From: Prashant Gaikwad <pgaikwad-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
To: Peter De Schrijver
<pdeschrijver-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
Cc: Russell King <linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org>,
"linux-doc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
<linux-doc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
"linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
<linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
Rob Herring <rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org>,
Joseph Lo <josephl-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>,
"linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
<linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
Mike Turquette
<mturquette-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
"devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org"
<devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org>,
"linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org"
<linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org>
Subject: Re: [PATCH v5 01/10] clk: tegra: Refactor PLL programming code
Date: Mon, 4 Feb 2013 11:36:47 +0530 [thread overview]
Message-ID: <510F4FF7.3050502@nvidia.com> (raw)
In-Reply-To: <1359713962-16822-2-git-send-email-pdeschrijver-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
On Friday 01 February 2013 03:48 PM, Peter De Schrijver wrote:
> Refactor the PLL programming code to make it useable by the new PLL types
> introduced by Tegra114.
>
> The following changes were done:
>
> * Split programming the PLL into updating m,n,p and updating cpcon
> * Move locking from _update_pll_cpcon() to clk_pll_set_rate()
> * Introduce _get_pll_mnp() helper
> * Move check for identical m,n,p values to clk_pll_set_rate()
> * struct tegra_clk_pll_freq_table will always contain the values as defined
> by the hardware.
> * Simplify the arguments to clk_pll_wait_for_lock()
>
> Signed-off-by: Peter De Schrijver <pdeschrijver-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
> ---
> drivers/clk/tegra/clk-pll.c | 178 +++++++++++++++++------------
> drivers/clk/tegra/clk-tegra20.c | 144 ++++++++++++------------
> drivers/clk/tegra/clk-tegra30.c | 234 +++++++++++++++++++-------------------
> 3 files changed, 294 insertions(+), 262 deletions(-)
>
> diff --git a/drivers/clk/tegra/clk-pll.c b/drivers/clk/tegra/clk-pll.c
> index 165f247..912c977 100644
> --- a/drivers/clk/tegra/clk-pll.c
> +++ b/drivers/clk/tegra/clk-pll.c
> @@ -1,5 +1,5 @@
> /*
> - * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved.
> + * Copyright (c) 2012, 2013, NVIDIA CORPORATION. All rights reserved.
> *
> * This program is free software; you can redistribute it and/or modify it
> * under the terms and conditions of the GNU General Public License,
> @@ -113,20 +113,23 @@ static void clk_pll_enable_lock(struct tegra_clk_pll *pll)
> pll_writel_misc(val, pll);
> }
>
> -static int clk_pll_wait_for_lock(struct tegra_clk_pll *pll,
> - void __iomem *lock_addr, u32 lock_bit_idx)
> +static int clk_pll_wait_for_lock(struct tegra_clk_pll *pll)
> {
> int i;
> - u32 val;
> + u32 val, lock_bit;
> + void __iomem *lock_addr;
>
> if (!(pll->flags & TEGRA_PLL_USE_LOCK)) {
> udelay(pll->params->lock_delay);
> return 0;
> }
>
> + lock_addr = pll->clk_base + pll->params->base_reg;
This will not work for PLLE. Lock bit for PLLE is in misc register.
> + lock_bit = BIT(pll->params->lock_bit_idx);
> +
> for (i = 0; i < pll->params->lock_delay; i++) {
> val = readl_relaxed(lock_addr);
> - if (val & BIT(lock_bit_idx)) {
> + if (val & lock_bit) {
Need to change the lock bit idx parameter for Tegra20 and Tegra30 PLLs
else this patch will break those.
