesday 19 December 2012 10:34 PM, Stephen Warren wrote: > On 12/19/2012 07:57 AM, Laxman Dewangan wrote: >> tegra30 gpio controller is not compatible with the tegra20 due to >> their bank stride i.e. Tegra20 bank stride is 0x80 where Tegra30 >> bank stride is 0x100. > Thanks, I've been meaning to clean this up for a while, but never got > around to it. I can apply after the merge window is closed; I don't > think it's important enough to warrant going into 3.8 or earlier, since > it doesn't cause any active problems. > > Have you checked all the other devices to make sure they're all correct to? Not yet, I am going one by one for finding if anything we are missing on IO drivers or not and then came across this. ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] ARM: tegra30: tegra30 gpio is not compatible with tegra20 gpio [not found] ` <1355929032-26549-1-git-send-email-ldewangan-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org> 2012-12-19 17:04 ` Stephen Warren @ 2013-01-02 19:07 ` Stephen Warren 1 sibling, 0 replies; 4+ messages in thread From: Stephen Warren @ 2013-01-02 19:07 UTC (permalink / raw) To: Laxman Dewangan Cc: linux-lFZ/pmaqli7XmaaqVzeoHQ, linux-tegra-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-kernel-u79uwXL29TY76Z2rM5mHXA On 12/19/2012 07:57 AM, Laxman Dewangan wrote: > tegra30 gpio controller is not compatible with the tegra20 due to > their bank stride i.e. Tegra20 bank stride is 0x80 where Tegra30 > bank stride is 0x100. Applied to Tegra's for-3.9/dt branch. ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2013-01-02 19:07 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-12-19 14:57 [PATCH] ARM: tegra30: tegra30 gpio is not compatible with tegra20 gpio Laxman Dewangan
[not found] ` <1355929032-26549-1-git-send-email-ldewangan-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2012-12-19 17:04 ` Stephen Warren
[not found] ` <50D1F385.7000506-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2012-12-20 6:16 ` Laxman Dewangan
2013-01-02 19:07 ` Stephen Warren
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).