> udelay(PLL_POST_LOCK_DELAY);
> return 0;
> }
> @@ -155,7 +158,7 @@ static int clk_pll_is_enabled(struct clk_hw *hw)
> return val & PLL_BASE_ENABLE ? 1 : 0;
> }
<snip>
> @@ -538,8 +570,8 @@ static int clk_plle_enable(struct clk_hw *hw)
> val |= (PLL_BASE_BYPASS | PLL_BASE_ENABLE);
> pll_writel_base(val, pll);
>
> - clk_pll_wait_for_lock(pll, pll->clk_base + pll->params->misc_reg,
> - pll->params->lock_bit_idx);
> + clk_pll_wait_for_lock(pll);
> +
> return 0;
> }
<snip>
> static struct tegra_clk_pll_freq_table pll_x_freq_table[] = {
> /* 1.7 GHz */
> - { 12000000, 1700000000, 850, 6, 1, 8},
> - { 13000000, 1700000000, 915, 7, 1, 8}, /* actual: 1699.2 MHz */
> - { 16800000, 1700000000, 708, 7, 1, 8}, /* actual: 1699.2 MHz */
> - { 19200000, 1700000000, 885, 10, 1, 8}, /* actual: 1699.2 MHz */
> - { 26000000, 1700000000, 850, 13, 1, 8},
> + { 12000000, 1700000000, 850, 6, 0, 8},
> + { 13000000, 1700000000, 915, 7, 0, 8}, /* actual: 1699.2 MHz */
> + { 16800000, 1700000000, 708, 7, 0, 8}, /* actual: 1699.2 MHz */
> + { 19200000, 1700000000, 885, 10, 0, 8}, /* actual: 1699.2 MHz */
> + { 26000000, 1700000000, 850, 13, 0, 8},
>
> /* 1.6 GHz */
> - { 12000000, 1600000000, 800, 6, 1, 8},
> - { 13000000, 1600000000, 738, 6, 1, 8}, /* actual: 1599.0 MHz */
> - { 16800000, 1600000000, 857, 9, 1, 8}, /* actual: 1599.7 MHz */
> - { 19200000, 1600000000, 500, 6, 1, 8},
> - { 26000000, 1600000000, 800, 13, 1, 8},
> + { 12000000, 1600000000, 800, 6, 0, 8},
> + { 13000000, 1600000000, 738, 6, 0, 8}, /* actual: 1599.0 MHz */
> + { 16800000, 1600000000, 857, 9, 0, 8}, /* actual: 1599.7 MHz */
> + { 19200000, 1600000000, 500, 6, 0, 8},
> + { 26000000, 1600000000, 800, 13, 0, 8},
>
> /* 1.5 GHz */
> - { 12000000, 1500000000, 750, 6, 1, 8},
> - { 13000000, 1500000000, 923, 8, 1, 8}, /* actual: 1499.8 MHz */
> - { 16800000, 1500000000, 625, 7, 1, 8},
> - { 19200000, 1500000000, 625, 8, 1, 8},
> - { 26000000, 1500000000, 750, 13, 1, 8},
> + { 12000000, 1500000000, 750, 6, 0, 8},
> + { 13000000, 1500000000, 923, 8, 0, 8}, /* actual: 1499.8 MHz */
> + { 16800000, 1500000000, 625, 7, 0, 8},
> + { 19200000, 1500000000, 625, 8, 0, 8},
> + { 26000000, 1500000000, 750, 13, 0, 8},
>
> /* 1.4 GHz */
> - { 12000000, 1400000000, 700, 6, 1, 8},
> - { 13000000, 1400000000, 969, 9, 1, 8}, /* actual: 1399.7 MHz */
> - { 16800000, 1400000000, 1000, 12, 1, 8},
> - { 19200000, 1400000000, 875, 12, 1, 8},
> - { 26000000, 1400000000, 700, 13, 1, 8},
> + { 12000000, 1400000000, 700, 6, 0, 8},
> + { 13000000, 1400000000, 969, 9, 0, 8}, /* actual: 1399.7 MHz */
> + { 16800000, 1400000000, 1000, 12, 0, 8},
> + { 19200000, 1400000000, 875, 12, 0, 8},
> + { 26000000, 1400000000, 700, 13, 0, 8},
>
> /* 1.3 GHz */
> - { 12000000, 1300000000, 975, 9, 1, 8},
> - { 13000000, 1300000000, 1000, 10, 1, 8},
> - { 16800000, 1300000000, 928, 12, 1, 8}, /* actual: 1299.2 MHz */
> - { 19200000, 1300000000, 812, 12, 1, 8}, /* actual: 1299.2 MHz */
> - { 26000000, 1300000000, 650, 13, 1, 8},
> + { 12000000, 1300000000, 975, 9, 0, 8},
> + { 13000000, 1300000000, 1000, 10, 0, 8},
> + { 16800000, 1300000000, 928, 12, 0, 8}, /* actual: 1299.2 MHz */
> + { 19200000, 1300000000, 812, 12, 0, 8}, /* actual: 1299.2 MHz */
> + { 26000000, 1300000000, 650, 13, 0, 8},
>
> /* 1.2 GHz */
> - { 12000000, 1200000000, 1000, 10, 1, 8},
> - { 13000000, 1200000000, 923, 10, 1, 8}, /* actual: 1199.9 MHz */
> - { 16800000, 1200000000, 1000, 14, 1, 8},
> - { 19200000, 1200000000, 1000, 16, 1, 8},
> - { 26000000, 1200000000, 600, 13, 1, 8},
> + { 12000000, 1200000000, 1000, 10, 0, 8},
> + { 13000000, 1200000000, 923, 10, 0, 8}, /* actual: 1199.9 MHz */
> + { 16800000, 1200000000, 1000, 14, 0, 8},
> + { 19200000, 1200000000, 1000, 16, 0, 8},
> + { 26000000, 1200000000, 600, 13, 0, 8},
>
> /* 1.1 GHz */
> - { 12000000, 1100000000, 825, 9, 1, 8},
> - { 13000000, 1100000000, 846, 10, 1, 8}, /* actual: 1099.8 MHz */
> - { 16800000, 1100000000, 982, 15, 1, 8}, /* actual: 1099.8 MHz */
> - { 19200000, 1100000000, 859, 15, 1, 8}, /* actual: 1099.5 MHz */
> - { 26000000, 1100000000, 550, 13, 1, 8},
> + { 12000000, 1100000000, 825, 9, 0, 8},
> + { 13000000, 1100000000, 846, 10, 0, 8}, /* actual: 1099.8 MHz */
> + { 16800000, 1100000000, 982, 15, 0, 8}, /* actual: 1099.8 MHz */
> + { 19200000, 1100000000, 859, 15, 0, 8}, /* actual: 1099.5 MHz */
> + { 26000000, 1100000000, 550, 13, 0, 8},
>
> /* 1 GHz */
> - { 12000000, 1000000000, 1000, 12, 1, 8},
> - { 13000000, 1000000000, 1000, 13, 1, 8},
> - { 16800000, 1000000000, 833, 14, 1, 8}, /* actual: 999.6 MHz */
> - { 19200000, 1000000000, 625, 12, 1, 8},
> - { 26000000, 1000000000, 1000, 26, 1, 8},
> + { 12000000, 1000000000, 1000, 12, 0, 8},
> + { 13000000, 1000000000, 1000, 13, 0, 8},
> + { 16800000, 1000000000, 833, 14, 0, 8}, /* actual: 999.6 MHz */
> + { 19200000, 1000000000, 625, 12, 0, 8},
> + { 26000000, 1000000000, 1000, 26, 0, 8},
>
> { 0, 0, 0, 0, 0, 0 },
> };
>
next prev parent reply other threads:[~2013-02-04 6:06 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-01 10:18 [PATCH v5 00/10] Tegra114 clockframework Peter De Schrijver
[not found] ` <1359713962-16822-1-git-send-email-pdeschrijver-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2013-02-01 10:18 ` [PATCH v5 01/10] clk: tegra: Refactor PLL programming code Peter De Schrijver
[not found] ` <1359713962-16822-2-git-send-email-pdeschrijver-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2013-02-04 6:06 ` Prashant Gaikwad [this message]
2013-02-04 14:32 ` Peter De Schrijver
2013-02-05 5:42 ` Prashant Gaikwad
[not found] ` <51109BB3.8000706-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2013-02-05 13:23 ` Peter De Schrijver
[not found] ` <20130205132355.GD3073-Rysk9IDjsxmJz7etNGeUX8VPkgjIgRvpAL8bYrjMMd8@public.gmane.org>
2013-02-06 12:32 ` Peter De Schrijver
2013-02-04 21:57 ` Stephen Warren
2013-02-01 10:18 ` [PATCH v5 02/10] clk: tegra: Add TEGRA_PLL_BYPASS flag Peter De Schrijver
[not found] ` <1359713962-16822-3-git-send-email-pdeschrijver-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2013-02-04 6:13 ` Prashant Gaikwad
2013-02-01 10:18 ` [PATCH v5 04/10] clk: tegra: Add new fields and PLL types for Tegra114 Peter De Schrijver
[not found] ` <1359713962-16822-5-git-send-email-pdeschrijver-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2013-02-01 19:40 ` Rhyland Klein
[not found] ` <510C1A2E.5010408-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2013-02-04 6:35 ` Prashant Gaikwad
[not found] ` <510F56B1.5060409-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2013-02-04 10:37 ` Peter De Schrijver
2013-02-01 10:18 ` [PATCH v5 05/10] clk: tegra: Add flags to tegra_clk_periph() Peter De Schrijver
[not found] ` <1359713962-16822-6-git-send-email-pdeschrijver-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2013-02-04 6:33 ` Prashant Gaikwad
2013-02-01 10:18 ` [PATCH v5 06/10] clk: tegra: Workaround for Tegra114 MSENC problem Peter De Schrijver
2013-02-04 6:39 ` Prashant Gaikwad
2013-02-01 10:18 ` [PATCH v5 07/10] ARM: tegra: Define Tegra114 CAR binding Peter De Schrijver
2013-02-04 21:16 ` Stephen Warren
2013-02-01 10:18 ` [PATCH v5 08/10] ARM: dt: Add references to tegra_car clocks Peter De Schrijver
2013-02-04 6:45 ` Prashant Gaikwad
2013-02-01 10:18 ` [PATCH v5 10/10] clk: tegra: devicetree match for nvidia,tegra114-car Peter De Schrijver
2013-02-04 7:10 ` Prashant Gaikwad
2013-02-01 10:18 ` [PATCH v5 03/10] clk: tegra: Add PLL post divider table Peter De Schrijver
[not found] ` <1359713962-16822-4-git-send-email-pdeschrijver-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2013-02-04 6:28 ` Prashant Gaikwad
2013-02-01 10:18 ` [PATCH v5 09/10] clk: tegra: Implement clocks for Tegra114 Peter De Schrijver
2013-02-04 7:08 ` Prashant Gaikwad
[not found] ` <510F5E87.90801-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2013-02-04 10:45 ` Peter De Schrijver
[not found] ` <20130204104531.GQ2364-Rysk9IDjsxmJz7etNGeUX8VPkgjIgRvpAL8bYrjMMd8@public.gmane.org>
2013-02-04 14:07 ` Peter De Schrijver
2013-02-04 21:01 ` Stephen Warren
2013-02-07 16:18 ` Peter De Schrijver
2013-02-04 14:34 ` Peter De Schrijver
[not found] ` <20130204143401.GW2364-Rysk9IDjsxmJz7etNGeUX8VPkgjIgRvpAL8bYrjMMd8@public.gmane.org>
2013-02-05 5:36 ` Prashant Gaikwad
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=510F4FF7.3050502@nvidia.com \
--to=pgaikwad-ddmlm1+adcrqt0dzr+alfa@public.gmane.org \
--cc=devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org \
--cc=josephl-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-doc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org \
--cc=linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mturquette-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=pdeschrijver-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org \
--cc=rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).